There's no need for a simple-bus, place the smsc,usb3503a directly into
the root node. That's what we're going to do on exynos5250-spring.
Reported-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
---
v5: New
Aligns with Spring's new USB3503 node.
arch/arm/boot/dts/exynos5250-arndale.dts | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index a04a875346aa..9912d27492db 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -108,18 +108,12 @@
};
};
- usb_hub_bus {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ // SMSC USB3503 connected in hardware only mode as a PHY
+ usb_hub: usb-hub {
+ compatible = "smsc,usb3503a";
- // SMSC USB3503 connected in hardware only mode as a PHY
- usb_hub: usb_hub {
- compatible = "smsc,usb3503a";
-
- reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
- connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
- };
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
};
};
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
