[PATCH v2 2/2] usb: host: ohci-exynos: Remove unnecessary usb-phy support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Now that we have completely moved from older USB-PHY drivers
to newer GENERIC-PHY drivers for PHYs available with USB controllers
on Exynos series of SoCs, we can remove the support for the same
in our host drivers too.
This should fix the issue on ohci-exynos, wherein in the absence of
SAMSUNG_USB2PHY config symbol, we ended up getting the NOP_USB_XCEIV phy
when the same is enabled. And thus the PHYs are not configured properly.

Reported-by: Sachin Kamat <sachin.kamat@xxxxxxxxxxx>
Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Reviewed-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
---

 - This patch was part of the series "[PATCH 0/7] usb-phy: samsung: Cleanup the unused drivers"
   https://lkml.org/lkml/2014/8/14/235. I have dropped the phy cleanup patches from that series-
   Patches 1-5.
 - Rebased this patch on top of 3.17-rc1.

 drivers/usb/host/ohci-exynos.c |   64 ++++++----------------------------------
 1 file changed, 9 insertions(+), 55 deletions(-)

diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index a72ab8f..0199a8b 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -19,11 +19,8 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/samsung_usb_phy.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
-#include <linux/usb/otg.h>
 
 #include "ohci.h"
 
@@ -38,9 +35,7 @@ static struct hc_driver __read_mostly exynos_ohci_hc_driver;
 
 struct exynos_ohci_hcd {
 	struct clk *clk;
-	struct usb_phy *phy;
-	struct usb_otg *otg;
-	struct phy *phy_g[PHY_NUMBER];
+	struct phy *phy[PHY_NUMBER];
 };
 
 static int exynos_ohci_get_phy(struct device *dev,
@@ -51,28 +46,7 @@ static int exynos_ohci_get_phy(struct device *dev,
 	int phy_number;
 	int ret = 0;
 
-	exynos_ohci->phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
-	if (IS_ERR(exynos_ohci->phy)) {
-		ret = PTR_ERR(exynos_ohci->phy);
-		if (ret != -ENXIO && ret != -ENODEV) {
-			dev_err(dev, "no usb2 phy configured\n");
-			return ret;
-		}
-		dev_dbg(dev, "Failed to get usb2 phy\n");
-	} else {
-		exynos_ohci->otg = exynos_ohci->phy->otg;
-	}
-
-	/*
-	 * Getting generic phy:
-	 * We are keeping both types of phys as a part of transiting OHCI
-	 * to generic phy framework, so as to maintain backward compatibilty
-	 * with old DTB.
-	 * If there are existing devices using DTB files built from them,
-	 * to remove the support for old bindings in this driver,
-	 * we need to make sure that such devices have their DTBs
-	 * updated to ones built from new DTS.
-	 */
+	/* Get the generic phys */
 	for_each_available_child_of_node(dev->of_node, child) {
 		ret = of_property_read_u32(child, "reg", &phy_number);
 		if (ret) {
@@ -97,7 +71,7 @@ static int exynos_ohci_get_phy(struct device *dev,
 			}
 			dev_dbg(dev, "Failed to get usb2 phy\n");
 		}
-		exynos_ohci->phy_g[phy_number] = phy;
+		exynos_ohci->phy[phy_number] = phy;
 	}
 
 	return ret;
@@ -110,16 +84,13 @@ static int exynos_ohci_phy_enable(struct device *dev)
 	int i;
 	int ret = 0;
 
-	if (!IS_ERR(exynos_ohci->phy))
-		return usb_phy_init(exynos_ohci->phy);
-
 	for (i = 0; ret == 0 && i < PHY_NUMBER; i++)
-		if (!IS_ERR(exynos_ohci->phy_g[i]))
-			ret = phy_power_on(exynos_ohci->phy_g[i]);
+		if (!IS_ERR(exynos_ohci->phy[i]))
+			ret = phy_power_on(exynos_ohci->phy[i]);
 	if (ret)
 		for (i--; i >= 0; i--)
-			if (!IS_ERR(exynos_ohci->phy_g[i]))
-				phy_power_off(exynos_ohci->phy_g[i]);
+			if (!IS_ERR(exynos_ohci->phy[i]))
+				phy_power_off(exynos_ohci->phy[i]);
 
 	return ret;
 }
@@ -130,14 +101,9 @@ static void exynos_ohci_phy_disable(struct device *dev)
 	struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
 	int i;
 
-	if (!IS_ERR(exynos_ohci->phy)) {
-		usb_phy_shutdown(exynos_ohci->phy);
-		return;
-	}
-
 	for (i = 0; i < PHY_NUMBER; i++)
-		if (!IS_ERR(exynos_ohci->phy_g[i]))
-			phy_power_off(exynos_ohci->phy_g[i]);
+		if (!IS_ERR(exynos_ohci->phy[i]))
+			phy_power_off(exynos_ohci->phy[i]);
 }
 
 static int exynos_ohci_probe(struct platform_device *pdev)
@@ -209,9 +175,6 @@ skip_phy:
 		goto fail_io;
 	}
 
-	if (exynos_ohci->otg)
-		exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
-
 	platform_set_drvdata(pdev, hcd);
 
 	err = exynos_ohci_phy_enable(&pdev->dev);
@@ -244,9 +207,6 @@ static int exynos_ohci_remove(struct platform_device *pdev)
 
 	usb_remove_hcd(hcd);
 
-	if (exynos_ohci->otg)
-		exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
-
 	exynos_ohci_phy_disable(&pdev->dev);
 
 	clk_disable_unprepare(exynos_ohci->clk);
@@ -275,9 +235,6 @@ static int exynos_ohci_suspend(struct device *dev)
 	if (rc)
 		return rc;
 
-	if (exynos_ohci->otg)
-		exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
-
 	exynos_ohci_phy_disable(dev);
 
 	clk_disable_unprepare(exynos_ohci->clk);
@@ -293,9 +250,6 @@ static int exynos_ohci_resume(struct device *dev)
 
 	clk_prepare_enable(exynos_ohci->clk);
 
-	if (exynos_ohci->otg)
-		exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
-
 	ret = exynos_ohci_phy_enable(dev);
 	if (ret) {
 		dev_err(dev, "Failed to enable USB phy\n");
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux