On Wed, Jan 14, 2015 at 02:41:07PM +0100, Lukasz Majewski wrote:
> Properties necessary for providing Exynos thermal configuration via device
> tree.
>
> Signed-off-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
> ---
> Changes for v3:
> - New patch
>
> ---
> .../devicetree/bindings/thermal/exynos-thermal.txt | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
> index ae738f5..0f44932 100644
> --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
> @@ -39,6 +39,18 @@
> - vtmu-supply: This entry is optional and provides the regulator node supplying
> voltage to TMU. If needed this entry can be placed inside
> board/platform specific dts file.
> +Following properties are mandatory (depending on SoC):
> +- samsung,tmu_gain: Gain value for internal TMU operation.
> +- samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage
> +- samsung,tmu_noise_cancel_mode: Mode for noise cancellation
> +- samsung,tmu_efuse_value: Default level of temperature - it is needed when
> + in factory fusing produced wrong value
> +- samsung,tmu_min_efuse_value: Minimum temperature fused value
> +- samsung,tmu_max_efuse_value: Maximum temperature fused value
> +- samsung,tmu_first_point_trim: First point trimming value
> +- samsung,tmu_second_point_trim: Second point trimming value
> +- samsung,tmu_default_temp_offset: Default temperature offset
> +- samsung,tmu_cal_type: Callibration type
>
> Example 1):
>
> @@ -51,6 +63,7 @@ Example 1):
> clock-names = "tmu_apbif";
> status = "disabled";
> vtmu-supply = <&tmu_regulator_node>;
> + #include "exynos4412-tmu-sensor-conf.dtsi"
> };
>
> Example 2):
> @@ -61,6 +74,7 @@ Example 2):
> interrupts = <0 58 0>;
> clocks = <&clock 21>;
> clock-names = "tmu_apbif";
> + #include "exynos5440-tmu-sensor-conf.dtsi"
Did I miss something or at this point the above file does not exist yet?
Please make sure each commit / patch is in a compilable/usable/working
state.
> };
>
> Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
> @@ -70,6 +84,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
> interrupts = <0 184 0>;
> clocks = <&clock 318>, <&clock 318>;
> clock-names = "tmu_apbif", "tmu_triminfo_apbif";
> + #include "exynos4412-tmu-sensor-conf.dtsi"
> };
>
> tmu_cpu3: tmu@1006c000 {
> @@ -78,6 +93,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
> interrupts = <0 185 0>;
> clocks = <&clock 318>, <&clock 319>;
> clock-names = "tmu_apbif", "tmu_triminfo_apbif";
> + #include "exynos4412-tmu-sensor-conf.dtsi"
> };
>
> tmu_gpu: tmu@100a0000 {
> @@ -86,6 +102,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
> interrupts = <0 215 0>;
> clocks = <&clock 319>, <&clock 318>;
> clock-names = "tmu_apbif", "tmu_triminfo_apbif";
> + #include "exynos4412-tmu-sensor-conf.dtsi"
> };
>
> Note: For multi-instance tmu each instance should have an alias correctly
> --
> 2.0.0.rc2
>
Attachment:
signature.asc
Description: Digital signature
