RE: [PATCH v2] mmc: dw_mmc: Make sure we don't get stuck when we get an error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Chris & Ulf,

I hope you find this patch for next.

Thanks,
Seungwon Jeon

On Wed, May 21, 2014, Seungwon Jeon wrote:
> On Wed, May 21, 2014, Doug Anderson wrote:
> > If we happened to get a data error at just the wrong time the dw_mmc
> > driver could get into a state where it would never complete its
> > request.  That would leave the caller just hanging there.
> >
> > We fix this two ways and both of the two fixes on their own appear to
> > fix the problems we've seen:
> >
> > 1. Fix a race in the tasklet where the interrupt setting the data
> >    error happens _just after_ we check for it, then we get a
> >    EVENT_XFER_COMPLETE.  We fix this by repeating a bit of code.
> > 2. Fix it so that if we detect that we've got an error in the "data
> >    busy" state and we're not going to do anything else we end the
> >    request and unblock anyone waiting.
> >
> > Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
> > Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxx>
> 
> It will be applied after "mmc: dw_mmc: change to use recommended reset procedure"
> 
> Acked-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
> 
> Thanks,
> Seungwon Jeon
> 
> > ---
> > Changes in v2:
> > - Removed TODO
> > - Set cmd to NULL before calling dw_mci_request_end()
> >
> >  drivers/mmc/host/dw_mmc.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 46 insertions(+)
> >
> > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> > index cced599..54ec8b0 100644
> > --- a/drivers/mmc/host/dw_mmc.c
> > +++ b/drivers/mmc/host/dw_mmc.c
> > @@ -1318,6 +1318,14 @@ static void dw_mci_tasklet_func(unsigned long priv)
> >  			/* fall through */
> >
> >  		case STATE_SENDING_DATA:
> > +			/*
> > +			 * We could get a data error and never a transfer
> > +			 * complete so we'd better check for it here.
> > +			 *
> > +			 * Note that we don't really care if we also got a
> > +			 * transfer complete; stopping the DMA and sending an
> > +			 * abort won't hurt.
> > +			 */
> >  			if (test_and_clear_bit(EVENT_DATA_ERROR,
> >  					       &host->pending_events)) {
> >  				dw_mci_stop_dma(host);
> > @@ -1331,7 +1339,29 @@ static void dw_mci_tasklet_func(unsigned long priv)
> >  				break;
> >
> >  			set_bit(EVENT_XFER_COMPLETE, &host->completed_events);
> > +
> > +			/*
> > +			 * Handle an EVENT_DATA_ERROR that might have shown up
> > +			 * before the transfer completed.  This might not have
> > +			 * been caught by the check above because the interrupt
> > +			 * could have gone off between the previous check and
> > +			 * the check for transfer complete.
> > +			 *
> > +			 * Technically this ought not be needed assuming we
> > +			 * get a DATA_COMPLETE eventually (we'll notice the
> > +			 * error and end the request), but it shouldn't hurt.
> > +			 *
> > +			 * This has the advantage of sending the stop command.
> > +			 */
> > +			if (test_and_clear_bit(EVENT_DATA_ERROR,
> > +					       &host->pending_events)) {
> > +				dw_mci_stop_dma(host);
> > +				send_stop_abort(host, data);
> > +				state = STATE_DATA_ERROR;
> > +				break;
> > +			}
> >  			prev_state = state = STATE_DATA_BUSY;
> > +
> >  			/* fall through */
> >
> >  		case STATE_DATA_BUSY:
> > @@ -1354,6 +1384,22 @@ static void dw_mci_tasklet_func(unsigned long priv)
> >  				/* stop command for open-ended transfer*/
> >  				if (data->stop)
> >  					send_stop_abort(host, data);
> > +			} else {
> > +				/*
> > +				 * If we don't have a command complete now we'll
> > +				 * never get one since we just reset everything;
> > +				 * better end the request.
> > +				 *
> > +				 * If we do have a command complete we'll fall
> > +				 * through to the SENDING_STOP command and
> > +				 * everything will be peachy keen.
> > +				 */
> > +				if (!test_bit(EVENT_CMD_COMPLETE,
> > +					      &host->pending_events)) {
> > +					host->cmd = NULL;
> > +					dw_mci_request_end(host, mrq);
> > +					goto unlock;
> > +				}
> >  			}
> >
> >  			/*
> > --
> > 1.9.1.423.g4596e3a
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux