Hi Tomasz, On Wed, Dec 11, 2013 at 5:54 PM, Tomasz Figa <t.figa@xxxxxxxxxxx> wrote: > Hi Abhilash, > > On Wednesday 11 of December 2013 17:27:07 Abhilash Kesavan wrote: >> Following messages are observed when unused PMIC clocks are being >> disabled during boot-up: >> [ 2921.969560] BUG: scheduling while atomic: swapper/0/1/0x00000002 >> [ 2921.974080] Modules linked in: >> [ 2921.977120] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc1-00018-g8465d57 #27 >> [ 2921.984772] [<c0013c80>] (unwind_backtrace+0x0/0xf8) from [<c00110cc>] (show_stack+0x10/0x14) >> [ 2921.993269] [<c00110cc>] (show_stack+0x10/0x14) from [<c032c10c>] (dump_stack+0x64/0xa4) >> [ 2922.001340] [<c032c10c>] (dump_stack+0x64/0xa4) from [<c0329b00>] (__schedule_bug+0x48/0x60) >> [ 2922.009758] [<c0329b00>] (__schedule_bug+0x48/0x60) from [<c032d414>] (__schedule+0x468/0x504) >> [ 2922.018351] [<c032d414>] (__schedule+0x468/0x504) from [<c032caac>] (schedule_timeout+0x114/0x19c) >> [ 2922.027294] [<c032caac>] (schedule_timeout+0x114/0x19c) from [<c0255c00>] (s3c24xx_i2c_xfer+0x1cc/0x320) >> [ 2922.036754] [<c0255c00>] (s3c24xx_i2c_xfer+0x1cc/0x320) from [<c0252e08>] (__i2c_transfer+0x44/0x7c) >> [ 2922.045868] [<c0252e08>] (__i2c_transfer+0x44/0x7c) from [<c025416c>] (i2c_transfer+0x74/0x98) >> [ 2922.054462] [<c025416c>] (i2c_transfer+0x74/0x98) from [<c021ed38>] (regmap_i2c_read+0x48/0x64) >> [ 2922.063142] [<c021ed38>] (regmap_i2c_read+0x48/0x64) from [<c021b41c>] (_regmap_raw_read+0xa8/0xfc) >> [ 2922.072168] [<c021b41c>] (_regmap_raw_read+0xa8/0xfc) from [<c021b780>] (_regmap_bus_read+0x28/0x48) >> [ 2922.081281] [<c021b780>] (_regmap_bus_read+0x28/0x48) from [<c0219d30>] (_regmap_read+0x5c/0xc4) >> [ 2922.090048] [<c0219d30>] (_regmap_read+0x5c/0xc4) from [<c0219ddc>] (regmap_read+0x44/0x5c) >> [ 2922.098383] [<c0219ddc>] (regmap_read+0x44/0x5c) from [<c0290bdc>] (max77686_clk_is_enabled+0x20/0x3c) >> [ 2922.107670] [<c0290bdc>] (max77686_clk_is_enabled+0x20/0x3c) from [<c028cfdc>] (clk_disable_unused_subtree+0x6c/0xa8) >> [ 2922.118258] [<c028cfdc>] (clk_disable_unused_subtree+0x6c/0xa8) from [<c028dc90>] (clk_disable_unused+0x30/0xd8) >> [ 2922.128414] [<c028dc90>] (clk_disable_unused+0x30/0xd8) from [<c00087a8>] (do_one_initcall+0x38/0x160) >> >> Fix it by replacing is_enabled call-back with is_prepared as the i2c driver may >> sleep during a transfer. >> >> Signed-off-by: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx> >> --- >> drivers/clk/clk-max77686.c | 4 ++-- >> 1 file changed, 2 insertions(+), 2 deletions(-) > > This has been already fixed as a part of series I sent a while ago to > fix max77686 clock driver. Unfortunately nobody seems to have applied > it. > > Please refer to following thread: > http://thread.gmane.org/gmane.linux.kernel.samsung-soc/24153 > > I plan to rebase and resent the series soon. Great, your patchset also adds OF support which was what I was looking to do next. I'll wait for the rebased patchset. > > Best regards, > Tomasz Thanks, Abhilash -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |