On Fri, May 30, 2014 at 09:54:37PM +0200, Arnd Bergmann wrote:
> On Friday 30 May 2014 22:29:13 Hiroshi Doyu wrote:
> >
> > IIUC the original problem, "a master with 8 streamIDs" means something
> > like below, where some devices have multiple IDs but some have a
> > single. A sinle #address-cells cannot afford those 2 masters at once.
> >
> > iommu {
> > /* the specifier represents the ID of the master */
> > #address-cells = <1>;
> > #size-cells = <0>;
> > };
> >
> > master@a {
> > ...
> > iommus = <&smmu 1 2 3>; # 3 IDs
> > };
> >
> > master@b {
> > ...
> > iommus = <&smmu 4>; # 1 ID
> > };
>
> This would not be the usual format really. It should instead be
>
> iommus = <&smmu 1>, <&smmu 2>, <&smmu 3>;
>
> which can be tedious to type.
"Tedious to type" doesn't sound like a good argument to me. I don't see
why the above would necessarily be a bad notation. It's very much up to
the point and very explicit. This very obviously translates to:
This device has three master interfaces, one for smmu ID 1, one
for smmu ID 2 and one for smmu ID 3.
> > Tegra,SMMU has a similar problem and we have used a fixed size bitmap(64
> > bit) to afford 64 stream IDs so that a single device can hold multiple
> > IDs. If we apply the same bitmap to the above exmaple:
> >
> > iommu {
> > /* the specifier represents the ID of the master */
> > #address-cells = <1>;
> > #size-cells = <0>;
> > };
> >
> > master@a {
> > ...
> > iommus = <&smmu (BIT(1) | BIT(2) | BIT(3))>; # IDs 1 2 3
> > };
> >
> > master@b {
> > ...
> > iommus = <&smmu BIT(4)>; # ID 4
> > };
> >
> > The disadvantage of this is that this limits the max number of streamIDs
> > to support. If # of streamID is increased later more than 64, this
> > format cannot cover any more. You have to predict the max # of streamIDs
> > in advance if steamID is statically assigned.
> >
>
> Well, the iommu specific binding could allow a variable #address-cells.
> That way, you just need to know the number of stream IDs for that instance
> of the iommu.
That sounds fairly complicated to me. I don't see what that buys us over
the clarity and simplicity that the above explicit notation gives us. Is
it not more common for a device to have a single master rather than a
whole bunch of them?
Thierry
Attachment:
pgp4j74NpDMoh.pgp
Description: PGP signature
