On 9 September 2014 08:58, <kgene@xxxxxxxxxx> wrote: > Naveen Krishna Chatradhi wrote: >> >> Add initial device tree nodes for EXYNOS7 SoC and board dts file >> to support Espresso board based on Exynos7 SoC. >> >> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx> >> Cc: Rob Herring <robh@xxxxxxxxxx> >> Cc: Catalin Marinas <catalin.marinas@xxxxxxx> >> --- >> arch/arm64/boot/dts/Makefile | 1 + >> arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 31 +++++ >> arch/arm64/boot/dts/exynos/exynos7.dtsi | 168 +++++++++++++++++++++++ >> 3 files changed, 200 insertions(+) >> create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts >> create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi > > [...] > >> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi >> new file mode 100644 >> index 0000000..e593af55 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi >> @@ -0,0 +1,168 @@ >> +/* >> + * SAMSUNG EXYNOS7 SoC device tree source >> + * >> + * Copyright (c) 2014 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +#include <dt-bindings/clock/exynos7-clk.h> >> + >> +/ { >> + compatible = "samsung,exynos7"; >> + interrupt-parent = <&gic>; >> + #address-cells = <2>; > > + #address-cells = <1>; ? > > Hmm...I can't see any 64-bit address here. All the SoC peripherals have been put into the soc node and ranges property in that node is used to convert 64-bit to 32-bit addresses. But since this is a 64-bit SoC, we use #address-cells as 2. > >> + #size-cells = <2>; >> + > > [...] > >> + >> + soc: soc { >> + compatible = "simple-bus"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges = <0 0 0 0x18000000>; >> + >> + chipid@10000000 { >> + compatible = "samsung,exynos4210-chipid"; >> + reg = <0x10000000 0x100>; >> + }; > > Maybe this is not required? There is no check chipid in arm/arm64. This is only describing the hardware and it does not depend on linux using this information. And support for chip id can be used later for 64-bit Exynos platforms as well. > > [...] > >> + timer { >> + compatible = "arm,armv8-timer"; >> + interrupts = <1 13 0xff01>, >> + <1 14 0xff01>, >> + <1 11 0xff01>, >> + <1 10 0xff01>; > > clock-frequency ? That is programmed by the bootloader / firmware. > > [...] > > - Kukjin > Thanks, -- Shine bright, (: Nav :) -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |