On Wed, Dec 04, 2013 at 11:17:43PM +0000, Sylwester Nawrocki wrote: > On 10/31/2013 04:29 PM, Andrzej Hajda wrote: > > Driver for Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor > > with embedded SoC ISP. > > The driver exposes the sensor as two V4L2 subdevices: > > - S5K5BAF-CIS - pure CMOS Image Sensor, fixed 1600x1200 format, > > no controls. > > - S5K5BAF-ISP - Image Signal Processor, formats up to 1600x1200, > > pre/post ISP cropping, downscaling via selection API, controls. > > > > Signed-off-by: Sylwester Nawrocki<s.nawrocki@xxxxxxxxxxx> > > Signed-off-by: Andrzej Hajda<a.hajda@xxxxxxxxxxx> > > Signed-off-by: Kyungmin Park<kyungmin.park@xxxxxxxxxxx> > > --- > > Hi, > > > > This is the 9th iteration of the patch. > > In this iteration 'binary' blobs from source > > file have been moved to separate firmware file. > > Firmware file will be uploaded to appropriate > > repository. > [...] > > v9 > > - patch, ccm and cis configuration blobs moved to > > firmware set files, > > - minor improvements of bindings, > > - cosmetic changes > > Hi Mark, Hi Sylwester, > > What do you think about this DT binding now, could we have your Ack ? Other than a minor nit below, the binding looks fine to me. With the fixed, for the binding: Acked-by: Mark Rutland <mark.rutland@xxxxxxx> > I think we still need to move the DT binding into a separate patch. If you're going to post the patch again, then please do split the binding into a separate patch. [...] > > diff --git a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt > > new file mode 100644 > > index 0000000..23ebe0f > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt > > @@ -0,0 +1,57 @@ > > +Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP > > +-------------------------------------------------------------------- > > + > > +Required properties: > > + > > +- compatible : "samsung,s5k5baf"; > > +- reg : I2C slave address of the sensor; > > +- vdda-supply : analog power supply 2.8V (2.6V to 3.0V); > > +- vddreg-supply : regulator input power supply 1.8V (1.7V to 1.9V) > > + or 2.8V (2.6V to 3.0); > > +- vddio-supply : I/O power supply 1.8V (1.65V to 1.95V) > > + or 2.8V (2.5V to 3.1V); > > +- stbyn-gpios : GPIO connected to STDBYN pin; > > +- rstn-gpios : GPIO connected to RSTN pin; > > +- clocks : clock-specifiers (per the common clock bindings) for the > > + clocks described in clock-names; Clocks are referred to by phandle + clock-specifier pairs rather than just clock-specifiers, it would be nice to fix up the terminology here. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |