Re: [PATCH v6 17/23] mfd: max77686: Add Maxim 77802 PMIC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Krzysztof,

On 07/04/2014 01:30 PM, Krzysztof Kozlowski wrote:
> On pią, 2014-07-04 at 11:55 +0200, Javier Martinez Canillas wrote:
>> Maxim MAX77802 is a power management chip that contains 10 high
>> efficiency Buck regulators, 32 Low-dropout (LDO) regulators used
>> to power up application processors and peripherals, a 2-channel
>> 32kHz clock outputs, a Real-Time-Clock (RTC) and a I2C interface
>> to program the individual regulators, clocks outputs and the RTC.
>> 
>> This patch adds support for MAX77802 to the MAX77686 driver and is
>> based on a driver added to the Chrome OS kernel 3.8 by Simon Glass.
>> 
>> Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
>> ---
>> 
>>     NOTE: I didn't carry previous {Review,Acked,Tested}-by tags since
>>     this patch extending MAX77686 is quite different than the old one
>>     adding a new mfd driver. So review and test is highly appreciated.
>> 
>>     Changes since v5:
>>      - Extend the 77686 driver to support 77802 instead of adding a new driver.
>>        Suggested by Lee Jones.
>> 
>>     Changes since v4:
>>      - Use consistent expressions when checking for NULL values.
>>        Suggested by Krzysztof Kozlowski.
>>      - Remove unused defines. Suggested by Krzysztof Kozlowski.
>>      - Explain why IRQ is disabled on suspend. Suggested by Krzysztof Kozlowski.
>> 
>>     Changes since v3:
>>      - Remove unnecessary OOM error message since the mm subsystem already logs it.
>> 
>>     Changes since v2:
>>      - Split the DT binding docs in a separate patch and improve the documentation.
>>        Suggested by Mark Brown.
>>      - Add all the devices in the MFD driver instead of doing in separate patches.
>>        Suggested by Mark Brown.
>> 
>>     Changes since v1:
>>      - Convert max77{686,802} to regmap irq API and get rid of max77{686,802}-irq.c
>>        Suggested by Krzysztof Kozlowski.
>>      - Don't protect max77802 mfd_cells using Kconfig options since mfd core omits
>>        devices that don't match. Suggested by Lee Jones.
>>      - Change mfd driver to be tristate instead of boolean. Suggested by Mark Brown.
>>      - Change binding "voltage-regulators" property to "regulators" to be consistent
>>        with other PMIC drivers. Suggested by Mark Brown.
>>      - Use regulators node names instead of the deprecated "regulator-compatible"
>>        property. Suggested by Mark Brown.
>>      - Use the new descriptor-based GPIO interface instead of the deprecated
>> ---
>>  drivers/mfd/Kconfig                  |   6 +-
>>  drivers/mfd/max77686.c               | 187 ++++++++++++++++++++++++++-----
>>  include/linux/mfd/max77686-private.h | 208 ++++++++++++++++++++++++++++++++++-
>>  include/linux/mfd/max77686.h         |  60 +++++++++-
>>  4 files changed, 428 insertions(+), 33 deletions(-)
>> 
> 
> Three comments below, after fixing:
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> 
> (...)
> 
>> @@ -55,6 +123,17 @@ static struct regmap_config max77686_rtc_regmap_config = {
>>  	.val_bits = 8,
>>  };
>>  
>> +static struct regmap_config max77802_regmap_config = {
>> +	.reg_bits = 8,
>> +	.val_bits = 8,
>> +	.writeable_reg = max77802_is_accessible_reg,
>> +	.readable_reg = max77802_is_accessible_reg,
>> +	.precious_reg = max77802_is_precious_reg,
>> +	.volatile_reg = max77802_is_volatile_reg,
>> +	.name = "max77802-pmic",
>> +	.cache_type = REGCACHE_RBTREE,
>> +};
>> +
>>  static const struct regmap_irq max77686_irqs[] = {
>>  	/* INT1 interrupts */
>>  	{ .reg_offset = 0, .mask = MAX77686_INT1_PWRONF_MSK, },
>> @@ -98,9 +177,34 @@ static const struct regmap_irq_chip max77686_rtc_irq_chip = {
>>  	.num_irqs		= ARRAY_SIZE(max77686_rtc_irqs),
>>  };
>>  
>> +static const struct regmap_irq_chip max77802_irq_chip = {
>> +	.name			= "max77802-pmic",
>> +	.status_base		= MAX77802_REG_INT1,
>> +	.mask_base		= MAX77802_REG_INT1MSK,
>> +	.num_regs		= 2,
>> +	.irqs			= max77686_irqs, /* same masks than 77686 */
> 
> "same masks as 77686"
>

Ok

>> +	.num_irqs		= ARRAY_SIZE(max77686_irqs),
>> +};
>> +
>> +static const struct regmap_irq_chip max77802_rtc_irq_chip = {
>> +	.name			= "max77802-rtc",
>> +	.status_base		= MAX77802_RTC_INT,
>> +	.mask_base		= MAX77802_RTC_INTM,
>> +	.num_regs		= 1,
>> +	.irqs			= max77686_rtc_irqs, /* same masks than 77686 */
> 
> Ditto
> 

Ok

>> +	.num_irqs		= ARRAY_SIZE(max77686_rtc_irqs),
>> +};
>> +
>>  static const struct of_device_id max77686_pmic_dt_match[] = {
>> -	{.compatible = "maxim,max77686", .data = NULL},
>> -	{},
>> +	{
>> +		.compatible = "maxim,max77686",
>> +		.data = (void *)TYPE_MAX77686,
>> +	},
>> +	{
>> +		.compatible = "maxim,max77802",
>> +		.data = (void *)TYPE_MAX77802,
>> +	},
>> +	{ },
>>  };
>>  
>>  static void max77686_dt_parse_dvs_gpio(struct device *dev)
>> @@ -236,6 +340,12 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
>>  	struct max77686_platform_data *pdata = dev_get_platdata(&i2c->dev);
>>  	unsigned int data;
>>  	int ret = 0;
>> +	const struct regmap_config *config;
>> +	const struct regmap_irq_chip *irq_chip;
>> +	const struct regmap_irq_chip *rtc_irq_chip;
>> +	struct regmap **rtc_regmap;
>> +	const struct mfd_cell *cells;
>> +	int n_devs;
>>  
>>  	if (IS_ENABLED(CONFIG_OF) && i2c->dev.of_node && !pdata)
>>  		pdata = max77686_i2c_parse_dt_pdata(&i2c->dev);
>> @@ -258,56 +368,77 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
>>  	max77686->wakeup = pdata->wakeup;
>>  	max77686->irq = i2c->irq;
>>  
>> -	max77686->regmap = devm_regmap_init_i2c(i2c, &max77686_regmap_config);
>> +	if (max77686->type == TYPE_MAX77686) {
>> +		config = &max77686_regmap_config;
>> +		irq_chip = &max77686_irq_chip;
>> +		rtc_irq_chip = &max77686_rtc_irq_chip;
>> +		rtc_regmap = &max77686->rtc_regmap;
>> +		cells =  max77686_devs;
>> +		n_devs = ARRAY_SIZE(max77686_devs);
>> +	} else {
>> +		config = &max77802_regmap_config;
>> +		irq_chip = &max77802_irq_chip;
>> +		rtc_irq_chip = &max77802_rtc_irq_chip;
>> +		rtc_regmap = &max77686->regmap;
>> +		cells =  max77802_devs;
>> +		n_devs = ARRAY_SIZE(max77802_devs);
>> +	}
>> +
>> +	max77686->regmap = devm_regmap_init_i2c(i2c, config);
>>  	if (IS_ERR(max77686->regmap)) {
>>  		ret = PTR_ERR(max77686->regmap);
>>  		dev_err(max77686->dev, "Failed to allocate register map: %d\n",
>> -				ret);
>> +			ret);
>>  		return ret;
>>  	}
>>  
>>  	ret = regmap_read(max77686->regmap, MAX77686_REG_DEVICE_ID, &data);
>>  	if (ret < 0) {
>>  		dev_err(max77686->dev,
>> -			"device not found on this channel (this is not an error)\n");
>> -		return -ENODEV;
>> -	}
>> -
>> -	max77686->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
>> -	if (!max77686->rtc) {
>> -		dev_err(max77686->dev, "Failed to allocate I2C device for RTC\n");
>> +			"device not found on this channel\n");
>>  		return -ENODEV;
>>  	}
>> -	i2c_set_clientdata(max77686->rtc, max77686);
>>  
>> -	max77686->rtc_regmap = devm_regmap_init_i2c(max77686->rtc,
>> -						    &max77686_rtc_regmap_config);
>> -	if (IS_ERR(max77686->rtc_regmap)) {
>> -		ret = PTR_ERR(max77686->rtc_regmap);
>> -		dev_err(max77686->dev, "failed to allocate RTC regmap: %d\n",
>> -			ret);
>> -		goto err_unregister_i2c;
>> +	if (max77686->type == TYPE_MAX77686) {
>> +		max77686->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
>> +		if (!max77686->rtc) {
>> +			dev_err(max77686->dev,
>> +				"Failed to allocate I2C device for RTC\n");
>> +			return -ENODEV;
>> +		}
>> +		i2c_set_clientdata(max77686->rtc, max77686);
>> +
>> +		max77686->rtc_regmap =
>> +			devm_regmap_init_i2c(max77686->rtc,
>> +					     &max77686_rtc_regmap_config);
>> +		if (IS_ERR(max77686->rtc_regmap)) {
>> +			ret = PTR_ERR(max77686->rtc_regmap);
>> +			dev_err(max77686->dev,
>> +				"failed to allocate RTC regmap: %d\n",
>> +				ret);
>> +			goto err_unregister_i2c;
>> +		}
>>  	}
>>  
>>  	ret = regmap_add_irq_chip(max77686->regmap, max77686->irq,
>>  				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
>> -				  IRQF_SHARED, 0, &max77686_irq_chip,
>> +				  IRQF_SHARED, 0, irq_chip,
>>  				  &max77686->irq_data);
>>  	if (ret) {
>>  		dev_err(&i2c->dev, "failed to add PMIC irq chip: %d\n", ret);
>>  		goto err_unregister_i2c;
>>  	}
>> -	ret = regmap_add_irq_chip(max77686->rtc_regmap, max77686->irq,
>> +
>> +	ret = regmap_add_irq_chip(*rtc_regmap, max77686->irq,
>>  				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
>> -				  IRQF_SHARED, 0, &max77686_rtc_irq_chip,
>> +				  IRQF_SHARED, 0, rtc_irq_chip,
>>  				  &max77686->rtc_irq_data);
>>  	if (ret) {
>>  		dev_err(&i2c->dev, "failed to add RTC irq chip: %d\n", ret);
>>  		goto err_del_irqc;
>>  	}
>>  
>> -	ret = mfd_add_devices(max77686->dev, -1, max77686_devs,
>> -			      ARRAY_SIZE(max77686_devs), NULL, 0, NULL);
>> +	ret = mfd_add_devices(max77686->dev, -1, cells, n_devs, NULL, 0, NULL);
>>  	if (ret < 0) {
>>  		dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
>>  		goto err_del_rtc_irqc;
>> @@ -320,7 +451,8 @@ err_del_rtc_irqc:
>>  err_del_irqc:
>>  	regmap_del_irq_chip(max77686->irq, max77686->irq_data);
>>  err_unregister_i2c:
>> -	i2c_unregister_device(max77686->rtc);
>> +	if (max77686->type == TYPE_MAX77686)
>> +		i2c_unregister_device(max77686->rtc);
>>  
>>  	return ret;
>>  }
>> @@ -341,6 +473,7 @@ static int max77686_i2c_remove(struct i2c_client *i2c)
> 
> In remove() you should unregister dummy RTC I2C device only on MAX77686
> (77802 does not add it).
>

Yes, I added the check to the probe()'s error path but forgot about the remove()
function. Thanks a lot for pointing this out.

> Best regards,
> Krzysztof
> 
> 

Best regards,
Javier

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux