On 27 August 2013 05:10, Tomasz Figa <tomasz.figa@xxxxxxxxx> wrote:
> Hi Rahul,
>
> On Monday 26 of August 2013 15:08:21 Rahul Sharma wrote:
>> Adding information about clocks to the binding documentation
>> for exynos mixer and hdmi.
>>
>> Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
>> ---
>> Documentation/devicetree/bindings/video/exynos_hdmi.txt | 14
>> +++++++++++++- Documentation/devicetree/bindings/video/exynos_mixer.txt
>> | 4 ++++ 2 files changed, 17 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt
>> b/Documentation/devicetree/bindings/video/exynos_hdmi.txt index
>> 323983b..94aaa7d 100644
>> --- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt
>> +++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
>> @@ -12,7 +12,19 @@ Required properties:
>> a) phandle of the gpio controller node.
>> b) pin number within the gpio controller.
>> c) optional flags and pull up/down.
>> -
>> +- clocks: list of clock IDs from SoC clock driver.
>> + a) hdmi: It is required for gate operation on aclk_200_disp1 clock
>> + which clocks the display1 block.
>
> Isn't aclk_200_disp1 a name specific to Exynos5 SoCs? AFAIK this binding
> is also used for other SoCs, including Exynos4 and probably S5PV210, so it
> should be written to either be SoC-agnostic or account for all supported
> SoCs. What about following descriptions:
>
> Gate of HDMI IP block bus clock.
>
>> + b) sclk_hdmi: It is required for gate operation on sclk_hdmi clock
>> + which clocks hdmi IP.
>
> Gate of HDMI special clock.
>
>> + c) sclk_pixel: Parent for mux mout_hdmi.
>
> Pixel special clock, one of two possible inputs of HDMI clock mux.
>
>> + d) sclk_hdmiphy: Parent for mux mout_hdmi.
>
> HDMI PHY clock output, one of two possible inputs of HDMI clock mux.
>
>> + e) mout_hdmi: It is required by the driver to switch between the 2
>> + parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is
> stable
>> + after configuration, parent is set to sclk_hdmiphy else
>> + sclk_pixel.
>
> HDMI clock mux, used to select between clock generated by HDMI PHY and
> alternative clock source that can be used until HDMI PHY is set up.
>
>> +- clock-names: aliases as per driver requirements for above clock IDs:
>> + "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
>> Example:
>>
>> hdmi {
>> diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt
>> b/Documentation/devicetree/bindings/video/exynos_mixer.txt index
>> 3334b0a..94b40b6 100644
>> --- a/Documentation/devicetree/bindings/video/exynos_mixer.txt
>> +++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt
>> @@ -10,6 +10,10 @@ Required properties:
>> - reg: physical base address of the mixer and length of memory mapped
>> region.
>> - interrupts: interrupt number to the cpu.
>> +- clocks: list of clock IDs from SoC clock driver.
>> + a) mixer: It is required for gate operation on aclk_200_disp1
> clock
>
> Gate of Mixer IP bus clock.
>
>> + which clocks the display1 block.
>> + b) sclk_hdmi: Parent for mux mout_mixer.
>
> I'm not sure why this clock is needed here. Could you explain what role it
> plays in functioning of the Mixer IP?
>
I have done above rephrasing.
For exynos4 socs, sclk_mixer can have sclk_hdmi or sclk_dac as inputs.
mout_mixer
is configured to select sclk_hdmi. I am not sure that how sclk_mixer
is utilized inside
mixer hardware.
regards,
Rahul Sharma.
> Best regards,
> Tomasz
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
