Re: [PATCH] ARM: dts: Fix gpio pin of lcd_en node for exynos4210

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3 September 2013 13:03, Jingoo Han <jg1.han@xxxxxxxxxxx> wrote:
> On Tuesday, September 03, 2013 3:52 PM, Tushar Behera wrote:
>> On 3 September 2013 07:44, Jingoo Han <jg1.han@xxxxxxxxxxx> wrote:
>> > According to datasheet, 'lcd_en' node should use gpf0-2,
>> > instead of gpe3-4. gpe3-4 is used for MDM_DATA[4]; thus,
>> > it should be fixed.
>> >
>> > Signed-off-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
>> > ---
>> >  arch/arm/boot/dts/exynos4210-pinctrl.dtsi |    2 +-
>> >  1 file changed, 1 insertion(+), 1 deletion(-)
>> >
>> > diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
>> > index a7c2128..da5dd8d 100644
>> > --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
>> > +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
>> > @@ -374,7 +374,7 @@
>> >                 };
>> >
>> >                 lcd_en: lcd-en {
>> > -                       samsung,pins = "gpe3-4";
>> > +                       samsung,pins = "gpf0-2";
>> >                         samsung,pin-function = <2>;
>> >                         samsung,pin-pud = <0>;
>> >                         samsung,pin-drv = <0>;
>>
>> With this change, the LCD display stops working on Origen board.
>
> The smdkv310 board worked properly.
> gpe3-4 seems to be necessary for Origen board.
> Can you describe why gpe3-4 is necessary for Origen board?
>

Without setting this pin, LCD panel doesn't power up. It is quite
possible that this is Origen specific. In that case, how do you
suggest to implement this for Origen board?

> According to the datasheet, pin-function of gpe3-4 is defined
> as MDM_DATA[4]. So, the node name 'lcd_en' is wrong or confusing.
>
>>
>> gpf0-{0,1,2,3} are defined under lcd_clk.
>
> Then will you test the following on Origen board?
>
> +++ b/arch/arm/boot/dts/exynos4210-origen.dts
> @@ -293,7 +293,7 @@
>         };
>
>         fimd@11c00000 {
> -               pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
> +               pinctrl-0 = <&lcd_clk &lcd_data24 &pwm0_out>;
>

No, this doesn't work on Origen.

-- 
Tushar Behera
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux