Re: [PATCH v2] ARM: dts: Add regulator entries to Exynos5420 SMDK board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tomasz,

On 18 December 2013 20:46, Tomasz Figa <t.figa@xxxxxxxxxxx> wrote:
> Hi Sachin,
>
> On Thursday 05 of December 2013 15:14:24 Sachin Kamat wrote:
>> Added regulator entries to Exynos5420 SMDK board.
>>
>> Signed-off-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
>> ---
>> Changes since v1:
>> Changed node name
>> ---
>>  arch/arm/boot/dts/exynos5420-smdk5420.dts |  216 +++++++++++++++++++++++++++++
>>  1 file changed, 216 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> index fb5a1e25c632..62e1ebe4e989 100644
>> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> @@ -120,4 +120,220 @@
>>                       reg = <0x50>;
>>               };
>>       };
>> +
>> +     hsi2c_4: i2c@12CA0000 {
>> +             status = "okay";
>> +
>> +             s2mps11_pmic@66 {
>
> Just pmic@66 is enough.

Please see my comment below.

>
>> +                     compatible = "samsung,s2mps11-pmic";
>> +                     reg = <0x66>;
>> +                     s2mps11,buck2-ramp-delay = <12>;
>> +                     s2mps11,buck34-ramp-delay = <12>;
>> +                     s2mps11,buck16-ramp-delay = <12>;
>> +                     s2mps11,buck6-ramp-enable = <1>;
>> +                     s2mps11,buck2-ramp-enable = <1>;
>> +                     s2mps11,buck3-ramp-enable = <1>;
>> +                     s2mps11,buck4-ramp-enable = <1>;
>> +
>> +                     s2mps11_osc: clocks {
>> +                             #clock-cells = <1>;
>> +                             clock-output-names = "s2mps11_ap",
>> +                                             "s2mps11_cp", "s2mps11_bt";
>> +                     };
>> +
>> +                     regulators {
>> +                             ldo1_reg: LDO1 {
>> +                                     regulator-name = "vdd_ldo1";
>
> Is this the name as written on the PCB or board schematics?
> + the same for all regulators below.

Yes, the schematic refers to these just as above (with no specific names).
Unless you have strong objections or a re-spin of this patch becomes
necessary, I
wouldn't want to change the name you pointed above. :)

-- 
With warm regards,
Sachin
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux