[PATCH V8 0/3] Add watchdog DT nodes and use syscon regmap interfac to configure pmu registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patchset does the following things
	- Adds pmusysreg device node to exynos5.dtsi file
	- Adds watchdog DT nodes to Exynos5250 and 5420
	- Uses syscon regmap interface to configure pmu registers
	  to mask/unmask enable/disable of watchdog.
	
This patch set is rebased on Kgene's for-next branch and tested on SMDK5420

changes since V7:
	- re-ordered the patches in the series
	- moved pmu_config_s3c2410 structure out of ifdef CONFIG_OF
	  and limited only this structure to platform match table
	- renamed structure name from s3c_wdt_driver_ids to s3c2410_wdt_ids
	- removed exynos variants from platform match table
	  (suggested by Tomasz Figa <t.figa@xxxxxxxxxxx>)

changes since V6:
	- added SoC-specific compatible value to syscon node and documented it
	- given more patch description for below patch
	  ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420
	- added platform_device_id array for watchdog devices
	- selected MFD_SYSCON in Kconfig entry for watchdog

Changes since V5:
	- removed status property in DT nodes
	- changed the return type for the function s3c2410wdt_mask_and_disable_reset()
	  and handled error cases
	- Handled to get driver data in non-DT cases
	- Addressed comments given by Tomasz Figa <t.figa@xxxxxxxxxxx>

Changes since V4:
	- changed the node name from pmusysreg to syscon and node label from pmu_sys_reg to pmu_syscon
	- changed the property name from samsung,pmusysreg to samsung,syscon-phandle
	- used regmap_update_bits instead of remap_read/regmap_write
	- Addressed other comments given by Tomasz Figa <t.figa@xxxxxxxxxxx>

Changes since V3:
	- changed the compatible strings for watchdog node
	- splitted up adding pmusysreg node and made it separate patch
	- Addressed comments given by Sachin Kamat <sachin.kamat@xxxxxxxxxx>

Changes since V2:
	- used syscon regmap interface to configure pmu registers in WDT driver
	  (suggested by Tomasz Figa <t.figa@xxxxxxxxxxx>)

Changes since V1:
        - Added new compatible string for Exynos5 SoCs
        - Introduced quirk mechanism to program PMU registers
        - Addressed comments given by Tomasz Figa <t.figa@xxxxxxxxxxx>

Leela Krishna Amudala (3):
  ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
  watchdog: s3c2410_wdt: add device tree support and use syscon regmap
    interface to configure pmu register
  ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420

 .../devicetree/bindings/arm/samsung/pmu.txt        |   13 ++
 .../devicetree/bindings/watchdog/samsung-wdt.txt   |   21 ++-
 arch/arm/boot/dts/exynos5.dtsi                     |    7 -
 arch/arm/boot/dts/exynos5250.dtsi                  |   11 +-
 arch/arm/boot/dts/exynos5420.dtsi                  |   14 ++
 drivers/watchdog/Kconfig                           |    1 +
 drivers/watchdog/s3c2410_wdt.c                     |  148 ++++++++++++++++++--
 7 files changed, 198 insertions(+), 17 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.txt

-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux