Re: [PATCH V9 2/3] watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Guenter Roeck,

On Tue, Nov 19, 2013 at 10:30 AM, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
> On 11/18/2013 08:36 PM, Leela Krishna Amudala wrote:
>>
>> Hi Guenter Roeck,
>>
>> Thanks for reviewing the patch.
>>
>>
>> On Mon, Nov 18, 2013 at 10:12 PM, Guenter Roeck <linux@xxxxxxxxxxxx>
>> wrote:
>>>
>>> On Mon, Nov 18, 2013 at 03:19:48PM +0530, Leela Krishna Amudala wrote:
>>>>
>>>> Add device tree support for exynos5250 and 5420 SoCs and use syscon
>>>> regmap interface
>>>> to configure AUTOMATIC_WDT_RESET_DISABLE and MASK_WDT_RESET_REQUEST
>>>> registers of PMU
>>>> to mask/unmask enable/disable of watchdog in probe and s2r scenarios.
>>>>
>>>> Signed-off-by: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
>>>> ---
>>>>   .../devicetree/bindings/watchdog/samsung-wdt.txt   |   21 ++-
>>>>   drivers/watchdog/Kconfig                           |    1 +
>>>>   drivers/watchdog/s3c2410_wdt.c                     |  145
>>>> ++++++++++++++++++--
>>>>   3 files changed, 157 insertions(+), 10 deletions(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
>>>> b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
>>>> index 2aa486c..5dea363 100644
>>>> --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
>>>> +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
>>>> @@ -5,10 +5,29 @@ after a preset amount of time during which the WDT
>>>> reset event has not
>>>>   occurred.
>>>>
>>>>   Required properties:
>>>> -- compatible : should be "samsung,s3c2410-wdt"
>>>> +- compatible : should be one among the following
>>>> +     (a) "samsung,s3c2410-wdt" for Exynos4 and previous SoCs
>>>> +     (b) "samsung,exynos5250-wdt" for Exynos5250
>>>> +     (c) "samsung,exynos5420-wdt" for Exynos5420
>>>> +
>>>>   - reg : base physical address of the controller and length of memory
>>>> mapped
>>>>        region.
>>>>   - interrupts : interrupt number to the cpu.
>>>> +- samsung,syscon-phandle : reference to syscon node (This property
>>>> required only
>>>> +     in case of compatible being "samsung,exynos5250-wdt" or
>>>> "samsung,exynos5420-wdt".
>>>> +     In case of Exynos5250 and 5420 this property points to syscon node
>>>> holding the PMU
>>>> +     base address)
>>>>
>>>>   Optional properties:
>>>>   - timeout-sec : contains the watchdog timeout in seconds.
>>>> +
>>>> +Example:
>>>> +
>>>> +watchdog@101D0000 {
>>>> +     compatible = "samsung,exynos5250-wdt";
>>>> +     reg = <0x101D0000 0x100>;
>>>> +     interrupts = <0 42 0>;
>>>> +     clocks = <&clock 336>;
>>>> +     clock-names = "watchdog";
>>>> +     samsung,syscon-phandle = <&pmu_sys_reg>;
>>>> +};
>>>> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
>>>> index d1d53f3..0d272ae 100644
>>>> --- a/drivers/watchdog/Kconfig
>>>> +++ b/drivers/watchdog/Kconfig
>>>> @@ -188,6 +188,7 @@ config S3C2410_WATCHDOG
>>>>        tristate "S3C2410 Watchdog"
>>>>        depends on HAVE_S3C2410_WATCHDOG
>>>>        select WATCHDOG_CORE
>>>> +     select MFD_SYSCON if ARCH_EXYNOS5
>>>>        help
>>>>          Watchdog timer block in the Samsung SoCs. This will reboot
>>>>          the system when the timer expires with the watchdog enabled.
>>>> diff --git a/drivers/watchdog/s3c2410_wdt.c
>>>> b/drivers/watchdog/s3c2410_wdt.c
>>>> index 23aad7c..42e0fd3 100644
>>>> --- a/drivers/watchdog/s3c2410_wdt.c
>>>> +++ b/drivers/watchdog/s3c2410_wdt.c
>>>> @@ -41,6 +41,8 @@
>>>>   #include <linux/slab.h>
>>>>   #include <linux/err.h>
>>>>   #include <linux/of.h>
>>>> +#include <linux/mfd/syscon.h>
>>>> +#include <linux/regmap.h>
>>>>
>>>>   #define S3C2410_WTCON                0x00
>>>>   #define S3C2410_WTDAT                0x04
>>>> @@ -61,6 +63,10 @@
>>>>   #define CONFIG_S3C2410_WATCHDOG_ATBOOT               (0)
>>>>   #define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME (15)
>>>>
>>>> +#define WDT_DISABLE_REG_OFFSET               0x0408
>>>> +#define WDT_MASK_RESET_REG_OFFSET    0x040c
>>>> +#define QUIRK_NEEDS_PMU_CONFIG               (1 << 0)
>>>> +
>>>>   static bool nowayout = WATCHDOG_NOWAYOUT;
>>>>   static int tmr_margin;
>>>>   static int tmr_atboot        = CONFIG_S3C2410_WATCHDOG_ATBOOT;
>>>> @@ -84,6 +90,13 @@ MODULE_PARM_DESC(soft_noboot, "Watchdog action, set
>>>> to 1 to ignore reboots, "
>>>>                        "0 to reboot (default 0)");
>>>>   MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default
>>>> 0)");
>>>>
>>>> +struct s3c2410_wdt_variant {
>>>> +     int disable_reg;
>>>> +     int mask_reset_reg;
>>>> +     int mask_bit;
>>>> +     u32 quirks;
>>>> +};
>>>> +
>>>>   struct s3c2410_wdt {
>>>>        struct device           *dev;
>>>>        struct clk              *clock;
>>>> @@ -94,7 +107,49 @@ struct s3c2410_wdt {
>>>>        unsigned long           wtdat_save;
>>>>        struct watchdog_device  wdt_device;
>>>>        struct notifier_block   freq_transition;
>>>> +     struct s3c2410_wdt_variant *drv_data;
>>>> +     struct regmap *pmureg;
>>>> +};
>>>> +
>>>> +static const struct s3c2410_wdt_variant drv_data_s3c2410 = {
>>>> +     .quirks = 0
>>>> +};
>>>> +
>>>> +#ifdef CONFIG_OF
>>>> +static const struct s3c2410_wdt_variant drv_data_exynos5250  = {
>>>> +     .disable_reg = WDT_DISABLE_REG_OFFSET,
>>>> +     .mask_reset_reg = WDT_MASK_RESET_REG_OFFSET,
>>>> +     .mask_bit = 20,
>>>> +     .quirks = QUIRK_NEEDS_PMU_CONFIG
>>>> +};
>>>> +
>>>> +static const struct s3c2410_wdt_variant drv_data_exynos5420 = {
>>>> +     .disable_reg = WDT_DISABLE_REG_OFFSET,
>>>> +     .mask_reset_reg = WDT_MASK_RESET_REG_OFFSET,
>>>> +     .mask_bit = 0,
>>>> +     .quirks = QUIRK_NEEDS_PMU_CONFIG
>>>> +};
>>>> +
>>>> +static const struct of_device_id s3c2410_wdt_match[] = {
>>>> +     { .compatible = "samsung,s3c2410-wdt",
>>>> +       .data = &drv_data_s3c2410 },
>>>> +     { .compatible = "samsung,exynos5250-wdt",
>>>> +       .data = &drv_data_exynos5250 },
>>>> +     { .compatible = "samsung,exynos5420-wdt",
>>>> +       .data = &drv_data_exynos5420 },
>>>> +     {},
>>>>   };
>>>> +MODULE_DEVICE_TABLE(of, s3c2410_wdt_match);
>>>> +#endif
>>>> +
>>>> +static const struct platform_device_id s3c2410_wdt_ids[] = {
>>>> +     {
>>>> +             .name = "s3c2410-wdt",
>>>> +             .driver_data = (unsigned long)&drv_data_s3c2410,
>>>> +     },
>>>> +     {}
>>>> +};
>>>> +MODULE_DEVICE_TABLE(platform, s3c2410_wdt_ids);
>>>>
>>>>   /* watchdog control routines */
>>>>
>>>> @@ -111,6 +166,26 @@ static inline struct s3c2410_wdt
>>>> *freq_to_wdt(struct notifier_block *nb)
>>>>        return container_of(nb, struct s3c2410_wdt, freq_transition);
>>>>   }
>>>>
>>>> +static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt,
>>>> bool mask)
>>>> +{
>>>> +     int ret;
>>>> +     u32 mask_val = 1 << wdt->drv_data->mask_bit;
>>>> +     u32 val = 0;
>>>> +
>>>> +     if (mask)
>>>> +             val = mask_val;
>>>> +
>>>> +     ret = regmap_update_bits(wdt->pmureg,
>>>> +                     wdt->drv_data->disable_reg,
>>>> +                     mask_val, val);
>>>> +     if (ret < 0)
>>>> +             return ret;
>>>> +
>>>> +     return regmap_update_bits(wdt->pmureg,
>>>> +                     wdt->drv_data->mask_reset_reg,
>>>> +                     mask_val, val);
>>>> +}
>>>> +
>>>>   static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
>>>>   {
>>>>        struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
>>>> @@ -332,6 +407,20 @@ static inline void
>>>> s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
>>>>   }
>>>>   #endif
>>>>
>>>> +/* s3c2410_get_wdt_driver_data */
>>>> +static inline struct s3c2410_wdt_variant *
>>>> +get_wdt_drv_data(struct platform_device *pdev)
>>>> +{
>>>> +     if (pdev->dev.of_node) {
>>>> +             const struct of_device_id *match;
>>>> +             match = of_match_node(s3c2410_wdt_match,
>>>> pdev->dev.of_node);
>>>> +             return (struct s3c2410_wdt_variant *)match->data;
>>>> +     } else {
>>>> +             return (struct s3c2410_wdt_variant *)
>>>> +                     platform_get_device_id(pdev)->driver_data;
>>>> +     }
>>>> +}
>>>> +
>>>>   static int s3c2410wdt_probe(struct platform_device *pdev)
>>>>   {
>>>>        struct device *dev;
>>>> @@ -354,6 +443,16 @@ static int s3c2410wdt_probe(struct platform_device
>>>> *pdev)
>>>>        spin_lock_init(&wdt->lock);
>>>>        wdt->wdt_device = s3c2410_wdd;
>>>>
>>>> +     wdt->drv_data = get_wdt_drv_data(pdev);
>>>> +     if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
>>>> +             wdt->pmureg =
>>>> syscon_regmap_lookup_by_phandle(dev->of_node,
>>>> +
>>>> "samsung,syscon-phandle");
>>>> +             if (IS_ERR(wdt->pmureg)) {
>>>> +                     dev_err(dev, "syscon regmap lookup failed.\n");
>>>> +                     return PTR_ERR(wdt->pmureg);
>>>> +             }
>>>> +     }
>>>> +
>>>>        wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
>>>>        if (wdt_irq == NULL) {
>>>>                dev_err(dev, "no irq resource specified\n");
>>>> @@ -444,6 +543,14 @@ static int s3c2410wdt_probe(struct platform_device
>>>> *pdev)
>>>>                 (wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis",
>>>>                 (wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis");
>>>>
>>>> +     if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
>>>> +             ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
>>>> +             if (ret < 0) {
>>>> +                     dev_err(wdt->dev, "failed to update pmu
>>>> register");
>>>
>>>
>>> Hmm ... still not happy ;-). This message is the same for each call
>>> to s3c2410wdt_mask_and_disable_reset(). Why not create it there ?
>>> Sure, you'd have to decide if you want to use dev_warn() or dev_err(),
>>> but that would still be better than repeating the same message (and code)
>>> five times.
>>>
>>> The same is true for the if() statement. It might be worthwhile calling
>>> s3c2410wdt_mask_and_disable_reset() unconditionally and adding something
>>> like
>>>
>>>          if (!(wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG))
>>>                  return 0;
>>>
>>> to it.
>>>
>>
>> As Tomasz Figa suggested I handled the error conditions here
>> Please go through this link for your reference
>> https://patchwork.kernel.org/patch/3118771/
>>
>
> His proposed function had the error message in the function,
> so I am not entirely following your logic.
>
> He said you should _handle_ the error condition in the calling code.
> Dumping an error message and doing nothing isn't really "handling"
> the error condition.
>

I know printing an error message is not really "handling" the error condition.
But apart from probe function I don't have anything to handle in remove,
shutdown, suspend and resume functions.
In remove, shutdown, suspend funtions I must do stop/deregister
the device even if regmap_update_bits fails so I simply do dev_warn
and continuing

So I removed the error message prints in the s3c2410wdt_mask_and_disable_reset
function and added it in the above mentioned functions as part of
error handling.

Best Wishes,
Leela Krishna.


> Guenter
>
>> Best Wishes,
>> Leela Krishna.
>>
>>> Thanks,
>>> Guenter
>>>
>>>> +                     goto err_cpufreq;
>>>> +             }
>>>> +     }
>>>> +
>>>>        return 0;
>>>>
>>>>    err_cpufreq:
>>>> @@ -459,8 +566,15 @@ static int s3c2410wdt_probe(struct platform_device
>>>> *pdev)
>>>>
>>>>   static int s3c2410wdt_remove(struct platform_device *dev)
>>>>   {
>>>> +     int ret;
>>>>        struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
>>>>
>>>> +     if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
>>>> +             ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
>>>> +             if (ret < 0)
>>>> +                     dev_warn(wdt->dev, "failed to update pmu
>>>> register");
>>>> +     }
>>>> +
>>>>        watchdog_unregister_device(&wdt->wdt_device);
>>>>
>>>>        s3c2410wdt_cpufreq_deregister(wdt);
>>>> @@ -473,8 +587,15 @@ static int s3c2410wdt_remove(struct platform_device
>>>> *dev)
>>>>
>>>>   static void s3c2410wdt_shutdown(struct platform_device *dev)
>>>>   {
>>>> +     int ret;
>>>>        struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
>>>>
>>>> +     if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
>>>> +             ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
>>>> +             if (ret < 0)
>>>> +                     dev_warn(wdt->dev, "failed to update pmu
>>>> register");
>>>> +     }
>>>> +
>>>>        s3c2410wdt_stop(&wdt->wdt_device);
>>>>   }
>>>>
>>>> @@ -482,12 +603,19 @@ static void s3c2410wdt_shutdown(struct
>>>> platform_device *dev)
>>>>
>>>>   static int s3c2410wdt_suspend(struct device *dev)
>>>>   {
>>>> +     int ret;
>>>>        struct s3c2410_wdt *wdt = dev_get_drvdata(dev);
>>>>
>>>>        /* Save watchdog state, and turn it off. */
>>>>        wdt->wtcon_save = readl(wdt->reg_base + S3C2410_WTCON);
>>>>        wdt->wtdat_save = readl(wdt->reg_base + S3C2410_WTDAT);
>>>>
>>>> +     if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
>>>> +             ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
>>>> +             if (ret < 0)
>>>> +                     dev_warn(wdt->dev, "failed to update pmu
>>>> register");
>>>> +     }
>>>> +
>>>>        /* Note that WTCNT doesn't need to be saved. */
>>>>        s3c2410wdt_stop(&wdt->wdt_device);
>>>>
>>>> @@ -496,6 +624,7 @@ static int s3c2410wdt_suspend(struct device *dev)
>>>>
>>>>   static int s3c2410wdt_resume(struct device *dev)
>>>>   {
>>>> +     int ret;
>>>>        struct s3c2410_wdt *wdt = dev_get_drvdata(dev);
>>>>
>>>>        /* Restore watchdog state. */
>>>> @@ -503,6 +632,12 @@ static int s3c2410wdt_resume(struct device *dev)
>>>>        writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTCNT);/* Reset
>>>> count */
>>>>        writel(wdt->wtcon_save, wdt->reg_base + S3C2410_WTCON);
>>>>
>>>> +     if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
>>>> +             ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
>>>> +             if (ret < 0)
>>>> +                     dev_warn(wdt->dev, "failed to update pmu
>>>> register");
>>>> +     }
>>>> +
>>>>        dev_info(dev, "watchdog %sabled\n",
>>>>                (wdt->wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
>>>>
>>>> @@ -513,18 +648,11 @@ static int s3c2410wdt_resume(struct device *dev)
>>>>   static SIMPLE_DEV_PM_OPS(s3c2410wdt_pm_ops, s3c2410wdt_suspend,
>>>>                        s3c2410wdt_resume);
>>>>
>>>> -#ifdef CONFIG_OF
>>>> -static const struct of_device_id s3c2410_wdt_match[] = {
>>>> -     { .compatible = "samsung,s3c2410-wdt" },
>>>> -     {},
>>>> -};
>>>> -MODULE_DEVICE_TABLE(of, s3c2410_wdt_match);
>>>> -#endif
>>>> -
>>>>   static struct platform_driver s3c2410wdt_driver = {
>>>>        .probe          = s3c2410wdt_probe,
>>>>        .remove         = s3c2410wdt_remove,
>>>>        .shutdown       = s3c2410wdt_shutdown,
>>>> +     .id_table       = s3c2410_wdt_ids,
>>>>        .driver         = {
>>>>                .owner  = THIS_MODULE,
>>>>                .name   = "s3c2410-wdt",
>>>> @@ -540,4 +668,3 @@ MODULE_AUTHOR("Ben Dooks <ben@xxxxxxxxxxxx>, "
>>>>   MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
>>>>   MODULE_LICENSE("GPL");
>>>>   MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
>>>> -MODULE_ALIAS("platform:s3c2410-wdt");
>>>> --
>>>> 1.7.10.4
>>>>
>>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe
>>> linux-samsung-soc" in
>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-watchdog"
>> in
>>
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc"
> in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux