Thomas,
On Tue, May 13, 2014 at 6:11 PM, Thomas Abraham <ta.omasab@xxxxxxxxx> wrote:
> From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> +static int exynos4210_armclk_pre_rate_change(struct clk_notifier_data *ndata,
> + struct exynos_cpuclk *armclk, void __iomem *base)
> +{
> + struct exynos4210_armclk_data *armclk_data = armclk->data;
> + unsigned long alt_prate = clk_get_rate(armclk->alt_parent);
> + unsigned long alt_div, div0, div1, tdiv0, mux_reg;
> + unsigned long cur_armclk_rate, timeout;
> + unsigned long flags;
> +
> + /* find out the divider values to use for clock data */
> + while (armclk_data->prate != ndata->new_rate) {
> + if (armclk_data->prate == 0)
> + return -EINVAL;
> + armclk_data++;
> + }
> +
> + div0 = armclk_data->div0;
> + div1 = armclk_data->div1;
> + if (readl(base + SRC_CPU) & EXYNOS4210_MUX_HPM_MASK) {
> + div1 = readl(base + DIV_CPU1) & EXYNOS4210_DIV1_HPM_MASK;
> + div1 |= ((armclk_data->div1) & ~EXYNOS4210_DIV1_HPM_MASK);
> + }
> +
> + /*
> + * if the new and old parent clock speed is less than the clock speed
> + * of the alternate parent, then it should be ensured that at no point
> + * the armclk speed is more than the old_prate until the dividers are
> + * set.
> + */
> + tdiv0 = readl(base + DIV_CPU0);
> + cur_armclk_rate = ndata->old_rate / EXYNOS4210_ARM_DIV1(tdiv0) /
> + EXYNOS4210_ARM_DIV2(tdiv0);
> + if (alt_prate > cur_armclk_rate) {
> + alt_div = _calc_div(alt_prate, cur_armclk_rate);
> + _exynos4210_set_armclk_div(base, alt_div);
> + div0 |= alt_div;
Don't you need to up the voltage here, too? ...I haven't reviewed
this whole patch (so perhaps it's elsewhere in the patch or in the
series), but I stumbled upon this while trying to solve a different
problem and figured I'd check...
-Doug
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
