[RFC PATCH v2 09/21] panel/simple: add video interface DT bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The bindings allow to create explicit link between devices
providing video signal and the panel.

Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/panel/simple-panel.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/panel/simple-panel.txt b/Documentation/devicetree/bindings/panel/simple-panel.txt
index 1341bbf..4b1612e 100644
--- a/Documentation/devicetree/bindings/panel/simple-panel.txt
+++ b/Documentation/devicetree/bindings/panel/simple-panel.txt
@@ -8,6 +8,12 @@ Optional properties:
 - enable-gpios: GPIO pin to enable or disable the panel
 - backlight: phandle of the backlight device attached to the panel
 
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [1]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
 Example:
 
 	panel: panel {
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux