On Wednesday, November 06, 2013 06:58:45 PM Naveen Krishna Chatradhi wrote: > This patch adds the neccessary register changes and arch information > to support Exynos5420 SoCs > Exynos5420 has 5 TMU channels one for each CPU 0, 1, 2 and 3 and GPU > > Also updated the Documentation at > Documentation/devicetree/bindings/thermal/exynos-thermal.txt > > Note: The platform data structure will be handled properly once the driver > moves to complete device driver solution. > > Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx> > --- > Changes since v1: > 1. modified the platform data structure in order to pass SHARED flag > for channels that need sharing of address space. > 2. https://lkml.org/lkml/2013/8/1/38 is merged into this patch. > As the changes are minimum and can be added here. > Changes since v3: > a. Rearraged the code alphabetically, make exynso5420 come before exynso5440 > b. Reduce code duplication in passing platform data by introducing a common macro > Bartlomiej Zolnierkiewicz Thanks for review and suggestions > Changes since v4: > None > Changes since v5: > None > Changes since v6: > - removed the unsued field "inten_fall_shift" I cannot find this change in the patch below, also this should be done in patch #1/3 not in #3/3. > - defined EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT instead of using EXYNOS_TMU_FALL_INT_SHIFT The code below still uses EXYNOS_TMU_FALL_INT_SHIFT and EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT is not defined anywhere. Have you posted the right patches? > .../devicetree/bindings/thermal/exynos-thermal.txt | 39 ++++++++ > drivers/thermal/samsung/exynos_tmu.c | 12 ++- > drivers/thermal/samsung/exynos_tmu.h | 1 + > drivers/thermal/samsung/exynos_tmu_data.c | 99 ++++++++++++++++++++ > drivers/thermal/samsung/exynos_tmu_data.h | 7 ++ > 5 files changed, 157 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt > index 116cca0..c5f9a74 100644 > --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt > +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt > @@ -6,6 +6,7 @@ > "samsung,exynos4412-tmu" > "samsung,exynos4210-tmu" > "samsung,exynos5250-tmu" > + "samsung,exynos5420-tmu" > "samsung,exynos5440-tmu" > - interrupt-parent : The phandle for the interrupt controller > - reg : Address range of the thermal registers. For soc's which has multiple > @@ -13,6 +14,16 @@ > interrupt related then 2 set of register has to supplied. First set > belongs to each instance of TMU and second set belongs to second set > of common TMU registers. > + NOTE: On Exynos5420, the TRIMINFO register is misplaced for TMU > + channels 2, 3 and 4 > + > + TRIMINFO at 0x1006c000 contains data for TMU channel 3 > + TRIMINFO at 0x100a0000 contains data for TMU channel 4 > + TRIMINFO at 0x10068000 contains data for TMU channel 2 > + > + The misplaced register address is passed through devicetree as the > + second base > + > - interrupts : Should contain interrupt for thermal system > - clocks : The main clock for TMU device > - clock-names : Thermal system clock name > @@ -43,6 +54,34 @@ Example 2): > clock-names = "tmu_apbif"; > }; > > +Example 3): (In case of Exynos5420) > + /* tmu for CPU2 */ > + tmu@10068000 { > + compatible = "samsung,exynos5420-tmu"; > + reg = <0x10068000 0x100>, <0x1006c000 0x4>; > + interrupts = <0 184 0>; > + clocks = <&clock 318>; > + clock-names = "tmu_apbif"; > + }; > + > + /* tmu for CPU3 */ > + tmu@1006c000 { > + compatible = "samsung,exynos5420-tmu"; > + reg = <0x1006c000 0x100>, <0x100a0000 0x4>; > + interrupts = <0 185 0>; > + clocks = <&clock 318>; > + clock-names = "tmu_apbif"; > + }; > + > + /* tmu for GPU */ > + tmu@100a0000 { > + compatible = "samsung,exynos5420-tmu"; > + reg = <0x100a0000 0x100>, <0x10068000 0x4>; > + interrupts = <0 215 0>; > + clocks = <&clock 318>; > + clock-names = "tmu_apbif"; > + }; > + > Note: For multi-instance tmu each instance should have an alias correctly > numbered in "aliases" node. > > diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c > index ae80a87..b54825a 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -186,7 +186,12 @@ static int exynos_tmu_initialize(struct platform_device *pdev) > EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data); > } > } else { > - trim_info = readl(data->base + reg->triminfo_data); > + /* On exynos5420 the triminfo register is in the shared space */ > + if (data->base_second && (data->soc == SOC_ARCH_EXYNOS5420)) > + trim_info = readl(data->base_second + > + reg->triminfo_data); > + else > + trim_info = readl(data->base + reg->triminfo_data); > } > data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK; > data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) & > @@ -498,6 +503,10 @@ static const struct of_device_id exynos_tmu_match[] = { > .data = (void *)EXYNOS5250_TMU_DRV_DATA, > }, > { > + .compatible = "samsung,exynos5420-tmu", > + .data = (void *)EXYNOS5420_TMU_DRV_DATA, > + }, > + { > .compatible = "samsung,exynos5440-tmu", > .data = (void *)EXYNOS5440_TMU_DRV_DATA, > }, > @@ -635,6 +644,7 @@ static int exynos_tmu_probe(struct platform_device *pdev) > if (pdata->type == SOC_ARCH_EXYNOS4210 || > pdata->type == SOC_ARCH_EXYNOS4412 || > pdata->type == SOC_ARCH_EXYNOS5250 || > + pdata->type == SOC_ARCH_EXYNOS5420 || > pdata->type == SOC_ARCH_EXYNOS5440) > data->soc = pdata->type; > else { > diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h > index d79264f..4b9be23 100644 > --- a/drivers/thermal/samsung/exynos_tmu.h > +++ b/drivers/thermal/samsung/exynos_tmu.h > @@ -43,6 +43,7 @@ enum soc_type { > SOC_ARCH_EXYNOS4210 = 1, > SOC_ARCH_EXYNOS4412, > SOC_ARCH_EXYNOS5250, > + SOC_ARCH_EXYNOS5420, > SOC_ARCH_EXYNOS5440, > }; > > diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c > index ad424ad..c876b1e 100644 > --- a/drivers/thermal/samsung/exynos_tmu_data.c > +++ b/drivers/thermal/samsung/exynos_tmu_data.c > @@ -195,6 +195,105 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = { > }; > #endif > > +#if defined(CONFIG_SOC_EXYNOS5420) > +static const struct exynos_tmu_registers exynos5420_tmu_registers = { > + .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, > + .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, > + .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, > + .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, > + .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, > + .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, > + .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, > + .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, > + .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, > + .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, > + .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, > + .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, > + .tmu_status = EXYNOS_TMU_REG_STATUS, > + .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, > + .threshold_th0 = EXYNOS_THD_TEMP_RISE, > + .threshold_th1 = EXYNOS_THD_TEMP_FALL, > + .tmu_inten = EXYNOS_TMU_REG_INTEN, > + .inten_rise_mask = EXYNOS_TMU_RISE_INT_MASK, > + .inten_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, > + .inten_fall_mask = EXYNOS_TMU_FALL_INT_MASK, > + .inten_fall_shift = EXYNOS_TMU_FALL_INT_SHIFT, > + .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT, > + .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT, > + .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT, > + /* INTEN_RISE3 Not availble in exynos5420 */ > + .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT, > + .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, > + .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, > + .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, > + .intclr_fall_shift = EXYNOS_TMU_FALL_INT_SHIFT, > + .emul_con = EXYNOS_EMUL_CON, > + .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, > + .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, > + .emul_time_mask = EXYNOS_EMUL_TIME_MASK, > +}; > + > +#define __EXYNOS5420_TMU_DATA \ > + .threshold_falling = 10, \ > + .trigger_levels[0] = 85, \ > + .trigger_levels[1] = 103, \ > + .trigger_levels[2] = 110, \ > + .trigger_levels[3] = 120, \ > + .trigger_enable[0] = true, \ > + .trigger_enable[1] = true, \ > + .trigger_enable[2] = true, \ > + .trigger_enable[3] = false, \ > + .trigger_type[0] = THROTTLE_ACTIVE, \ > + .trigger_type[1] = THROTTLE_ACTIVE, \ > + .trigger_type[2] = SW_TRIP, \ > + .trigger_type[3] = HW_TRIP, \ > + .max_trigger_level = 4, \ > + .gain = 8, \ > + .reference_voltage = 16, \ > + .noise_cancel_mode = 4, \ > + .cal_type = TYPE_ONE_POINT_TRIMMING, \ > + .efuse_value = 55, \ > + .min_efuse_value = 40, \ > + .max_efuse_value = 100, \ > + .first_point_trim = 25, \ > + .second_point_trim = 85, \ > + .default_temp_offset = 50, \ > + .freq_tab[0] = { \ > + .freq_clip_max = 800 * 1000, \ > + .temp_level = 85, \ > + }, \ > + .freq_tab[1] = { \ > + .freq_clip_max = 200 * 1000, \ > + .temp_level = 103, \ > + }, \ > + .freq_tab_count = 2, \ > + .type = SOC_ARCH_EXYNOS5420, \ > + .registers = &exynos5420_tmu_registers, \ > + > +#define EXYNOS5420_TMU_DATA \ > + __EXYNOS5420_TMU_DATA \ > + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ > + TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ > + TMU_SUPPORT_EMUL_TIME) > + > +#define EXYNOS5420_TMU_DATA_SHARED \ > + __EXYNOS5420_TMU_DATA \ > + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ > + TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ > + TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE) > + > +struct exynos_tmu_init_data const exynos5420_default_tmu_data = { > + .tmu_data = { > + { EXYNOS5420_TMU_DATA }, > + { EXYNOS5420_TMU_DATA }, > + { EXYNOS5420_TMU_DATA_SHARED }, > + { EXYNOS5420_TMU_DATA_SHARED }, > + { EXYNOS5420_TMU_DATA_SHARED }, > + }, > + .tmu_count = 5, > +}; > +#endif > + > #if defined(CONFIG_SOC_EXYNOS5440) > static const struct exynos_tmu_registers exynos5440_tmu_registers = { > .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM, > diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h > index bb412bb..eb2cb92 100644 > --- a/drivers/thermal/samsung/exynos_tmu_data.h > +++ b/drivers/thermal/samsung/exynos_tmu_data.h > @@ -158,6 +158,13 @@ extern struct exynos_tmu_init_data const exynos5250_default_tmu_data; > #define EXYNOS5250_TMU_DRV_DATA (NULL) > #endif > > +#if defined(CONFIG_SOC_EXYNOS5420) > +extern struct exynos_tmu_init_data const exynos5420_default_tmu_data; > +#define EXYNOS5420_TMU_DRV_DATA (&exynos5420_default_tmu_data) > +#else > +#define EXYNOS5420_TMU_DRV_DATA (NULL) > +#endif > + > #if defined(CONFIG_SOC_EXYNOS5440) > extern struct exynos_tmu_init_data const exynos5440_default_tmu_data; > #define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data) Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |