RE: [PATCH 3/5] drm/bridge: Add PTN3460 bridge driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Mark Brown [mailto:broonie@xxxxxxxxxx]
> Sent: Thursday, October 10, 2013 3:29 AM
> To: Inki Dae
> Cc: Olof Johansson; Sean Paul; devicetree@xxxxxxxxxxxxxxx; linux-samsung-
> soc@xxxxxxxxxxxxxxx; linux-doc@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; DRI mailing list; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [PATCH 3/5] drm/bridge: Add PTN3460 bridge driver
> 
> On Fri, Oct 04, 2013 at 11:05:48AM +0900, Inki Dae wrote:
> > 2013/10/4 Olof Johansson <olof@xxxxxxxxx>:
> 
> > > "If PD_N is LOW, then the device is in Deep power-down completely,
> > > even if supply rail is ON; for the device to be able to operate, the
> > > PD_N pin must be HIGH."
> 
> > I still think the pin could be replaced with a regulator. But
> > lvds-bridge node has "powerdown-gpio" property - it say this board
> > will use gpio pin - specific to board.  So it seems no problem.
> 
> No, don't model things that aren't regulators as regulators - it's just
> confusing from a usability standpoint and causes breakage when the pins
> don't behave like regulators.

It seems that there was your missing point. That _is not_ what I mentioned.
I mean that other boards can use a regulator instead of gpio pin.




--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux