On 27 April 2014 07:20, YoungJun Cho <yj44.cho@xxxxxxxxxxx> wrote:
> The offset of register DSIM_PLLTMR_REG in Exynos5420 is different
> from the one in Exynos4 SoC.
>
> In case of Exynos5420 SoC, there is no frequency band bit in DSIM_PLLCTRL_REG,
> and it uses DSIM_PHYCTRL_REG and DSIM_PHYTIMING*_REG instead.
> So this patch adds driver data to distinguish it.
>
> Changelog v2:
> - Moves exynos_dsi_enable_clocks() after exynos_dsi_reset()
> (commented by Andrzej Hajda)
> - Splits D-PHY control setting routines from PLL setting one
> (commented by Andrzej Hajda)
>
> Signed-off-by: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
> Acked-by: Inki Dae <inki.dae@xxxxxxxxxxx>
> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
> drivers/gpu/drm/exynos/exynos_drm_dsi.c | 154 ++++++++++++++++++++++++++-----
> 1 file changed, 132 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> index 4a918ec..c18dba3 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> @@ -17,6 +17,7 @@
>
> #include <linux/clk.h>
> #include <linux/irq.h>
> +#include <linux/of_device.h>
> #include <linux/phy/phy.h>
> #include <linux/regulator/consumer.h>
>
> @@ -54,9 +55,12 @@
>
> /* FIFO memory AC characteristic register */
> #define DSIM_PLLCTRL_REG 0x4c /* PLL control register */
> -#define DSIM_PLLTMR_REG 0x50 /* PLL timer register */
> #define DSIM_PHYACCHR_REG 0x54 /* D-PHY AC characteristic register */
> #define DSIM_PHYACCHR1_REG 0x58 /* D-PHY AC characteristic register1 */
> +#define DSIM_PHYCTRL_REG 0x5c
> +#define DSIM_PHYTIMING_REG 0x64
> +#define DSIM_PHYTIMING1_REG 0x68
> +#define DSIM_PHYTIMING2_REG 0x6c
>
> /* DSIM_STATUS */
> #define DSIM_STOP_STATE_DAT(x) (((x) & 0xf) << 0)
> @@ -200,6 +204,21 @@
> #define DSIM_PLL_M(x) ((x) << 4)
> #define DSIM_PLL_S(x) ((x) << 1)
>
> +/* DSIM_PHYTIMING */
> +#define DSIM_PHYTIMING_LPX(x) ((x) << 8)
> +#define DSIM_PHYTIMING_HS_EXIT(x) ((x) << 0)
> +
> +/* DSIM_PHYTIMING1 */
> +#define DSIM_PHYTIMING1_CLK_PREPARE(x) ((x) << 24)
> +#define DSIM_PHYTIMING1_CLK_ZERO(x) ((x) << 16)
> +#define DSIM_PHYTIMING1_CLK_POST(x) ((x) << 8)
> +#define DSIM_PHYTIMING1_CLK_TRAIL(x) ((x) << 0)
> +
> +/* DSIM_PHYTIMING2 */
> +#define DSIM_PHYTIMING2_HS_PREPARE(x) ((x) << 16)
> +#define DSIM_PHYTIMING2_HS_ZERO(x) ((x) << 8)
> +#define DSIM_PHYTIMING2_HS_TRAIL(x) ((x) << 0)
> +
> #define DSI_MAX_BUS_WIDTH 4
> #define DSI_NUM_VIRTUAL_CHANNELS 4
> #define DSI_TX_FIFO_SIZE 2048
> @@ -233,6 +252,12 @@ struct exynos_dsi_transfer {
> #define DSIM_STATE_INITIALIZED BIT(1)
> #define DSIM_STATE_CMD_LPM BIT(2)
>
> +struct exynos_dsi_driver_data {
Shouldn't this be static?
> + unsigned int plltmr_reg;
> +
nit: stray blank line
> + unsigned int has_freqband:1;
> +};
> +
<snip>
> +static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
> +{
> + struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
> + u32 reg;
> +
> + if (driver_data->has_freqband)
> + return;
> +
> + /* B D-PHY */
> + reg = 0x0af & 0x1ff;
Please use macros instead of magic numbers.
--
With warm regards,
Sachin
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
