Am Donnerstag, 15. Mai 2014, 11:18:44 schrieb Doug Anderson:
> Thomas,
>
> On Tue, May 13, 2014 at 6:11 PM, Thomas Abraham <ta.omasab@xxxxxxxxx> wrote:
> > From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> > +static int exynos4210_armclk_pre_rate_change(struct clk_notifier_data
> > *ndata, + struct exynos_cpuclk *armclk, void
> > __iomem *base) +{
> > + struct exynos4210_armclk_data *armclk_data = armclk->data;
> > + unsigned long alt_prate = clk_get_rate(armclk->alt_parent);
> > + unsigned long alt_div, div0, div1, tdiv0, mux_reg;
> > + unsigned long cur_armclk_rate, timeout;
> > + unsigned long flags;
> > +
> > + /* find out the divider values to use for clock data */
> > + while (armclk_data->prate != ndata->new_rate) {
> > + if (armclk_data->prate == 0)
> > + return -EINVAL;
> > + armclk_data++;
> > + }
> > +
> > + div0 = armclk_data->div0;
> > + div1 = armclk_data->div1;
> > + if (readl(base + SRC_CPU) & EXYNOS4210_MUX_HPM_MASK) {
> > + div1 = readl(base + DIV_CPU1) & EXYNOS4210_DIV1_HPM_MASK;
> > + div1 |= ((armclk_data->div1) & ~EXYNOS4210_DIV1_HPM_MASK);
> > + }
> > +
> > + /*
> > + * if the new and old parent clock speed is less than the clock
> > speed + * of the alternate parent, then it should be ensured that
> > at no point + * the armclk speed is more than the old_prate until
> > the dividers are + * set.
> > + */
> > + tdiv0 = readl(base + DIV_CPU0);
> > + cur_armclk_rate = ndata->old_rate / EXYNOS4210_ARM_DIV1(tdiv0) /
> > + EXYNOS4210_ARM_DIV2(tdiv0);
> > + if (alt_prate > cur_armclk_rate) {
> > + alt_div = _calc_div(alt_prate, cur_armclk_rate);
> > + _exynos4210_set_armclk_div(base, alt_div);
> > + div0 |= alt_div;
>
> Don't you need to up the voltage here, too? ...I haven't reviewed
> this whole patch (so perhaps it's elsewhere in the patch or in the
> series), but I stumbled upon this while trying to solve a different
> problem and figured I'd check...
setting the voltage should be done by the cpufreq driver like cpufreq-cpu0 -
whose usage this series intents to allow.
As I've hijacked Thomas' concept for my current rockchip clock work, I've
already seen this working nicely :-) .
Heiko
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
