On 24 July 2013 11:29, Dongjin Kim <tobetter@xxxxxxxxx> wrote:
> Thanks Sachin,
>
> On Wed, Jul 24, 2013 at 2:12 PM, Sachin Kamat <sachin.kamat@xxxxxxxxxx> wrote:
>> Hi Dongjin,
>>
>> On 23 July 2013 23:01, Dongjin Kim <tobetter@xxxxxxxxx> wrote:
>>> This patch adds device nodes for USBPHY to Exynos4x12.
>>>
>>> Signed-off-by: Dongjin Kim <tobetter@xxxxxxxxx>
>>> ---
>>> arch/arm/boot/dts/exynos4x12.dtsi | 18 ++++++++++++++++++
>>> 1 file changed, 18 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
>>> index 01da194..9c3335b 100644
>>> --- a/arch/arm/boot/dts/exynos4x12.dtsi
>>> +++ b/arch/arm/boot/dts/exynos4x12.dtsi
>>> @@ -73,4 +73,22 @@
>>> clock-names = "sclk_fimg2d", "fimg2d";
>>> status = "disabled";
>>> };
>>> +
>>> + usbphy@125B00000 {
>>
>> Extra 0 above.
>>
> This is my bad, I will fix.
>
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + compatible = "samsung,exynos4x12-usb2phy";
>>> + reg = <0x125B0000 0x100>;
>>> + ranges;
>>> +
>>> + clocks = <&clock 2>, <&clock 305>;
>>> + clock-names = "xusbxti", "otg";
>>> + status = "disabled";
>>> +
>>> + usbphy-sys {
>>> + /* USB device and host PHY_CONTROL registers */
>>> + reg = <0x10020704 0xc>,
>>> + <0x1001021c 0x4>;
>>> + };
>>> + };
>>> };
>>
>> Please add this node after tmu node (satisfies alphabetical order as
>> well as increasing address value)
> No tmu node in exynos4x12.dtsi in mainline v3.11-rc2 yet, even in
> Kukjin's branch.
Sorry, that patch is not yet applied to for-next. I will re-send
again. You may ignore this comment for now.
--
With warm regards,
Sachin
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
