[PATCH 09/10] pwm-backlight: Use an optional power supply

[Thierry Reding <thierry.reding@xxxxxxxxx>]

Many backlights require a power supply to work properly. This commit
uses a power-supply regulator, if available, to power up and power down
the panel.

Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
 .../bindings/video/backlight/pwm-backlight.txt      |  2 ++
 drivers/video/backlight/pwm_bl.c                    | 21 +++++++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
index 052eb03..3898f26 100644
--- a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
+++ b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
@@ -15,6 +15,7 @@ Optional properties:
   - pwm-names: a list of names for the PWM devices specified in the
                "pwms" property (see PWM binding[0])
   - enable-gpios: a list of GPIOs to enable and disable the backlight
+  - power-supply: regulator for supply voltage
 
 [0]: Documentation/devicetree/bindings/pwm/pwm.txt
 
@@ -28,4 +29,5 @@ Example:
 		default-brightness-level = <6>;
 
 		enable-gpios = <&gpio 58 0>;
+		power-supply = <&vdd_bl_reg>;
 	};
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 506810c..a2b3876 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -21,6 +21,7 @@
 #include <linux/err.h>
 #include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 
 struct pwm_bl_data {
@@ -29,6 +30,7 @@ struct pwm_bl_data {
 	unsigned int		period;
 	unsigned int		lth_brightness;
 	unsigned int		*levels;
+	struct regulator	*power_supply;
 	int			enable_gpio;
 	unsigned long		enable_gpio_flags;
 	int			(*notify)(struct device *,
@@ -56,6 +58,12 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness,
 
 	pwm_config(pb->pwm, duty_cycle, pb->period);
 
+	if (pb->power_supply) {
+		err = regulator_enable(pb->power_supply);
+		if (err < 0)
+			dev_err(pb->dev, "failed to enable power supply\n");
+	}
+
 	if (gpio_is_valid(pb->enable_gpio)) {
 		if (pb->enable_gpio_flags & PWM_BACKLIGHT_GPIO_ACTIVE_LOW)
 			gpio_set_value(pb->enable_gpio, 0);
@@ -76,6 +84,9 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb)
 		else
 			gpio_set_value(pb->enable_gpio, 0);
 	}
+
+	if (pb->power_supply)
+		regulator_disable(pb->power_supply);
 }
 
 static int pwm_backlight_update_status(struct backlight_device *bl)
@@ -253,6 +264,16 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 		}
 	}
 
+	pb->power_supply = devm_regulator_get_optional(&pdev->dev, "power");
+	if (IS_ERR(pb->power_supply)) {
+		if (PTR_ERR(pb->power_supply) != -ENODEV) {
+			ret = PTR_ERR(pb->power_supply);
+			goto err_gpio;
+		}
+
+		pb->power_supply = NULL;
+	}
+
 	pb->pwm = devm_pwm_get(&pdev->dev, NULL);
 	if (IS_ERR(pb->pwm)) {
 		dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n");
-- 
1.8.4

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html