Re: [PATCH v11 3/4] thermal: samsung: Add TMU support for Exynos5420 SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Tomasz,


On 18 December 2013 21:20, Tomasz Figa <t.figa@xxxxxxxxxxx> wrote:
> Hi Naveen,
>
> On Tuesday 10 of December 2013 12:12:25 Naveen Krishna Chatradhi wrote:
>> Exynos5420 has 5 TMU channels, the TRIMINFO register is
>> misplaced for TMU channels 2, 3 and 4
>> TRIMINFO at 0x1006c000 contains data for TMU channel 3
>> TRIMINFO at 0x100a0000 contains data for TMU channel 4
>> TRIMINFO at 0x10068000 contains data for TMU channel 2
> [snip]
>> diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
>> index a1aa602..a3e78c0 100644
>> --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
>> +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
>> @@ -6,6 +6,9 @@
>>              "samsung,exynos4412-tmu"
>>              "samsung,exynos4210-tmu"
>>              "samsung,exynos5250-tmu"
>> +            "samsung,exynos5420-tmu" for TMU channel 0, 1 on Exynos5420
>> +            "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4
>> +                     Exynos5420 (Must pass triminfo base and triminfo clock)
>
> Exact clock names must be specified in description of clock-names property.
Sure, will add them.
>
>>              "samsung,exynos5440-tmu"
>>  - interrupt-parent : The phandle for the interrupt controller
>>  - reg : Address range of the thermal registers. For soc's which has multiple
>> @@ -13,6 +16,16 @@
>>       interrupt related then 2 set of register has to supplied. First set
>>       belongs to register set of TMU instance and second set belongs to
>>       registers shared with the TMU instance.
>> +
>> +  NOTE: On Exynos5420, the TRIMINFO register is misplaced for TMU
>> +     channels 2, 3 and 4
>> +     Use "samsung,exynos5420-tmu-ext-triminfo" in cases, there is a misplaced
>> +     register, also provide clock to access that base.
>> +
>> +     TRIMINFO at 0x1006c000 contains data for TMU channel 3
>> +     TRIMINFO at 0x100a0000 contains data for TMU channel 4
>> +     TRIMINFO at 0x10068000 contains data for TMU channel 2
>> +
>>  - interrupts : Should contain interrupt for thermal system
>>  - clocks : The main clock for TMU device
>>  - clock-names : Thermal system clock name
>> @@ -43,6 +56,31 @@ Example 2):
>>               clock-names = "tmu_apbif";
>>       };
>>
>> +Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
>> +     tmu_cpu2: tmu@10068000 {
>> +             compatible = "samsung,exynos5420-tmu-ext-triminfo";
>> +             reg = <0x10068000 0x100>, <0x1006c000 0x4>;
>> +             interrupts = <0 184 0>;
>> +             clocks = <&clock 318>, <&clock 318>;
>> +             clock-names = "tmu_apbif", "tmu_triminfo_apbif";
>
> Here you have "tmu_triminfo_apbif" clock, but in the driver you call
> clk_get() with "tmu_apbif_triminfo".
My bad, will correct this
>
>> +     };
>> +
> [snip]
>>
>> +     data->clk_sec = devm_clk_get(&pdev->dev, "tmu_apbif_triminfo");
>
> Here you try to get "tmu_apbif_triminfo" clock, but in binding
> documentation you have "tmu_triminfo_apbif" in example.
My bad, will correct this
>
>> +     if (IS_ERR(data->clk_sec)) {
>> +             if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) {
>> +                     dev_err(&pdev->dev, "Failed to get triminfo clock\n");
>> +                     return PTR_ERR(data->clk_sec);
>> +             }
>> +     } else {
>> +             ret = clk_prepare(data->clk_sec);
>> +             if (ret) {
>> +                     dev_err(&pdev->dev, "Failed to get clock\n");
>> +                     return ret;
>> +             }
>> +     }
>> +
>>       ret = clk_prepare(data->clk);
>> -     if (ret)
>> -             return ret;
>> +     if (ret) {
>> +             dev_err(&pdev->dev, "Failed to get clock\n");
>> +             goto err_clk_sec;
>> +     }
>>
>>       if (pdata->type == SOC_ARCH_EXYNOS4210 ||
>>           pdata->type == SOC_ARCH_EXYNOS4412 ||
>>           pdata->type == SOC_ARCH_EXYNOS5250 ||
>> +         pdata->type == SOC_ARCH_EXYNOS5420_TRIMINFO ||
TMU channel 0, 1 on Exynos5420 does not require a new pdata->type.
The are exactly similar to Exynos5250. Only the channels 2, 3 and 4
have the triminfo register misplaced.

Hence, just SOC_ARCH_EXYNOS5420_TRIMINFO should be enough

>
> Don't you also need SOC_ARCH_EXYNOS5420 here?
>
>>           pdata->type == SOC_ARCH_EXYNOS5440)
>>               data->soc = pdata->type;
>>       else {
>> @@ -703,6 +742,9 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>>       return 0;
>>  err_clk:
>>       clk_unprepare(data->clk);
>> +err_clk_sec:
>> +     if (!IS_ERR(data->clk_sec))
>> +             clk_unprepare(data->clk_sec);
>>       return ret;
>>  }
>>
>> @@ -715,6 +757,8 @@ static int exynos_tmu_remove(struct platform_device *pdev)
>>       exynos_unregister_thermal(data->reg_conf);
>>
>>       clk_unprepare(data->clk);
>> +     if (!IS_ERR(data->clk_sec))
>> +             clk_unprepare(data->clk_sec);
>>
>>       if (!IS_ERR(data->regulator))
>>               regulator_disable(data->regulator);
>> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
>> index 0d6b32f..60cce28 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.h
>> +++ b/drivers/thermal/samsung/exynos_tmu.h
>> @@ -43,6 +43,7 @@ enum soc_type {
>>       SOC_ARCH_EXYNOS4210 = 1,
>>       SOC_ARCH_EXYNOS4412,
>>       SOC_ARCH_EXYNOS5250,
>> +     SOC_ARCH_EXYNOS5420_TRIMINFO,
>
> Here as well.
>
>>       SOC_ARCH_EXYNOS5440,
>>  };
>>
> [snip]
>> +#define EXYNOS5420_TMU_DATA \
>> +     __EXYNOS5420_TMU_DATA \
>> +     .type = SOC_ARCH_EXYNOS5250, \
>> +     .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
>> +                     TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
>> +                     TMU_SUPPORT_EMUL_TIME)
>> +
>> +#define EXYNOS5420_TMU_DATA_SHARED \
>> +     __EXYNOS5420_TMU_DATA \
>> +     .type = SOC_ARCH_EXYNOS5420_TRIMINFO, \
>> +     .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
>> +                     TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
>> +                     TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE)
>> +
>> +struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
>> +     .tmu_data = {
>> +             { EXYNOS5420_TMU_DATA },
>> +             { EXYNOS5420_TMU_DATA },
>> +             { EXYNOS5420_TMU_DATA_SHARED },
>> +             { EXYNOS5420_TMU_DATA_SHARED },
>> +             { EXYNOS5420_TMU_DATA_SHARED },
>
> Shouldn't this be inferred from compatible string?
>
> If I understand this code correctly, you can now always use
> EXYNOS5420_TMU_DATA for 5420-tmu compatible string and
> EXYNOS5420_TMU_DATA_SHARED for 5420-tmu-ext-triminfo.

Correct,
To avoid changes to exynos_get_driver_data() function the
exynos_get_driver_data struct is defined as above.

As function exynos_get_driver_data(struct platform_device *pdev, int id)
uses the id and matches the approriate structure pointer.

>
> Best regards,
> Tomasz
Thanks for your comments, will respin.
>



-- 
Shine bright,
(: Nav :)
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux