I have development board whose SoC is exynos4412, I try to enable the
usb in it but I failed. I saw the document
Documentation/devicetree/bindings/usb/samsung-usbphy.txt, does it mean
that the usb driver is not done?
And about that document, in samsung datasheet(32.8.2), the address reg
0x125B_0000 + 32bits contains hsic1, hsic0, phy1 and phy0's power
control. And in 0x1002_0704 + 3 * 32 bits, it contains usb_phy,
hsic1_phy and hsic2_phy control(8.8.1.27). So I doubt the documents.
Here is the log and dts
===========================log================================
[ 1.000000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.010000] ehci-exynos: EHCI EXYNOS driver
[ 1.015000] unable to find transceiver of type USB2 PHY
[ 1.020000] exynos-ehci 12580000.ehci: no platform data or
transceiver defined
[ 1.025000] platform 12580000.ehci: Driver exynos-ehci requests probe
deferral
================================dts==================================
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts
b/arch/arm/boot/dts/exynos4412-tiny4412.dts
new file mode 100644
index 0000000..c8d4cfa
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -0,0 +1,176 @@
+/*
+ * Hardkernel's Exynos4412 based tiny4412 1306 board device tree source
+ *
+ * Copyright (c) 2013 Tomoya Gitsufuki <ayaka@xxxxxxxxxxxxxxxx>
+ *
+ * Device tree source file for Friendyarm tiny4412 1306 board which is
based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+
+/ {
+ model = "Friendly Arm Tiny4412 1306 board based on Exynos4412";
+ compatible = "friendlyarm,tiny4412-1306", "samsung,exynos4412";
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs ="root=/dev/mmcblk0p1 rootfstype=ext4 rw
console=ttySAC0,115200 init=/sbin/init";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "led1:heart";
+ gpios = <&gpm4 0 1>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ led2 {
+ label = "led2:mmc0";
+ gpios = <&gpm4 1 1>;
+ default-state = "on";
+ linux,default-trigger = "mmc0";
+ };
+
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+
+ vemmc_reg: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpk0 2 0>;
+ enable-active-high;
+ };
+
+ };
+
+ /*
+ mshc@12550000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ vmmc-supply = <&vemmc_reg>;
+ clocks = <&clock 301>, <&clock 149>;
+ clocks-name = "dwmci", "sclk_dwmci";
+ clock-frequency = <400000000>;
+
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+
+ };
+ };
+ */
+
+ rtc@10070000 {
+ status = "okay";
+ };
+
+ sdhci@12530000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ sdhci@1254000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &sd3_cd>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ usb_phy: usbphy@125B0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "samsung,exynos4210-usbphy";
+ reg = <0x12B0000 0x100>;
+ ranges;
+
+ clocks = <&clock 2>, <&clock 305>;
+ clock-names = "xusbxti", "otg";
+ usbphy-sys {
+ /* USB device and host PHY_CONTROL registers */
+ reg = <0x10020704 0x8>;
+ };
+ };
+
+ ehci@12580000 {
+ usb-phy = <&usb_phy>;
+ status = "okay";
+ };
+
+ ohci@12590000 {
+ status = "okay";
+ };
+
+
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+ };
+
+ serial@13800000 {
+ status = "okay";
+ };
+
+ serial@13810000 {
+ status = "okay";
+ };
+
+ serial@13820000 {
+ status = "okay";
+ };
+
+ serial@13830000 {
+ status = "okay";
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ i2c@13860000 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <200000>;
+
+ wm8960@10 {
+ compatible = "wlf,wm8960";
+ reg = <0x10>;
+ };
+ };
+};
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index f156010..f640ddf 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -1084,6 +1084,12 @@ static const struct i2c_device_id wm8960_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, wm8960_i2c_id);
+static const struct of_device_id wm8960_of_match[] = {
+ { .compatible = "wlf,wm8960", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, wm8960_of_match);
+
static struct i2c_driver wm8960_i2c_driver = {
.driver = {
.name = "wm8960",
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
