Hi, > From: Kishon Vijay Abraham I [mailto:kishon@xxxxxx] > Sent: Thursday, December 05, 2013 4:07 PM > > Hi, > > On Thursday 05 December 2013 05:59 PM, Kamil Debski wrote: > > Hi, > > > > This is the fourth version of the patchset adding the new Exynos USB > > 2.0 PHY driver. The driver uses the Generic PHY Framework. > > > > A month has passed since the last version. I have addressed numerous > > comments that appeared on the mailing list in this patch. I would > like > > to specially thank Kishon, Tomasz, Matt and Vivek for their comments. > > > > This patch contains two necessary patches to the phy core. > > It is very useful to be able to get phy using a device tree node. > > > > In addition this patch depends on: > > [PATCH V11 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and > > exynos5420 dtsi files [1]. > > > > Best wishes, > > Kamil Debski > > The last four patches are missing [1] I am sorry, git send-email failed on the 6th patch thus that and the Following patches were not sent. I guess it is the Murphy's law, sending patches just before leaving office had high chances of such a mishap. Best wishes, -- Kamil Debski Samsung R&D Institute Poland > [1] -> https://lkml.org/lkml/2013/12/5/166 > > Thanks > Kishon > > > > [1] - http://www.spinics.net/lists/linux-samsung-soc/msg24528.html > > > > ---------------- > > Changes from v3: > > - using PMU and system registers indirectly via syscon > > - change labelling > > - change Kconfig name > > - fixed typos/stray whitespace > > - move of_phy_provider_register() to the end of probe > > - add a regular error return code to the rate_to_clk functions > > - cleanup code and remove unused code > > - change struct names to avoid collisions > > - add mechanism to support multiple phys by the ehci driver > > > > ---------------- > > Changes from v2: > > - rebase all patches to the usb-next branch > > - fixes in the documentation file > > - remove wrong entries in the phy node (ranges, and #address- & > #size-cells) > > - add clocks and clock-names as required properites > > - rephrase a few sentences > > - fixes in the ehci-exynos.c file > > - move phy_name variable next to phy in exynos_ehci_hcd > > - remove otg from exynos_ehci_hcd as it was no longer used > > - move devm_phy_get after the Exynos5440 skip_phy check > > - fixes in the s3c-hsotg.c file > > - cosmetic fixes (remove empty line that was wrongfully added) > > - fixes in the main driver > > - remove cpu_type in favour for a boolean flag matched with the > compatible > > value > > - rename files, structures, variables and Kconfig entires - change > from simple > > "uphy" to "usb2_phy" > > - fix multiline comments style > > - simplify #ifdefs in of_device_id > > - fix Kconfig description > > - change dev_info to dev_dbg where reasonable > > - cosmetic changes (remove wrongful blank lines) > > - remove unnecessary reference counting > > > > ---------------- > > Changes from v1: > > - the changes include minor fixes of the hardware initialization of > the PHY > > module > > - some other minor fixes were introduced > > > > ---------------------- > > Original cover letter: > > > > Hi, > > > > This patch adds a new drive for USB PHYs for Samsung SoCs. The driver > > is using the Generic PHY Framework created by Kishon Vijay Abrahan I. > > It can be found here https://lkml.org/lkml/2013/8/21/29. This patch > > adds support to Exynos4 family of SoCs. Support for Exynos3 and > > Exynos5 is planned to be added in the near future. > > > > I welcome your comments. > > > > ---------------------- > > > > [1] https://lkml.org/lkml/2013/8/21/29 > > > > > > Kamil Debski (8): > > phy: core: Change the way of_phy_get is called > > phy: core: Add devm_of_phy_get to phy-core > > phy: Add new Exynos USB PHY driver > > usb: ehci-s5p: Change to use phy provided by the generic phy > > framework > > usb: s3c-hsotg: Use the new Exynos USB phy driver with the generic > > phy framework > > phy: Add Exynos 5250 support to the Exynos USB 2.0 PHY driver > > dts: Add usb2phy to Exynos 4 > > dts: Add usb2phy to Exynos 5250 > > > > Mateusz Krawczuk (1): > > phy: Add support for S5PV210 to the Exynos USB PHY driver > > > > .../devicetree/bindings/arm/samsung/pmu.txt | 2 + > > .../devicetree/bindings/phy/samsung-usbphy.txt | 56 +++ > > .../devicetree/bindings/usb/samsung-hsotg.txt | 4 + > > Documentation/devicetree/bindings/usb/usb-ehci.txt | 35 ++ > > arch/arm/boot/dts/exynos4.dtsi | 31 ++ > > arch/arm/boot/dts/exynos4210.dtsi | 17 + > > arch/arm/boot/dts/exynos4x12.dtsi | 17 + > > arch/arm/boot/dts/exynos5250.dtsi | 33 +- > > drivers/phy/Kconfig | 35 ++ > > drivers/phy/Makefile | 5 + > > drivers/phy/phy-core.c | 43 ++- > > drivers/phy/phy-exynos4210-usb2.c | 264 > ++++++++++++++ > > drivers/phy/phy-exynos4212-usb2.c | 312 > +++++++++++++++++ > > drivers/phy/phy-exynos5250-usb2.c | 363 > ++++++++++++++++++++ > > drivers/phy/phy-s5pv210-usb2.c | 206 > +++++++++++ > > drivers/phy/phy-samsung-usb2.c | 240 > +++++++++++++ > > drivers/phy/phy-samsung-usb2.h | 74 ++++ > > drivers/usb/gadget/s3c-hsotg.c | 11 +- > > drivers/usb/host/ehci-exynos.c | 95 +++-- > > include/linux/phy/phy.h | 3 + > > 20 files changed, 1789 insertions(+), 57 deletions(-) create mode > > 100644 Documentation/devicetree/bindings/phy/samsung-usbphy.txt > > create mode 100644 drivers/phy/phy-exynos4210-usb2.c create mode > > 100644 drivers/phy/phy-exynos4212-usb2.c create mode 100644 > > drivers/phy/phy-exynos5250-usb2.c create mode 100644 > > drivers/phy/phy-s5pv210-usb2.c create mode 100644 > > drivers/phy/phy-samsung-usb2.c create mode 100644 > > drivers/phy/phy-samsung-usb2.h > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |