On Thu, Aug 28, 2014 at 02:10:18PM +0100, Thierry Reding wrote: > On Thu, Aug 28, 2014 at 03:04:32PM +0530, Ajay kumar wrote: > > On Thu, Aug 28, 2014 at 2:45 PM, Mark Rutland <mark.rutland@xxxxxxx> wrote: > > > On Thu, Aug 28, 2014 at 06:34:33AM +0100, Ajay kumar wrote: > > >> On Wed, Aug 27, 2014 at 8:31 PM, Mark Rutland <mark.rutland@xxxxxxx> wrote: > > >> > On Wed, Aug 27, 2014 at 03:48:27PM +0100, Ajay Kumar wrote: > > >> >> Add DT nodes for ptn3460 bridge chip and panel. > > >> >> Add backlight enable pin and backlight power supply for pwm-backlight. > > >> >> Also add bridge phandle needed by dp to enable display on snow. > > >> >> > > >> >> Note that, snow doesn't support "chunghwa,claa101wb01" panel, > > >> >> but still we choose to reuse the binding since "chunghwa,claa101wb01" > > >> >> has similar LCD timings. > > >> > > > >> > What does it actually have? > > >> > > > >> > It's fine to have "chunghwa,claa101wb01" as a fallback but we should > > >> > have an identifier for the actual display, too. > > >> Actual display used is "AUO,B116XTN0", for which no data currently exists > > >> in panel file. Instead of adding a new panel_desc for B116XTN0, > > >> why not we reuse existing ones? what is the "identifier" you are talking about? > > > > > > The compatible string. > > > > > > So in the dts we'd have compatible = "au0,b116xtn0", "chunghwa,claa101wb01"; > > Sorry, hardware engineer says actual LCD name is "auo,b116xw03". > > > > > That way if we need specific data we can add it later. > > I think we can add a new panel_desc for "auo,b116xw03". > > Because its actual LCD dimension is 256x144, but "chungwa, claa101wb01" has > > LCD dimension 223x125. > > What is Thierry's opinion on adding this new LCD? > > I think you should simply add a new panel_desc for the panel. It may use > similar timings, but it's likely not "compatible" in the way required by > device tree. As you say, dimensions are different and those may have an > influence on the DPI setting. There's really no reason why this should > share the panel_desc with another panel. > > Thierry This sounds sane to me. Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |