Re: [PATCH v2] ARM: dts: Add regulator entries to Exynos5420 SMDK board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21 December 2013 02:40, Tomasz Figa <tomasz.figa@xxxxxxxxx> wrote:
> On Thursday 19 of December 2013 10:05:52 Sachin Kamat wrote:
>> Hi Tomasz,
>>
>> On 18 December 2013 20:46, Tomasz Figa <t.figa@xxxxxxxxxxx> wrote:
>> > Hi Sachin,
>> >
>> > On Thursday 05 of December 2013 15:14:24 Sachin Kamat wrote:
>> >> Added regulator entries to Exynos5420 SMDK board.
>> >>
>> >> Signed-off-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
>> >> ---
>> >> Changes since v1:
>> >> Changed node name
>> >> ---
>> >>  arch/arm/boot/dts/exynos5420-smdk5420.dts |  216 +++++++++++++++++++++++++++++
>> >>  1 file changed, 216 insertions(+)
>> >>
>> >> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> >> index fb5a1e25c632..62e1ebe4e989 100644
>> >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> >> @@ -120,4 +120,220 @@
>> >>                       reg = <0x50>;
>> >>               };
>> >>       };
>> >> +
>> >> +     hsi2c_4: i2c@12CA0000 {
>> >> +             status = "okay";
>> >> +
>> >> +             s2mps11_pmic@66 {
>> >
>> > Just pmic@66 is enough.
>>
>> Please see my comment below.
>>
>> >
>> >> +                     compatible = "samsung,s2mps11-pmic";
>> >> +                     reg = <0x66>;
>> >> +                     s2mps11,buck2-ramp-delay = <12>;
>> >> +                     s2mps11,buck34-ramp-delay = <12>;
>> >> +                     s2mps11,buck16-ramp-delay = <12>;
>> >> +                     s2mps11,buck6-ramp-enable = <1>;
>> >> +                     s2mps11,buck2-ramp-enable = <1>;
>> >> +                     s2mps11,buck3-ramp-enable = <1>;
>> >> +                     s2mps11,buck4-ramp-enable = <1>;
>> >> +
>> >> +                     s2mps11_osc: clocks {
>> >> +                             #clock-cells = <1>;
>> >> +                             clock-output-names = "s2mps11_ap",
>> >> +                                             "s2mps11_cp", "s2mps11_bt";
>> >> +                     };
>> >> +
>> >> +                     regulators {
>> >> +                             ldo1_reg: LDO1 {
>> >> +                                     regulator-name = "vdd_ldo1";
>> >
>> > Is this the name as written on the PCB or board schematics?
>> > + the same for all regulators below.
>>
>> Yes, the schematic refers to these just as above (with no specific names).
>> Unless you have strong objections or a re-spin of this patch becomes
>> necessary, I
>> wouldn't want to change the name you pointed above. :)
>
> OK.
>
> Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx>

Ping Kukjin.



-- 
With warm regards,
Sachin
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux