Hi
On 09/29/2014 09:31 PM, Bartlomiej Zolnierkiewicz wrote:
>
> Hi,
>
> On Friday, August 29, 2014 01:34:44 PM Ulf Hansson wrote:
>> On 22 August 2014 15:47, Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxx> wrote:
>>> This patch makes use of mmc_regulator_get_supply() to handle
>>> the vmmc and vqmmc regulators.Also it moves the code handling
>>> the these regulators to dw_mci_set_ios().It turned on the vmmc
>>> and vqmmc during MMC_POWER_UP and MMC_POWER_ON,and turned off
>>> during MMC_POWER_OFF.
>>>
>>> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxxxx>
>>
>> Thanks! Applied for next.
>
> Unfortunately this patch breaks mmc1 card (Kingston 32GB micro SDHC)
> detection on Exynos5420 Arndale Octa for me:
>
> [ 10.797979] dwmmc_exynos 12220000.mmc: no support for card's volts
> [ 10.797998] mmc1: error -22 whilst initialising SD card
OCR value is not matched. Which values are supported about the mmc_host's value and card's value?
Could you share the value?
Best Regards,
Jaehoon Chung
>
> Without the patch:
>
> [ 10.866926] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
> [ 10.866977] mmc1: new high speed SDHC card at address 1234
> [ 10.868730] mmcblk1: mmc1:1234 SA32G 29.3 GiB
> [ 10.915054] mmcblk1: p1 p2 p3
>
> The config is attached (exynos_defconfig doesn't work correctly for
> this board yet).
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
>
>> Kind regards
>> Uffe
>>
>>> ---
>>> changes from v1:
>>> 1.Used mmc_regulator_set_ocr() instead of regulator_enable() for vmmc.
>>> 2.Turned on vmmc and vqmmc during MMC_POWER_UP.
>>> 3. Removed the flags DW_MMC_CARD_POWERED and DW_MMC_IO_POWERED which
>>> added during the initial version of this patch.
>>> 4. Added error message, if it failed to turn on regulator's.
>>>
>>> drivers/mmc/host/dw_mmc.c | 72 +++++++++++++++++++++-----------------------
>>> include/linux/mmc/dw_mmc.h | 2 +-
>>> 2 files changed, 36 insertions(+), 38 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>>> index 7f227e9..aadb0d6 100644
>>> --- a/drivers/mmc/host/dw_mmc.c
>>> +++ b/drivers/mmc/host/dw_mmc.c
>>> @@ -936,6 +936,7 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>>> struct dw_mci_slot *slot = mmc_priv(mmc);
>>> const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
>>> u32 regs;
>>> + int ret;
>>>
>>> switch (ios->bus_width) {
>>> case MMC_BUS_WIDTH_4:
>>> @@ -974,12 +975,38 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>>>
>>> switch (ios->power_mode) {
>>> case MMC_POWER_UP:
>>> + if (!IS_ERR(mmc->supply.vmmc)) {
>>> + ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
>>> + ios->vdd);
>>> + if (ret) {
>>> + dev_err(slot->host->dev,
>>> + "failed to enable vmmc regulator\n");
>>> + /*return, if failed turn on vmmc*/
>>> + return;
>>> + }
>>> + }
>>> + if (!IS_ERR(mmc->supply.vqmmc) && !slot->host->vqmmc_enabled) {
>>> + ret = regulator_enable(mmc->supply.vqmmc);
>>> + if (ret < 0)
>>> + dev_err(slot->host->dev,
>>> + "failed to enable vqmmc regulator\n");
>>> + else
>>> + slot->host->vqmmc_enabled = true;
>>> + }
>>> set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
>>> regs = mci_readl(slot->host, PWREN);
>>> regs |= (1 << slot->id);
>>> mci_writel(slot->host, PWREN, regs);
>>> break;
>>> case MMC_POWER_OFF:
>>> + if (!IS_ERR(mmc->supply.vmmc))
>>> + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
>>> +
>>> + if (!IS_ERR(mmc->supply.vqmmc) && slot->host->vqmmc_enabled) {
>>> + regulator_disable(mmc->supply.vqmmc);
>>> + slot->host->vqmmc_enabled = false;
>>> + }
>>> +
>>> regs = mci_readl(slot->host, PWREN);
>>> regs &= ~(1 << slot->id);
>>> mci_writel(slot->host, PWREN, regs);
>>> @@ -2110,7 +2137,13 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>>> mmc->f_max = freq[1];
>>> }
>>>
>>> - mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
>>> + /*if there are external regulators, get them*/
>>> + ret = mmc_regulator_get_supply(mmc);
>>> + if (ret == -EPROBE_DEFER)
>>> + goto err_setup_bus;
>>> +
>>> + if (!mmc->ocr_avail)
>>> + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
>>>
>>> if (host->pdata->caps)
>>> mmc->caps = host->pdata->caps;
>>> @@ -2176,7 +2209,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>>>
>>> err_setup_bus:
>>> mmc_free_host(mmc);
>>> - return -EINVAL;
>>> + return ret;
>>> }
>>>
>>> static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
>>> @@ -2469,24 +2502,6 @@ int dw_mci_probe(struct dw_mci *host)
>>> }
>>> }
>>>
>>> - host->vmmc = devm_regulator_get_optional(host->dev, "vmmc");
>>> - if (IS_ERR(host->vmmc)) {
>>> - ret = PTR_ERR(host->vmmc);
>>> - if (ret == -EPROBE_DEFER)
>>> - goto err_clk_ciu;
>>> -
>>> - dev_info(host->dev, "no vmmc regulator found: %d\n", ret);
>>> - host->vmmc = NULL;
>>> - } else {
>>> - ret = regulator_enable(host->vmmc);
>>> - if (ret) {
>>> - if (ret != -EPROBE_DEFER)
>>> - dev_err(host->dev,
>>> - "regulator_enable fail: %d\n", ret);
>>> - goto err_clk_ciu;
>>> - }
>>> - }
>>> -
>>> host->quirks = host->pdata->quirks;
>>>
>>> spin_lock_init(&host->lock);
>>> @@ -2630,8 +2645,6 @@ err_workqueue:
>>> err_dmaunmap:
>>> if (host->use_dma && host->dma_ops->exit)
>>> host->dma_ops->exit(host);
>>> - if (host->vmmc)
>>> - regulator_disable(host->vmmc);
>>>
>>> err_clk_ciu:
>>> if (!IS_ERR(host->ciu_clk))
>>> @@ -2667,9 +2680,6 @@ void dw_mci_remove(struct dw_mci *host)
>>> if (host->use_dma && host->dma_ops->exit)
>>> host->dma_ops->exit(host);
>>>
>>> - if (host->vmmc)
>>> - regulator_disable(host->vmmc);
>>> -
>>> if (!IS_ERR(host->ciu_clk))
>>> clk_disable_unprepare(host->ciu_clk);
>>>
>>> @@ -2686,9 +2696,6 @@ EXPORT_SYMBOL(dw_mci_remove);
>>> */
>>> int dw_mci_suspend(struct dw_mci *host)
>>> {
>>> - if (host->vmmc)
>>> - regulator_disable(host->vmmc);
>>> -
>>> return 0;
>>> }
>>> EXPORT_SYMBOL(dw_mci_suspend);
>>> @@ -2697,15 +2704,6 @@ int dw_mci_resume(struct dw_mci *host)
>>> {
>>> int i, ret;
>>>
>>> - if (host->vmmc) {
>>> - ret = regulator_enable(host->vmmc);
>>> - if (ret) {
>>> - dev_err(host->dev,
>>> - "failed to enable regulator: %d\n", ret);
>>> - return ret;
>>> - }
>>> - }
>>> -
>>> if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS)) {
>>> ret = -ENODEV;
>>> return ret;
>>> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
>>> index 29ce014..84e2827 100644
>>> --- a/include/linux/mmc/dw_mmc.h
>>> +++ b/include/linux/mmc/dw_mmc.h
>>> @@ -188,7 +188,7 @@ struct dw_mci {
>>> /* Workaround flags */
>>> u32 quirks;
>>>
>>> - struct regulator *vmmc; /* Power regulator */
>>> + bool vqmmc_enabled;
>>> unsigned long irq_flags; /* IRQ flags */
>>> int irq;
>>> };
>>> --
>>> 1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
