Re: [PATCH V5 0/3] Add watchdog DT nodes and use syscon regmap interfac to configure pmu registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Leela,

On 31 October 2013 11:30, Leela Krishna Amudala <l.krishna@xxxxxxxxxxx> wrote:
> This patchset does the following things
>         - Adds pmusysreg device node to exynos5.dtsi file
>         - Adds watchdog DT nodes to Exynos5250 and 5420
>         - Uses syscon regmap interface to configure pmu registers
>           to mask/unmask enable/disable of watchdog.
>
> This patch set is rebased on Kgene's for-next branch and tested on SMDK5420
>
> Changes since V4:
>         - changed the node name from pmusysreg to syscon and node label from pmu_sys_reg to pmu_syscon
>         - changed the property name from samsung,pmusysreg to samsung,syscon-phandle
>         - used regmap_update_bits instead of remap_read/regmap_write
>         - Addressed other comments given by Tomasz Figa <t.figa@xxxxxxxxxxx>
>
> Changes since V3:
>         - changed the compatible strings for watchdog node
>         - splitted up adding pmusysreg node and made it separate patch
>         - Addressed comments given by Sachin Kamat <sachin.kamat@xxxxxxxxxx>
>
> Changes since V2:
>         - used syscon regmap interface to configure pmu registers in WDT driver
>           (suggested by Tomasz Figa <t.figa@xxxxxxxxxxx>)
>
> Changes since V1:
>         - Added new compatible string for Exynos5 SoCs
>         - Introduced quirk mechanism to program PMU registers
>         - Addressed comments given by Tomasz Figa <t.figa@xxxxxxxxxxx>
>
> Leela Krishna Amudala (3):
>   ARM: dts: Add pmu sysreg node to Exynos5 dtsi file
>   ARM: dts: add watchdog device nodes for Exynos5250 and Exynos5420
>   watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu
>     register
>
>  .../devicetree/bindings/watchdog/samsung-wdt.txt   |   22 ++-
>  arch/arm/boot/dts/exynos5.dtsi                     |   12 +-
>  arch/arm/boot/dts/exynos5250.dtsi                  |    7 +-
>  arch/arm/boot/dts/exynos5420.dtsi                  |   10 ++
>  drivers/watchdog/s3c2410_wdt.c                     |  150 +++++++++++++++++---
>  5 files changed, 175 insertions(+), 26 deletions(-)
>
> --
> 1.7.10.4
>

Series looks good. However, you would need to add select MFD_SYSCON option to
watchdog Kconfig for ARCH_EXYNOS5.

Tested this series on Origen (4210), Arndale (5250) and SMDK5420 boards.

Tested-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
Reviewed-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx>

-- 
With warm regards,
Sachin
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux