On 2 May 2014 07:55, Kukjin Kim <kgene.kim@xxxxxxxxxxx> wrote: > Heiko Stübner wrote: >> >> Hi Sachin, >> >> Am Donnerstag, 1. Mai 2014, 16:14:44 schrieb Sachin Kamat: >> > Instead of hardcoding the SYSRAM details for each SoC, >> > pass this information through device tree (DT) and make >> > the code SoC agnostic. Generic SRAM bindings are used >> > for achieving this. >> > >> > Signed-off-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx> >> > Cc: Heiko Stuebner <heiko@xxxxxxxxx> >> > Cc: Arnd Bergmann <arnd@xxxxxxxx> >> >> very cool :-). >> >> I've found one little thing I do not understand, which I describe below. >> Otherwise >> Acked-by: Heiko Stuebner <heiko@xxxxxxxxx> >> >> > --- >> > This patch is based on linux next (next-20140501) on top of >> > my Kconfig consolidation patch >> > http://comments.gmane.org/gmane.linux.kernel.samsung-soc/28642 >> > >> > Tested on 4210/4412 Origen, 5250/5420 Arndale and SMDK5420 boards. >> > --- >> > arch/arm/Kconfig | 1 + >> > arch/arm/boot/dts/exynos4210-universal_c210.dts | 17 ++++++ >> > arch/arm/boot/dts/exynos4210.dtsi | 18 +++++++ >> > arch/arm/boot/dts/exynos4x12.dtsi | 18 +++++++ >> > arch/arm/boot/dts/exynos5250.dtsi | 18 +++++++ >> > arch/arm/boot/dts/exynos5420.dtsi | 18 +++++++ >> > arch/arm/mach-exynos/common.h | 1 + >> > arch/arm/mach-exynos/exynos.c | 64 >> > ----------------------- arch/arm/mach-exynos/firmware.c > | >> > 5 +- >> > arch/arm/mach-exynos/include/mach/map.h | 7 --- >> > arch/arm/mach-exynos/platsmp.c | 39 +++++++++++++- >> > 11 files changed, 133 insertions(+), 73 deletions(-) >> > >> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig >> > index a6aaaad19b1a..f66ea9453df9 100644 >> > --- a/arch/arm/Kconfig >> > +++ b/arch/arm/Kconfig >> > @@ -855,6 +855,7 @@ config ARCH_EXYNOS >> > select S5P_DEV_MFC >> > select SAMSUNG_DMADEV >> > select SPARSE_IRQ >> > + select SRAM >> > select USE_OF >> > help >> > Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) >> > diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts >> > b/arch/arm/boot/dts/exynos4210-universal_c210.dts index >> > 63e34b24b04f..8d4de5c0d0c7 100644 >> > --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts >> > +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts >> > @@ -28,6 +28,23 @@ >> > bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw >> rootwait >> > earlyprintk panic=5 maxcpus=1"; }; >> > >> > + sram@02020000 { >> > + status = "disabled"; >> > + }; >> > + >> > + sram@02025000 { >> > + compatible = "mmio-sram"; >> > + reg = <0x02025000 0x1000>; >> > + #address-cells = <1>; >> > + #size-cells = <1>; >> > + ranges = <0 0x02025000 0x1000>; >> > + >> > + smp-sram@0 { >> > + compatible = "samsung,exynos4210-sram"; >> > + reg = <0x0 0x1000>; >> > + }; >> > + }; >> >> exynos_smp_prepare_sram returns -ENODEV if it can't find >> samsung,exynos4210-sram-ns, so are you sure your universal_c210 will run >> without it? I didn't dig to deep into this, so it can also simply be >> something >> I overlooked :-) >> > Hi Andrzej and Tomasz, > > Can you please check above? Please test v2 of this series. -- With warm regards, Sachin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |