Re: [RFC v3 PATCH v2 10/16] drm/exynos: dsi: add driver data to support Exynos5420

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sachin,

Thank you for comment.

I'll fix.

Thank you.
Best regards YJ

On 04/30/2014 12:26 AM, Sachin Kamat wrote:
On 27 April 2014 07:20, YoungJun Cho <yj44.cho@xxxxxxxxxxx> wrote:
The offset of register DSIM_PLLTMR_REG in Exynos5420 is different
from the one in Exynos4 SoC.

In case of Exynos5420 SoC, there is no frequency band bit in DSIM_PLLCTRL_REG,
and it uses DSIM_PHYCTRL_REG and DSIM_PHYTIMING*_REG instead.
So this patch adds driver data to distinguish it.

Changelog v2:
- Moves exynos_dsi_enable_clocks() after exynos_dsi_reset()
   (commented by Andrzej Hajda)
- Splits D-PHY control setting routines from PLL setting one
   (commented by Andrzej Hajda)

Signed-off-by: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
Acked-by: Inki Dae <inki.dae@xxxxxxxxxxx>
Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
  drivers/gpu/drm/exynos/exynos_drm_dsi.c |  154 ++++++++++++++++++++++++++-----
  1 file changed, 132 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 4a918ec..c18dba3 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -17,6 +17,7 @@

  #include <linux/clk.h>
  #include <linux/irq.h>
+#include <linux/of_device.h>
  #include <linux/phy/phy.h>
  #include <linux/regulator/consumer.h>

@@ -54,9 +55,12 @@

  /* FIFO memory AC characteristic register */
  #define DSIM_PLLCTRL_REG       0x4c    /* PLL control register */
-#define DSIM_PLLTMR_REG                0x50    /* PLL timer register */
  #define DSIM_PHYACCHR_REG      0x54    /* D-PHY AC characteristic register */
  #define DSIM_PHYACCHR1_REG     0x58    /* D-PHY AC characteristic register1 */
+#define DSIM_PHYCTRL_REG       0x5c
+#define DSIM_PHYTIMING_REG     0x64
+#define DSIM_PHYTIMING1_REG    0x68
+#define DSIM_PHYTIMING2_REG    0x6c

  /* DSIM_STATUS */
  #define DSIM_STOP_STATE_DAT(x)         (((x) & 0xf) << 0)
@@ -200,6 +204,21 @@
  #define DSIM_PLL_M(x)                  ((x) << 4)
  #define DSIM_PLL_S(x)                  ((x) << 1)

+/* DSIM_PHYTIMING */
+#define DSIM_PHYTIMING_LPX(x)          ((x) << 8)
+#define DSIM_PHYTIMING_HS_EXIT(x)      ((x) << 0)
+
+/* DSIM_PHYTIMING1 */
+#define DSIM_PHYTIMING1_CLK_PREPARE(x) ((x) << 24)
+#define DSIM_PHYTIMING1_CLK_ZERO(x)    ((x) << 16)
+#define DSIM_PHYTIMING1_CLK_POST(x)    ((x) << 8)
+#define DSIM_PHYTIMING1_CLK_TRAIL(x)   ((x) << 0)
+
+/* DSIM_PHYTIMING2 */
+#define DSIM_PHYTIMING2_HS_PREPARE(x)  ((x) << 16)
+#define DSIM_PHYTIMING2_HS_ZERO(x)     ((x) << 8)
+#define DSIM_PHYTIMING2_HS_TRAIL(x)    ((x) << 0)
+
  #define DSI_MAX_BUS_WIDTH              4
  #define DSI_NUM_VIRTUAL_CHANNELS       4
  #define DSI_TX_FIFO_SIZE               2048
@@ -233,6 +252,12 @@ struct exynos_dsi_transfer {
  #define DSIM_STATE_INITIALIZED         BIT(1)
  #define DSIM_STATE_CMD_LPM             BIT(2)

+struct exynos_dsi_driver_data {

Shouldn't this be static?

+       unsigned int plltmr_reg;
+

nit: stray blank line

+       unsigned int has_freqband:1;
+};
+

<snip>

+static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
+{
+       struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
+       u32 reg;
+
+       if (driver_data->has_freqband)
+               return;
+
+       /* B D-PHY */
+       reg = 0x0af & 0x1ff;

Please use macros instead of magic numbers.


--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux