Hello Lee,
On 09/11/2014 10:00 AM, Sjoerd Simons wrote:
>> > >
>> > > -static const struct of_device_id mxt_of_match[] = {
>> > > - { .compatible = "atmel,maxtouch", },
>> > > - {},
>> > > -};
>> > > -MODULE_DEVICE_TABLE(of, mxt_of_match);
>> > > -
>> > > static const struct i2c_device_id mxt_id[] = {
>> > > { "qt602240_ts", 0 },
>> > > { "atmel_mxt_ts", 0 },
>> > > { "atmel_mxt_tp", 0 },
>> > > + { "maxtouch", 0 },
>> > > { "mXT224", 0 },
>> > > { }
>> > > };
>> > > @@ -2286,7 +2281,6 @@ static struct i2c_driver mxt_driver = {
>> > > .driver = {
>> > > .name = "atmel_mxt_ts",
>> > > .owner = THIS_MODULE,
>> > > - .of_match_table = of_match_ptr(mxt_of_match),
>> > > .pm = &mxt_pm_ops,
>> > > },
>> > > .probe = mxt_probe,
>> > >
>> >
>> > I see that Lee is working to allow the I2C subsystem to not need an I2C ID
>> > table to match [0]. I'll let Lee to comment what the future plans are and if
>> > his series are going to solve your issue since I'm not that familiar with the
>> > I2C core.
>>
>> It's wrong to expect DT to probe these devices without a compatible
>> string. It does so at the moment, but this is a bi-product and not
>> the correct method.
>
> Ok, which means removing the mxt_of_match table in this patch is wrong..
> I'll fix that for for a V2.
>
> However that makes adding the "maxtouch" string to the i2c device table
> somewhat cumbersome as it only gets added in this case to ensure
> module-autoloading can happen as the modalias presented to userspace is
> going still going to be i2c:maxtouch.
>
> Tbh, the bigger problem this is pointing out is that for I2C devices
> with only an OF compability tring module auto-loading is broken...
>
To expand on what Sjoerd already said and just to be sure everyone is on the
same page.
The problem is that right now the driver reports the following modalias:
# cat /sys/class/i2c-adapter/i2c-8/8-004b/modalias
i2c:maxtouch
but if you look at the module information, that is not a valid alias:
# modinfo atmel_mxt_ts | grep alias
alias: i2c:mXT224
alias: i2c:atmel_mxt_tp
alias: i2c:atmel_mxt_ts
alias: i2c:qt602240_ts
alias: of:N*T*Catmel,maxtouch*
which means that udev/kmod can't load the module automatically based on the
alias information.
The aliases are filled by both MODULE_DEVICE_TABLE(i2c, mxt_id) and
MODULE_DEVICE_TABLE(of, mxt_of_match) so after Sjoerd's patch:
# cat /sys/class/i2c-adapter/i2c-8/8-004b/modalias
i2c:maxtouch
# modinfo atmel_mxt_ts | grep alias
alias: i2c:mXT224
alias: i2c:maxtouch
alias: i2c:atmel_mxt_tp
alias: i2c:atmel_mxt_ts
alias: i2c:qt602240_ts
which matches the reported uevent so the module will be auto-loaded.
This is because the I2C subsystem hardcodes i2c:<client->name>, if you look at
drivers/i2c/i2c-core.c:
/* uevent helps with hotplug: modprobe -q $(MODALIAS) */
static int i2c_device_uevent(struct device *dev, struct kobj_uevent_env *env)
{
...
if (add_uevent_var(env, "MODALIAS=%s%s",
I2C_MODULE_PREFIX, client->name))
...
}
I've looked at Lee's series and AFAICT that remains the same so I second
Sjoerd that module auto-loading will continue to be broken.
Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
