Re: [PATCH v3 1/3] phy: Add new Exynos USB PHY driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wednesday 06 November 2013 05:08 PM, Tomasz Figa wrote:
Hi Kishon

On Wednesday 06 of November 2013 13:48:13 Kishon Vijay Abraham I wrote:
Hi,

On Tuesday 05 November 2013 09:43 PM, Kamil Debski wrote:
Add a new driver for the Exynos USB PHY. The new driver uses the generic
PHY framework. The driver includes support for the Exynos 4x10 and 4x12
SoC families.

Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
   .../devicetree/bindings/phy/samsung-usbphy.txt     |   52 ++++
   drivers/phy/Kconfig                                |   23 +-
   drivers/phy/Makefile                               |    4 +
   drivers/phy/phy-exynos-usb2.c                      |  234 ++++++++++++++
   drivers/phy/phy-exynos-usb2.h                      |   87 ++++++
   drivers/phy/phy-exynos4210-usb2.c                  |  272 ++++++++++++++++
   drivers/phy/phy-exynos4212-usb2.c                  |  324 ++++++++++++++++++++
   7 files changed, 995 insertions(+), 1 deletion(-)
   create mode 100644 Documentation/devicetree/bindings/phy/samsung-usbphy.txt
   create mode 100644 drivers/phy/phy-exynos-usb2.c
   create mode 100644 drivers/phy/phy-exynos-usb2.h
   create mode 100644 drivers/phy/phy-exynos4210-usb2.c
   create mode 100644 drivers/phy/phy-exynos4212-usb2.c
[snip]
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index a344f3d..bdf0fab 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
[snip]
@@ -51,4 +51,25 @@ config PHY_EXYNOS_DP_VIDEO
   	help
   	  Support for Display Port PHY found on Samsung EXYNOS SoCs.

+config PHY_EXYNOS_USB2
+	tristate "Samsung USB 2.0 PHY driver"
+	help
+	  Enable this to support Samsung USB phy helper driver for Samsung SoCs.
+	  This driver provides common interface to interact, for Samsung
+	  USB 2.0 PHY driver.

I still think we can get rid of this helper driver and have a single
driver for both PHY_EXYNOS4210_USB2 and PHY_EXYNOS4212_USB2.

This helper driver is a really nice way to avoid code duplication, while
still leaving the code clean and readable.

All the Samsung USB 2.0 PHYs require exactly the same semantics
(isolation, reference rate configuration, power up, power on), but each
one has completely different layout of registers and bits inside
registers.

I just did a diff of registers in exynos 4210 and 4212 PHY drivers [1] and couldn't find that big a difference in register layout. Of course there are a few changes in HSIC bit fields and PHYFSEL but that's only minimal and could well be handled in a single driver.

[1] -> http://diffchecker.com/py3tp68m

Making a big single driver would end up being identical to the old Exynos
USB2PHY driver with a lot of if and switch statements inside most of
functions, which is not only ugly but makes any further extension hard.

Probably we shouldn't try to over design and just convert the old exynos usb2 phy driver to the generic phy framework to begin with?

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux