Tomasz,
On Thu, May 8, 2014 at 2:04 AM, Tomasz Figa <tomasz.figa@xxxxxxxxx> wrote:
> Hi Ajay,
>
>
> On 07.05.2014 14:56, Ajay Kumar wrote:
>>
>> Add PWM backlight node for exynos5250 and enable the same on exynos5250
>> based snow board.
>>
>> Signed-off-by: Olof Johansson <olof@xxxxxxxxx>
>> Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
>> ---
>> arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 7 +++++++
>> arch/arm/boot/dts/exynos5250-snow.dts | 5 +++++
>> arch/arm/boot/dts/exynos5250.dtsi | 10 ++++++++++
>> 3 files changed, 22 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
>> b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
>> index 9a49e68..2a4680c 100644
>> --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
>> +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
>> @@ -351,6 +351,13 @@
>> samsung,pin-drv = <0>;
>> };
>>
>> + backlight_pwm: backlight-pwm {
>> + samsung,pins = "gpb2-0";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <0>;
>> + samsung,pin-drv = <0>;
>> + };
>
>
> This looks like a generic PWM output function, not specific to backlight in
> any way.
>
> Please see patch [1] adding PWM output pin groups for Exynos5420 for
> reference.
>
> [1]
> https://www.mail-archive.com/linux-samsung-soc@xxxxxxxxxxxxxxx/msg29869.html
Right! I just referred to the manual again, and it actually reads TOUT_0.
So, I should be probably renaming this as "pwm0_out" like in the other patch?
Ajay
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
