This converts the mentioned platforms to use the newly introduced driver
for the common clock framework for them.
With this the whole legacy clock structure can go away too.
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
arch/arm/boot/dts/s3c2416-smdk2416.dts | 9 +
arch/arm/boot/dts/s3c2416.dtsi | 48 +++
arch/arm/mach-s3c24xx/Kconfig | 14 +-
arch/arm/mach-s3c24xx/Makefile | 5 +-
arch/arm/mach-s3c24xx/clock-s3c2416.c | 171 --------
arch/arm/mach-s3c24xx/clock-s3c2443.c | 212 ----------
arch/arm/mach-s3c24xx/common-s3c2443.c | 675 -------------------------------
arch/arm/mach-s3c24xx/common.c | 16 +-
arch/arm/mach-s3c24xx/common.h | 6 +
arch/arm/mach-s3c24xx/mach-s3c2416-dt.c | 39 +-
arch/arm/mach-s3c24xx/mach-smdk2416.c | 9 +-
arch/arm/mach-s3c24xx/mach-smdk2443.c | 9 +-
12 files changed, 98 insertions(+), 1115 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2416.c
delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2443.c
delete mode 100644 arch/arm/mach-s3c24xx/common-s3c2443.c
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index 59594cf..fefb699 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -19,6 +19,15 @@
reg = <0x30000000 0x4000000>;
};
+ clocks {
+ xti: xti {
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ clock-output-names = "xti";
+ #clock-cells = <0>;
+ };
+ };
+
serial@50000000 {
status = "okay";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index e6555bd..4bde5a2 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -8,6 +8,7 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/clock/samsung,s3c2443-clock.h>
#include "s3c24xx.dtsi"
#include "s3c2416-pinctrl.dtsi"
@@ -28,26 +29,59 @@
compatible = "samsung,s3c2416-irq";
};
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks: clock-controller@0x4c000000 {
+ compatible = "samsung,s3c2416-clock";
+ reg = <0x4c000000 0x40>;
+ #clock-cells = <1>;
+ };
+ };
+
pinctrl@56000000 {
compatible = "samsung,s3c2416-pinctrl";
};
+ timer@51000000 {
+ clocks = <&clocks PCLK_PWM>;
+ clock-names = "timers";
+ };
+
serial@50000000 {
compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+ <&clocks SCLK_UART>;
};
serial@50004000 {
compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+ <&clocks SCLK_UART>;
};
serial@50008000 {
compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+ <&clocks SCLK_UART>;
};
serial@5000C000 {
compatible = "samsung,s3c2440-uart";
reg = <0x5000C000 0x4000>;
interrupts = <1 18 24 4>, <1 18 25 4>;
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
+ <&clocks SCLK_UART>;
status = "disabled";
};
@@ -55,6 +89,10 @@
compatible = "samsung,s3c6410-sdhci";
reg = <0x4AC00000 0x100>;
interrupts = <0 0 21 3>;
+ clock-names = "hsmmc", "mmc_busclk.0",
+ "mmc_busclk.2";
+ clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
+ <&clocks MUX_HSMMC0>;
status = "disabled";
};
@@ -62,18 +100,28 @@
compatible = "samsung,s3c6410-sdhci";
reg = <0x4A800000 0x100>;
interrupts = <0 0 20 3>;
+ clock-names = "hsmmc", "mmc_busclk.0",
+ "mmc_busclk.2";
+ clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
+ <&clocks MUX_HSMMC1>;
status = "disabled";
};
watchdog@53000000 {
interrupts = <1 9 27 3>;
+ clocks = <&clocks PCLK_WDT>;
+ clock-names = "watchdog";
};
rtc@57000000 {
compatible = "samsung,s3c2416-rtc";
+ clocks = <&clocks PCLK_RTC>;
+ clock-names = "rtc";
};
i2c@54000000 {
compatible = "samsung,s3c2440-i2c";
+ clocks = <&clocks PCLK_I2C0>;
+ clock-names = "i2c";
};
};
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 2eeeb55..f2fe2ad 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -50,9 +50,9 @@ config CPU_S3C2416
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
select S3C2416_PM if PM
- select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
- select SAMSUNG_CLKSRC
+ select COMMON_CLK
+ select S3C2443_COMMON_CLK
help
Support for the S3C2416 SoC from the S3C24XX line
@@ -85,9 +85,9 @@ config CPU_S3C2443
bool "SAMSUNG S3C2443"
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
- select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
- select SAMSUNG_CLKSRC
+ select COMMON_CLK
+ select S3C2443_COMMON_CLK
help
Support for the S3C2443 SoC from the S3C24XX line
@@ -664,12 +664,6 @@ endif # CPU_S3C2442
if CPU_S3C2443 || CPU_S3C2416
-config S3C2443_COMMON
- bool
- help
- Common code for the S3C2443 and similar processors, which includes
- the S3C2416 and S3C2450.
-
config S3C2443_COMMON_CLK
bool
help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 7f54e5b..ba0e547 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -26,7 +26,7 @@ obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
-obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o
+obj-$(CONFIG_CPU_S3C2416) += s3c2416.o
obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o
@@ -36,7 +36,7 @@ obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
-obj-$(CONFIG_CPU_S3C2443) += s3c2443.o clock-s3c2443.o
+obj-$(CONFIG_CPU_S3C2443) += s3c2443.o
# PM
@@ -53,7 +53,6 @@ obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o
obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o
-obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o
obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o
#
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
deleted file mode 100644
index d421a72..0000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/clock.c
- *
- * Copyright (c) 2010 Simtec Electronics
- * Copyright (c) 2010 Ben Dooks <ben-linux@xxxxxxxxx>
- *
- * S3C2416 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/pll.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-s3c2443-clock.h>
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
- * The real clock definition is done in s3c2443-clock.c,
- * only the armdiv divisor table must be defined here.
-*/
-
-static unsigned int armdiv[8] = {
- [0] = 1,
- [1] = 2,
- [2] = 3,
- [3] = 4,
- [5] = 6,
- [7] = 8,
-};
-
-static struct clksrc_clk hsspi_eplldiv = {
- .clk = {
- .name = "hsspi-eplldiv",
- .parent = &clk_esysclk.clk,
- .ctrlbit = (1 << 14),
- .enable = s3c2443_clkcon_enable_s,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 },
-};
-
-static struct clk *hsspi_sources[] = {
- [0] = &hsspi_eplldiv.clk,
- [1] = NULL, /* to fix */
-};
-
-static struct clksrc_clk hsspi_mux = {
- .clk = {
- .name = "hsspi-if",
- },
- .sources = &(struct clksrc_sources) {
- .sources = hsspi_sources,
- .nr_sources = ARRAY_SIZE(hsspi_sources),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 },
-};
-
-static struct clksrc_clk hsmmc_div[] = {
- [0] = {
- .clk = {
- .name = "hsmmc-div",
- .devname = "s3c-sdhci.0",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 },
- },
- [1] = {
- .clk = {
- .name = "hsmmc-div",
- .devname = "s3c-sdhci.1",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
- },
-};
-
-static struct clksrc_clk hsmmc_mux0 = {
- .clk = {
- .name = "hsmmc-if",
- .devname = "s3c-sdhci.0",
- .ctrlbit = (1 << 6),
- .enable = s3c2443_clkcon_enable_s,
- },
- .sources = &(struct clksrc_sources) {
- .nr_sources = 2,
- .sources = (struct clk * []) {
- [0] = &hsmmc_div[0].clk,
- [1] = NULL, /* to fix */
- },
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 },
-};
-
-static struct clksrc_clk hsmmc_mux1 = {
- .clk = {
- .name = "hsmmc-if",
- .devname = "s3c-sdhci.1",
- .ctrlbit = (1 << 12),
- .enable = s3c2443_clkcon_enable_s,
- },
- .sources = &(struct clksrc_sources) {
- .nr_sources = 2,
- .sources = (struct clk * []) {
- [0] = &hsmmc_div[1].clk,
- [1] = NULL, /* to fix */
- },
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 },
-};
-
-static struct clk hsmmc0_clk = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2416_HCLKCON_HSMMC0,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
- &hsspi_eplldiv,
- &hsspi_mux,
- &hsmmc_div[0],
- &hsmmc_div[1],
- &hsmmc_mux0,
- &hsmmc_mux1,
-};
-
-static struct clk_lookup s3c2416_clk_lookup[] = {
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
- /* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */
- CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk),
-};
-
-void __init s3c2416_init_clocks(int xtal)
-{
- u32 epllcon = __raw_readl(S3C2443_EPLLCON);
- u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4);
- int ptr;
-
- /* s3c2416 EPLL compatible with s3c64xx */
- clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1);
-
- clk_epll.parent = &clk_epllref.clk;
-
- s3c2443_common_init_clocks(xtal, s3c2416_get_pll,
- armdiv, ARRAY_SIZE(armdiv),
- S3C2416_CLKDIV0_ARMDIV_MASK);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_register_clksrc(clksrcs[ptr], 1);
-
- s3c24xx_register_clock(&hsmmc0_clk);
- clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup));
-
-}
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
deleted file mode 100644
index 76cd31f..0000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/* linux/arch/arm/mach-s3c2443/clock.c
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- *
- * S3C2443 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-/* clock selections */
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
- * The real clock definition is done in s3c2443-clock.c,
- * only the armdiv divisor table must be defined here.
-*/
-
-static unsigned int armdiv[16] = {
- [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1,
- [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2,
- [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3,
- [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4,
- [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6,
- [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8,
- [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12,
- [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16,
-};
-
-/* hsspi
- *
- * high-speed spi clock, sourced from esysclk
-*/
-
-static struct clksrc_clk clk_hsspi = {
- .clk = {
- .name = "hsspi-if",
- .parent = &clk_esysclk.clk,
- .ctrlbit = S3C2443_SCLKCON_HSSPICLK,
- .enable = s3c2443_clkcon_enable_s,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-
-/* clk_hsmcc_div
- *
- * this clock is sourced from epll, and is fed through a divider,
- * to a mux controlled by sclkcon where either it or a extclk can
- * be fed to the hsmmc block
-*/
-
-static struct clksrc_clk clk_hsmmc_div = {
- .clk = {
- .name = "hsmmc-div",
- .devname = "s3c-sdhci.1",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
-};
-
-static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2443_SCLKCON);
-
- clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT |
- S3C2443_SCLKCON_HSMMCCLK_EPLL);
-
- if (parent == &clk_epll)
- clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL;
- else if (parent == &clk_ext)
- clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT;
- else
- return -EINVAL;
-
- if (clk->usage > 0) {
- __raw_writel(clksrc, S3C2443_SCLKCON);
- }
-
- clk->parent = parent;
- return 0;
-}
-
-static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
-{
- return s3c2443_setparent_hsmmc(clk, clk->parent);
-}
-
-static struct clk clk_hsmmc = {
- .name = "hsmmc-if",
- .devname = "s3c-sdhci.1",
- .parent = &clk_hsmmc_div.clk,
- .enable = s3c2443_enable_hsmmc,
- .ops = &(struct clk_ops) {
- .set_parent = s3c2443_setparent_hsmmc,
- },
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
- {
- .name = "sdi",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_SDI,
- }, {
- .name = "spi",
- .devname = "s3c2410-spi.0",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_SPI1,
- }
-};
-
-/* clocks to add straight away */
-
-static struct clksrc_clk *clksrcs[] __initdata = {
- &clk_hsspi,
- &clk_hsmmc_div,
-};
-
-static struct clk *clks[] __initdata = {
- &clk_hsmmc,
-};
-
-static struct clk_lookup s3c2443_clk_lookup[] = {
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
- CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk),
-};
-
-void __init s3c2443_init_clocks(int xtal)
-{
- unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
- int ptr;
-
- clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
- clk_epll.parent = &clk_epllref.clk;
-
- s3c2443_common_init_clocks(xtal, s3c2443_get_mpll,
- armdiv, ARRAY_SIZE(armdiv),
- S3C2443_CLKDIV0_ARMDIV_MASK);
-
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_register_clksrc(clksrcs[ptr], 1);
-
- /* We must be careful disabling the clocks we are not intending to
- * be using at boot time, as subsystems such as the LCD which do
- * their own DMA requests to the bus can cause the system to lockup
- * if they where in the middle of requesting bus access.
- *
- * Disabling the LCD clock if the LCD is active is very dangerous,
- * and therefore the bootloader should be careful to not enable
- * the LCD clock if it is not needed.
- */
-
- /* install (and disable) the clocks we do not need immediately */
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-}
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
deleted file mode 100644
index 65d3eef..0000000
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ /dev/null
@@ -1,675 +0,0 @@
-/*
- * Common code for SoCs starting with the S3C2443
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-
-
-static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
-{
- u32 ctrlbit = clk->ctrlbit;
- u32 con = __raw_readl(reg);
-
- if (enable)
- con |= ctrlbit;
- else
- con &= ~ctrlbit;
-
- __raw_writel(con, reg);
- return 0;
-}
-
-int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
-{
- return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
-{
- return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
-{
- return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
-}
-
-/* mpllref is a direct descendant of clk_xtal by default, but it is not
- * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
- * such directly equating the two source clocks is impossible.
- */
-static struct clk clk_mpllref = {
- .name = "mpllref",
- .parent = &clk_xtal,
-};
-
-static struct clk *clk_epllref_sources[] = {
- [0] = &clk_mpllref,
- [1] = &clk_mpllref,
- [2] = &clk_xtal,
- [3] = &clk_ext,
-};
-
-struct clksrc_clk clk_epllref = {
- .clk = {
- .name = "epllref",
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_epllref_sources,
- .nr_sources = ARRAY_SIZE(clk_epllref_sources),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
-};
-
-/* esysclk
- *
- * this is sourced from either the EPLL or the EPLLref clock
-*/
-
-static struct clk *clk_sysclk_sources[] = {
- [0] = &clk_epllref.clk,
- [1] = &clk_epll,
-};
-
-struct clksrc_clk clk_esysclk = {
- .clk = {
- .name = "esysclk",
- .parent = &clk_epll,
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_sysclk_sources,
- .nr_sources = ARRAY_SIZE(clk_sysclk_sources),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
-};
-
-static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV0);
-
- div &= S3C2443_CLKDIV0_EXTDIV_MASK;
- div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */
-
- return parent_rate / (div + 1);
-}
-
-static struct clk clk_mdivclk = {
- .name = "mdivclk",
- .parent = &clk_mpllref,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2443_getrate_mdivclk,
- },
-};
-
-static struct clk *clk_msysclk_sources[] = {
- [0] = &clk_mpllref,
- [1] = &clk_mpll,
- [2] = &clk_mdivclk,
- [3] = &clk_mpllref,
-};
-
-static struct clksrc_clk clk_msysclk = {
- .clk = {
- .name = "msysclk",
- .parent = &clk_xtal,
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_msysclk_sources,
- .nr_sources = ARRAY_SIZE(clk_msysclk_sources),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
-};
-
-/* prediv
- *
- * this divides the msysclk down to pass to h/p/etc.
- */
-
-static unsigned long s3c2443_prediv_getrate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
- clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
- clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
-
- return rate / (clkdiv0 + 1);
-}
-
-static struct clk clk_prediv = {
- .name = "prediv",
- .parent = &clk_msysclk.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2443_prediv_getrate,
- },
-};
-
-/* hclk divider
- *
- * divides the prediv and provides the hclk.
- */
-
-static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
- clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
-
- return rate / (clkdiv0 + 1);
-}
-
-static struct clk_ops clk_h_ops = {
- .get_rate = s3c2443_hclkdiv_getrate,
-};
-
-/* pclk divider
- *
- * divides the hclk and provides the pclk.
- */
-
-static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
- clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0);
-
- return rate / (clkdiv0 + 1);
-}
-
-static struct clk_ops clk_p_ops = {
- .get_rate = s3c2443_pclkdiv_getrate,
-};
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
-*/
-
-static unsigned int *armdiv;
-static int nr_armdiv;
-static int armdivmask;
-
-static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- unsigned long calc;
- unsigned best = 256; /* bigger than any value */
- unsigned div;
- int ptr;
-
- if (!nr_armdiv)
- return -EINVAL;
-
- for (ptr = 0; ptr < nr_armdiv; ptr++) {
- div = armdiv[ptr];
- if (div) {
- /* cpufreq provides 266mhz as 266666000 not 266666666 */
- calc = (parent / div / 1000) * 1000;
- if (calc <= rate && div < best)
- best = div;
- }
- }
-
- return parent / best;
-}
-
-static unsigned long s3c2443_armclk_getrate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned long clkcon0;
- int val;
-
- if (!nr_armdiv || !armdivmask)
- return -EINVAL;
-
- clkcon0 = __raw_readl(S3C2443_CLKDIV0);
- clkcon0 &= armdivmask;
- val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT;
-
- return rate / armdiv[val];
-}
-
-static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- unsigned long calc;
- unsigned div;
- unsigned best = 256; /* bigger than any value */
- int ptr;
- int val = -1;
-
- if (!nr_armdiv || !armdivmask)
- return -EINVAL;
-
- for (ptr = 0; ptr < nr_armdiv; ptr++) {
- div = armdiv[ptr];
- if (div) {
- /* cpufreq provides 266mhz as 266666000 not 266666666 */
- calc = (parent / div / 1000) * 1000;
- if (calc <= rate && div < best) {
- best = div;
- val = ptr;
- }
- }
- }
-
- if (val >= 0) {
- unsigned long clkcon0;
-
- clkcon0 = __raw_readl(S3C2443_CLKDIV0);
- clkcon0 &= ~armdivmask;
- clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
- __raw_writel(clkcon0, S3C2443_CLKDIV0);
- }
-
- return (val == -1) ? -EINVAL : 0;
-}
-
-static struct clk clk_armdiv = {
- .name = "armdiv",
- .parent = &clk_msysclk.clk,
- .ops = &(struct clk_ops) {
- .round_rate = s3c2443_armclk_roundrate,
- .get_rate = s3c2443_armclk_getrate,
- .set_rate = s3c2443_armclk_setrate,
- },
-};
-
-/* armclk
- *
- * this is the clock fed into the ARM core itself, from armdiv or from hclk.
- */
-
-static struct clk *clk_arm_sources[] = {
- [0] = &clk_armdiv,
- [1] = &clk_h,
-};
-
-static struct clksrc_clk clk_arm = {
- .clk = {
- .name = "armclk",
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_arm_sources,
- .nr_sources = ARRAY_SIZE(clk_arm_sources),
- },
- .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
-};
-
-/* usbhost
- *
- * usb host bus-clock, usually 48MHz to provide USB bus clock timing
-*/
-
-static struct clksrc_clk clk_usb_bus_host = {
- .clk = {
- .name = "usb-bus-host-parent",
- .parent = &clk_esysclk.clk,
- .ctrlbit = S3C2443_SCLKCON_USBHOST,
- .enable = s3c2443_clkcon_enable_s,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-/* common clksrc clocks */
-
-static struct clksrc_clk clksrc_clks[] = {
- {
- /* camera interface bus-clock, divided down from esysclk */
- .clk = {
- .name = "camif-upll", /* same as 2440 name */
- .parent = &clk_esysclk.clk,
- .ctrlbit = S3C2443_SCLKCON_CAMCLK,
- .enable = s3c2443_clkcon_enable_s,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
- }, {
- .clk = {
- .name = "display-if",
- .parent = &clk_esysclk.clk,
- .ctrlbit = S3C2443_SCLKCON_DISPCLK,
- .enable = s3c2443_clkcon_enable_s,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
- },
-};
-
-static struct clksrc_clk clk_esys_uart = {
- /* ART baud-rate clock sourced from esysclk via a divisor */
- .clk = {
- .name = "uartclk",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
-};
-
-static struct clk clk_i2s_ext = {
- .name = "i2s-ext",
-};
-
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
- .clk = {
- .name = "i2s-eplldiv",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-static struct clk *clk_i2s_srclist[] = {
- [0] = &clk_i2s_eplldiv.clk,
- [1] = &clk_i2s_ext,
- [2] = &clk_epllref.clk,
- [3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
- .clk = {
- .name = "i2s-if",
- .ctrlbit = S3C2443_SCLKCON_I2SCLK,
- .enable = s3c2443_clkcon_enable_s,
-
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_i2s_srclist,
- .nr_sources = ARRAY_SIZE(clk_i2s_srclist),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
-static struct clk init_clocks_off[] = {
- {
- .name = "iis",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_IIS,
- }, {
- .name = "adc",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_ADC,
- }, {
- .name = "i2c",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_IIC,
- }
-};
-
-static struct clk init_clocks[] = {
- {
- .name = "dma.0",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA0,
- }, {
- .name = "dma.1",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA1,
- }, {
- .name = "dma.2",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA2,
- }, {
- .name = "dma.3",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA3,
- }, {
- .name = "dma.4",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA4,
- }, {
- .name = "dma.5",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA5,
- }, {
- .name = "gpio",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_GPIO,
- }, {
- .name = "usb-host",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_USBH,
- }, {
- .name = "usb-device",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_USBD,
- }, {
- .name = "lcd",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_LCDC,
-
- }, {
- .name = "timers",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_PWMT,
- }, {
- .name = "cfc",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_CFC,
- }, {
- .name = "ssmc",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_SSMC,
- }, {
- .name = "uart",
- .devname = "s3c2440-uart.0",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_UART0,
- }, {
- .name = "uart",
- .devname = "s3c2440-uart.1",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_UART1,
- }, {
- .name = "uart",
- .devname = "s3c2440-uart.2",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_UART2,
- }, {
- .name = "uart",
- .devname = "s3c2440-uart.3",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_UART3,
- }, {
- .name = "rtc",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_RTC,
- }, {
- .name = "watchdog",
- .parent = &clk_p,
- .ctrlbit = S3C2443_PCLKCON_WDT,
- }, {
- .name = "ac97",
- .parent = &clk_p,
- .ctrlbit = S3C2443_PCLKCON_AC97,
- }, {
- .name = "nand",
- .parent = &clk_h,
- }, {
- .name = "usb-bus-host",
- .parent = &clk_usb_bus_host.clk,
- }
-};
-
-static struct clk hsmmc1_clk = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_HSMMC,
-};
-
-static struct clk hsspi_clk = {
- .name = "spi",
- .devname = "s3c2443-spi.0",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_HSSPI,
-};
-
-/* EPLLCON compatible enough to get on/off information */
-
-void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
-{
- unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
- unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
- struct clk *xtal_clk;
- unsigned long xtal;
- unsigned long pll;
- int ptr;
-
- xtal_clk = clk_get(NULL, "xtal");
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- pll = get_mpll(mpllcon, xtal);
- clk_msysclk.clk.rate = pll;
- clk_mpll.rate = pll;
-
- printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
- (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
- print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)),
- print_mhz(clk_get_rate(&clk_h)),
- print_mhz(clk_get_rate(&clk_p)));
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
- s3c_set_clksrc(&clksrc_clks[ptr], true);
-
- /* ensure usb bus clock is within correct rate of 48MHz */
-
- if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
- printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
- clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
- }
-
- printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
- (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
- print_mhz(clk_get_rate(&clk_epll)),
- print_mhz(clk_get_rate(&clk_usb_bus)));
-}
-
-static struct clk *clks[] __initdata = {
- &clk_prediv,
- &clk_mpllref,
- &clk_mdivclk,
- &clk_ext,
- &clk_epll,
- &clk_usb_bus,
- &clk_armdiv,
- &hsmmc1_clk,
- &hsspi_clk,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
- &clk_i2s_eplldiv,
- &clk_i2s,
- &clk_usb_bus_host,
- &clk_epllref,
- &clk_esysclk,
- &clk_msysclk,
- &clk_arm,
-};
-
-static struct clk_lookup s3c2443_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
- CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk),
-};
-
-void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
- unsigned int *divs, int nr_divs,
- int divmask)
-{
- int ptr;
-
- armdiv = divs;
- nr_armdiv = nr_divs;
- armdivmask = divmask;
-
- /* s3c2443 parents h clock from prediv */
- clk_h.parent = &clk_prediv;
- clk_h.ops = &clk_h_ops;
-
- /* and p clock from h clock */
- clk_p.parent = &clk_h;
- clk_p.ops = &clk_p_ops;
-
- clk_usb_bus.parent = &clk_usb_bus_host.clk;
- clk_epll.parent = &clk_epllref.clk;
-
- s3c24xx_register_baseclocks(xtal);
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_register_clksrc(clksrcs[ptr], 1);
-
- s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
- /* See s3c2443/etc notes on disabling clocks at init time */
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-
- s3c2443_common_setup_clocks(get_mpll);
-}
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 4adaa4b..d87e432 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -145,7 +145,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32450003,
.idmask = 0xffffffff,
.map_io = s3c2416_map_io,
- .init_clocks = s3c2416_init_clocks,
.init_uarts = s3c2416_init_uarts,
.init = s3c2416_init,
.name = name_s3c2416,
@@ -154,7 +153,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32443001,
.idmask = 0xffffffff,
.map_io = s3c2443_map_io,
- .init_clocks = s3c2443_init_clocks,
.init_uarts = s3c2443_init_uarts,
.init = s3c2443_init,
.name = name_s3c2443,
@@ -535,3 +533,17 @@ struct platform_device s3c2443_device_dma = {
},
};
#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2416)
+void __init s3c2416_init_clocks(int xtal)
+{
+ s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2443)
+void __init s3c2443_init_clocks(int xtal)
+{
+ s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+}
+#endif
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index e46c104..d7323f1 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -114,4 +114,10 @@ extern struct platform_device s3c2412_device_dma;
extern struct platform_device s3c2440_device_dma;
extern struct platform_device s3c2443_device_dma;
+#ifdef CONFIG_S3C2443_COMMON_CLK
+void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
+ int current_soc,
+ void __iomem *reg_base);
+#endif
+
#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
index f50454a..0a86953 100644
--- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
+++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
@@ -18,59 +18,23 @@
#include <linux/clocksource.h>
#include <linux/irqchip.h>
#include <linux/of_platform.h>
-#include <linux/serial_core.h>
#include <asm/mach/arch.h>
#include <mach/map.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/regs-serial.h>
#include "common.h"
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the S3C2416 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART,
- "s3c2440-uart.0", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000,
- "s3c2440-uart.1", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000,
- "s3c2440-uart.2", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000,
- "s3c2440-uart.3", NULL),
- OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0,
- "s3c-sdhci.0", NULL),
- OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1,
- "s3c-sdhci.1", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC,
- "s3c2440-i2c.0", NULL),
- {},
-};
-
static void __init s3c2416_dt_map_io(void)
{
s3c24xx_init_io(NULL, 0);
- s3c24xx_init_clocks(12000000);
}
static void __init s3c2416_dt_machine_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- s3c2416_auxdata_lookup, NULL);
-
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
s3c_pm_init();
}
@@ -86,6 +50,5 @@ DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)")
.map_io = s3c2416_dt_map_io,
.init_irq = irqchip_init,
.init_machine = s3c2416_dt_machine_init,
- .init_time = clocksource_of_init,
.restart = s3c2416_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index f88e672..3ec6d49 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -218,10 +218,15 @@ static struct platform_device *smdk2416_devices[] __initdata = {
&s3c2443_device_dma,
};
+static void __init smdk2416_init_time(void)
+{
+ s3c2416_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init smdk2416_map_io(void)
{
s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
- s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
@@ -256,6 +261,6 @@ MACHINE_START(SMDK2416, "SMDK2416")
.init_irq = s3c2416_init_irq,
.map_io = smdk2416_map_io,
.init_machine = smdk2416_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = smdk2416_init_time,
.restart = s3c2416_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index d9933fc..58da97b 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -121,11 +121,16 @@ static struct platform_device *smdk2443_devices[] __initdata = {
static void __init smdk2443_map_io(void)
{
s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
- s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init smdk2443_init_time(void)
+{
+ s3c2443_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init smdk2443_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -145,6 +150,6 @@ MACHINE_START(SMDK2443, "SMDK2443")
.init_irq = s3c2443_init_irq,
.map_io = smdk2443_map_io,
.init_machine = smdk2443_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = smdk2443_init_time,
.restart = s3c2443_restart,
MACHINE_END
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
