On Mon, November 25, 2013, Olof Johansson wrote: > Hi, > > On Sun, Nov 24, 2013 at 4:07 AM, randy <lxr1234@xxxxxxxxxxx> wrote: > > -----BEGIN PGP SIGNED MESSAGE----- > > Hash: SHA1 > > > > After pull the merge of 3.13-rc1, the dw_mmc-exynos will make the boot > > stock.In 3.13, it is just stocked udev in 3.13 and makse udev timeout > > but kernel report the emmc device is found. > > > > And in the Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt I > > saw that it is need to define which gpio ports that a emmc slot use, > > but when I watched others dts, they use pinctrl, which is correct? > > Here is the log and dts > > [..] > > > =======================log begin ============================= > [..] > > [ 0.000000] CPU EXYNOS4412 (id 0xe4412011) > > [..] > > > [ 1.095000] mmc0: no vmmc regulator found > > [ 1.130000] mmc0: SDHCI controller on samsung-hsmmc > > [12530000.sdhci] using ADMA > > [ 1.130000] Synopsys Designware Multimedia Card Interface Driver > > [ 1.130000] Unable to handle kernel NULL pointer dereference at > > virtual address 0000002a > > [ 1.130000] pgd = c0004000 > > [ 1.130000] [0000002a] *pgd=00000000 > > [ 1.135000] Internal error: Oops: 5 [#1] PREEMPT SMP ARM > > [ 1.140000] Modules linked in: > > [ 1.140000] CPU: 0 PID: 1 Comm: swapper/0 Not tainted > > 3.13.0-rc1-00008-g584fa45-dirty #3 > > [ 1.150000] task: ef0a4000 ti: ef0a8000 task.ti: ef0a8000 > > [ 1.155000] PC is at clk_get_rate+0x18/0x5c > > [ 1.160000] LR is at clk_prepare_lock+0xc/0xd8 > > [ 1.165000] pc : [<c0319400>] lr : [<c0318864>] psr: a0000113 > > [ 1.165000] sp : ef0a9e20 ip : ee94eb40 fp : 00000000 > > [ 1.175000] r10: c0571510 r9 : ef0a8000 r8 : ef227a10 > > [ 1.180000] r7 : c043544c r6 : fffffffe r5 : ee94ead0 r4 : fffffffe > > [ 1.185000] r3 : ef0a4000 r2 : 00000001 r1 : 000002b9 r0 : 00000001 > > [ 1.195000] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM > > Segment kernel > > [ 1.200000] Control: 10c5387d Table: 4000404a DAC: 00000015 > > [ 1.205000] Process swapper/0 (pid: 1, stack limit = 0xef0a8240) > > [ 1.210000] Stack: (0xef0a9e20 to 0xef0aa000) > > [ 1.215000] 9e20: c0308474 ee9ea610 ee94ead0 c0308488 c0308474 > > ee9ea610 00000000 c030592c > > [ 1.225000] 9e40: ef227a10 00001000 c043544c c020a920 c0838b04 > > 17d78400 ee9ea610 ef227a00 > > [ 1.235000] 9e60: ef227a10 c05d6b1c 00000000 c05d6b1c c05890b0 > > ef0a8000 c0571510 c0269448 > > [ 1.240000] 9e80: c0269430 ef227a10 c061291c c0268088 00000000 > > ef227a10 c05d6b1c ef227a44 > > [ 1.250000] 9ea0: 00000000 c026822c 00000000 c05d6b1c c02681a0 > > c02668a8 ef005478 ef212740 > > [ 1.255000] 9ec0: c05d6b1c ef2c7900 c05cf438 c0267864 c0511e38 > > c05d6b1c 00000006 c05d6b1c > > [ 1.265000] 9ee0: 00000006 c059575c c05df580 c026884c 00000000 > > c05a2e14 00000006 c00088dc > > [ 1.275000] 9f00: c0603f70 ef163e00 c040e334 60000113 c05b5000 > > a0000113 c05b5054 c05b5050 > > [ 1.280000] 9f20: c05df580 c054ad68 c0839c96 c04247b4 00000093 > > c0035158 c05b5054 c05a2a20 > > [ 1.290000] 9f40: c050ae2c c054a438 00000006 00000006 00000000 > > c05a2e14 00000006 c059575c > > [ 1.300000] 9f60: c05df580 00000093 c0595768 c0571510 00000000 > > c0571c48 00000006 00000006 > > [ 1.305000] 9f80: c0571510 c003df68 00000000 c0403544 00000000 > > 00000000 00000000 00000000 > > [ 1.315000] 9fa0: 00000000 c040354c 00000000 c000e738 00000000 > > 00000000 00000000 00000000 > > [ 1.320000] 9fc0: 00000000 00000000 00000000 00000000 00000000 > > 00000000 00000000 00000000 > > [ 1.330000] 9fe0: 00000000 00000000 00000000 00000000 00000013 > > 00000000 be73efa4 ffffbffd > > [ 1.340000] [<c0319400>] (clk_get_rate+0x18/0x5c) from [<c0308488>] > > (dw_mci_exynos_setup_clock+0x14/0x2c) > > [ 1.350000] [<c0308488>] (dw_mci_exynos_setup_clock+0x14/0x2c) from > > [<c030592c>] (dw_mci_probe+0x15c/0xca4) > > [ 1.360000] [<c030592c>] (dw_mci_probe+0x15c/0xca4) from > > [<c0269448>] (platform_drv_probe+0x18/0x48) > > [ 1.365000] [<c0269448>] (platform_drv_probe+0x18/0x48) from > > [<c0268088>] (driver_probe_device+0x100/0x218) > > [ 1.375000] [<c0268088>] (driver_probe_device+0x100/0x218) from > > [<c026822c>] (__driver_attach+0x8c/0x90) > > [ 1.385000] [<c026822c>] (__driver_attach+0x8c/0x90) from > > [<c02668a8>] (bus_for_each_dev+0x54/0x88) > > [ 1.395000] [<c02668a8>] (bus_for_each_dev+0x54/0x88) from > > [<c0267864>] (bus_add_driver+0xd4/0x1d0) > > [ 1.405000] [<c0267864>] (bus_add_driver+0xd4/0x1d0) from > > [<c026884c>] (driver_register+0x78/0xf4) > > [ 1.415000] [<c026884c>] (driver_register+0x78/0xf4) from > > [<c00088dc>] (do_one_initcall+0xec/0x148) > > [ 1.420000] [<c00088dc>] (do_one_initcall+0xec/0x148) from > > [<c0571c48>] (kernel_init_freeable+0xfc/0x1c8) > > [ 1.430000] [<c0571c48>] (kernel_init_freeable+0xfc/0x1c8) from > > [<c040354c>] (kernel_init+0x8/0x110) > > [ 1.440000] [<c040354c>] (kernel_init+0x8/0x110) from [<c000e738>] > > (ret_from_fork+0x14/0x3c) > > [ 1.450000] Code: ebfffd18 e3540000 01a05004 0a000008 (e594302c) > > > Looks like a clock issue on 4412? I only have 5250 that I boot test > on, no EXYNOS4 coverage at all (I had an Odroid-X but it wasn't useful > due to the very old u-boot it came with so I gave it away). > > Tomasz, is this something you can reproduce on 4210/4412? Thank you for detect. Clock adaptation has been added for upper host including EXYNOS 5250 since c6d9d(mmc: dw_mmc: exynos: adjust the clock rate with speed mode) It should have been considered for all EXYNOS. I could send a fix. Thanks, Seungwon -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |