Use the new style of referencing inherited nodes, use symbolic names,
tidy indentation and reorder includes.
Goal is the alignment of all exynos5250 based device trees for comparison.
Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
---
v5: New
Aligns with SMDK.
arch/arm/boot/dts/exynos5250-arndale.dts | 929 ++++++++++++++++---------------
1 file changed, 466 insertions(+), 463 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index d0de1f50d15b..3a608f57f833 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -7,12 +7,13 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
-#include "exynos5250.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
/ {
model = "Insignal Arndale evaluation board based on EXYNOS5250";
@@ -26,473 +27,52 @@
bootargs = "console=ttySAC2,115200";
};
- rtc@101E0000 {
- status = "okay";
- };
-
- codec@11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- };
-
- i2c@12C60000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- samsung,i2c-slave-addr = <0x66>;
- status = "okay";
-
- s5m8767_pmic@66 {
- compatible = "samsung,s5m8767-pmic";
- reg = <0x66>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
- vinb1-supply = <&main_dc_reg>;
- vinb2-supply = <&main_dc_reg>;
- vinb3-supply = <&main_dc_reg>;
- vinb4-supply = <&main_dc_reg>;
- vinb5-supply = <&main_dc_reg>;
- vinb6-supply = <&main_dc_reg>;
- vinb7-supply = <&main_dc_reg>;
- vinb8-supply = <&main_dc_reg>;
- vinb9-supply = <&main_dc_reg>;
-
- vinl1-supply = <&buck7_reg>;
- vinl2-supply = <&buck7_reg>;
- vinl3-supply = <&buck7_reg>;
- vinl4-supply = <&main_dc_reg>;
- vinl5-supply = <&main_dc_reg>;
- vinl6-supply = <&main_dc_reg>;
- vinl7-supply = <&main_dc_reg>;
- vinl8-supply = <&buck8_reg>;
- vinl9-supply = <&buck8_reg>;
-
- s5m8767,pmic-buck2-dvs-voltage = <1300000>;
- s5m8767,pmic-buck3-dvs-voltage = <1100000>;
- s5m8767,pmic-buck4-dvs-voltage = <1200000>;
- s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>,
- <&gpd1 1 0>,
- <&gpd1 2 0>;
- s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>,
- <&gpx2 4 0>,
- <&gpx2 5 0>;
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE_1.0V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDD_28IO_DP_1.35V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "VDD_COMMON1_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "VDD_IOPERI_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "VDD_EXT_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "VDD_MPLL_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "VDD_XPLL_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "VDD_COMMON2_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "VDD_33ON_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- op_mode = <1>;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "VDD_COMMON3_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "VDD_ABB2_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "VDD_USB_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "VDDQ_C2C_W_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "VDD18_ABB0_3_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "VDD10_COMMON4_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "VDD18_HSIC_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "VDDQ_MMC2_3_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "VDD_33ON_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- op_mode = <1>;
- };
-
- ldo22_reg: LDO22 {
- regulator-name = "EXT_33_OFF";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- op_mode = <1>;
- };
-
- ldo23_reg: LDO23 {
- regulator-name = "EXT_28_OFF";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- op_mode = <1>;
- };
-
- ldo25_reg: LDO25 {
- regulator-name = "PVDD_LDO25";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- op_mode = <1>;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "EXT_18_OFF";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- op_mode = <1>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <912500>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "VDD_MEM_1.35V";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1355000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "PVDD_BUCK7";
- regulator-always-on;
- op_mode = <1>;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "PVDD_BUCK8";
- regulator-always-on;
- op_mode = <1>;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "VDD_33_OFF_EXT1";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <3000000>;
- op_mode = <1>;
- };
- };
- };
- };
-
- i2c@12C80000 {
- status = "okay";
-
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x50>;
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
-
- i2c@12C90000 {
- status = "okay";
-
- wm1811a@1a {
-
- compatible = "wlf,wm1811";
- reg = <0x1a>;
-
- AVDD2-supply = <&main_dc_reg>;
- CPVDD-supply = <&main_dc_reg>;
- DBVDD1-supply = <&main_dc_reg>;
- DBVDD2-supply = <&main_dc_reg>;
- DBVDD3-supply = <&main_dc_reg>;
- LDO1VDD-supply = <&main_dc_reg>;
- SPKVDD1-supply = <&main_dc_reg>;
- SPKVDD2-supply = <&main_dc_reg>;
-
- wlf,ldo1ena = <&gpb0 0 0>;
- wlf,ldo2ena = <&gpb0 1 0>;
- };
- };
-
- i2c@12CE0000 {
- status = "okay";
-
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x38>;
-
- hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
-
- i2c@121D0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
-
- sata_phy_i2c:sata-phy@38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
- };
-
- sata@122F0000 {
- status = "okay";
- };
-
- sata-phy@12170000 {
- status = "okay";
- samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
- };
-
- mmc_0: mmc@12200000 {
- status = "okay";
- num-slots = <1>;
- supports-highspeed;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- vmmc-supply = <&mmc_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
- slot@0 {
- reg = <0>;
- bus-width = <8>;
- };
- };
-
- mmc_2: mmc@12220000 {
- status = "okay";
- num-slots = <1>;
- supports-highspeed;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- vmmc-supply = <&mmc_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
- };
- };
-
- i2s0: i2s@03830000 {
- status = "okay";
- };
-
gpio_keys {
compatible = "gpio-keys";
menu {
label = "SW-TACT2";
- gpios = <&gpx1 4 1>;
+ gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
gpio-key,wakeup;
};
home {
label = "SW-TACT3";
- gpios = <&gpx1 5 1>;
+ gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
gpio-key,wakeup;
};
up {
label = "SW-TACT4";
- gpios = <&gpx1 6 1>;
+ gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_UP>;
gpio-key,wakeup;
};
down {
label = "SW-TACT5";
- gpios = <&gpx1 7 1>;
+ gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_DOWN>;
gpio-key,wakeup;
};
back {
label = "SW-TACT6";
- gpios = <&gpx2 0 1>;
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
gpio-key,wakeup;
};
wakeup {
label = "SW-TACT7";
- gpios = <&gpx2 1 1>;
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
gpio-key,wakeup;
};
};
- hdmi {
- hpd-gpio = <&gpx3 7 2>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- vdd-supply = <&ldo8_reg>;
- };
-
regulators {
compatible = "simple-bus";
#address-cells = <1>;
@@ -510,7 +90,7 @@
regulator-name = "VDD_33ON_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 1>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
enable-active-high;
};
@@ -528,35 +108,6 @@
};
};
- dp-controller@145B0000 {
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
- status = "okay";
- };
-
- fimd: fimd@14400000 {
- status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing@0 {
- /* 2560x1600 DP panel */
- clock-frequency = <50000>;
- hactive = <2560>;
- vactive = <1600>;
- hfront-porch = <48>;
- hback-porch = <80>;
- hsync-len = <32>;
- vback-porch = <16>;
- vfront-porch = <8>;
- vsync-len = <6>;
- };
- };
- };
-
usb_hub_bus {
compatible = "simple-bus";
#address-cells = <1>;
@@ -566,12 +117,464 @@
usb_hub: usb_hub {
compatible = "smsc,usb3503a";
- reset-gpios = <&gpx3 5 1>;
- connect-gpios = <&gpd1 7 1>;
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&codec {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&dp {
+ status = "okay";
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+};
+
+&ehci {
+ usb-phy = <&usb2_phy>;
+};
+
+&fimd {
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing@0 {
+ /* 2560x1600 DP panel */
+ clock-frequency = <50000>;
+ hactive = <2560>;
+ vactive = <1600>;
+ hfront-porch = <48>;
+ hback-porch = <80>;
+ hsync-len = <32>;
+ vback-porch = <16>;
+ vfront-porch = <8>;
+ vsync-len = <6>;
+ };
+ };
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 2>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+ vdd-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ samsung,i2c-slave-addr = <0x66>;
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ vinb1-supply = <&main_dc_reg>;
+ vinb2-supply = <&main_dc_reg>;
+ vinb3-supply = <&main_dc_reg>;
+ vinb4-supply = <&main_dc_reg>;
+ vinb5-supply = <&main_dc_reg>;
+ vinb6-supply = <&main_dc_reg>;
+ vinb7-supply = <&main_dc_reg>;
+ vinb8-supply = <&main_dc_reg>;
+ vinb9-supply = <&main_dc_reg>;
+
+ vinl1-supply = <&buck7_reg>;
+ vinl2-supply = <&buck7_reg>;
+ vinl3-supply = <&buck7_reg>;
+ vinl4-supply = <&main_dc_reg>;
+ vinl5-supply = <&main_dc_reg>;
+ vinl6-supply = <&main_dc_reg>;
+ vinl7-supply = <&main_dc_reg>;
+ vinl8-supply = <&buck8_reg>;
+ vinl9-supply = <&buck8_reg>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1300000>;
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>;
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>;
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
+ <&gpd1 1 GPIO_ACTIVE_HIGH>,
+ <&gpd1 2 GPIO_ACTIVE_HIGH>;
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+ <&gpx2 4 GPIO_ACTIVE_HIGH>,
+ <&gpx2 5 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_28IO_DP_1.35V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD_COMMON1_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD_IOPERI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD_EXT_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD_MPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD_XPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD_COMMON2_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD_33ON_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD_COMMON3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_ABB2_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_USB_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDQ_C2C_W_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB0_3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_COMMON4_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDDQ_MMC2_3_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "VDD_33ON_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "EXT_33_OFF";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "EXT_28_OFF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "PVDD_LDO25";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ op_mode = <1>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "EXT_18_OFF";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <1>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_MEM_1.35V";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1355000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "PVDD_BUCK7";
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "PVDD_BUCK8";
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VDD_33_OFF_EXT1";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
+ };
};
};
+};
+
+&i2c_2 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x50>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+
+ wm1811a@1a {
+ compatible = "wlf,wm1811";
+ reg = <0x1a>;
+
+ AVDD2-supply = <&main_dc_reg>;
+ CPVDD-supply = <&main_dc_reg>;
+ DBVDD1-supply = <&main_dc_reg>;
+ DBVDD2-supply = <&main_dc_reg>;
+ DBVDD3-supply = <&main_dc_reg>;
+ LDO1VDD-supply = <&main_dc_reg>;
+ SPKVDD1-supply = <&main_dc_reg>;
+ SPKVDD2-supply = <&main_dc_reg>;
+
+ wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
+ wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c_8 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2c_9 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <40000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ sata_phy_i2c:sata-phy@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ vmmc-supply = <&mmc_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
- usb@12110000 {
- usb-phy = <&usb2_phy>;
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ vmmc-supply = <&mmc_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
};
};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
