Re: [PATCH V3 18/21] thermal: exynos: Add support for exynos5440 TMU sensor.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09-05-2013 22:31, amit daniel kachhap wrote:
> Hi Eduardo,
> 
> On Thu, May 9, 2013 at 8:17 PM, Eduardo Valentin
> <eduardo.valentin@xxxxxx> wrote:
>> Hey Amit,
>>
>> On 07-05-2013 09:01, Amit Daniel Kachhap wrote:
>>> This patch modifies TMU controller to add changes needed to work with
>>> exynos5440 platform. Also register definitions and required configuration data
>>> are added. This sensor registers 3 instance of the tmu controller with the
>>> thermal zone and hence reports 3 temperature output. This controller supports
>>> upto five trip points. For critical threshold the driver uses the core driver
>>> thermal framework for shutdown.
>>>
>>
>> I would kindly request you to split this patch. Looks like you add
>> altogether in one patch both data, driver adaptation (for your new soc)
>> and on top, new features. I would suggest splitting this things in
>> smaller steps. Easier to review, track, bitsec and find bugs (if any).
> 
> Yes your suggestion sounds reasonable. Will split into at least 3 patches.

Thanks.

> 
> Thanks,
> Amit
>>
>>> Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
>>> Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
>>> ---
>>>  .../devicetree/bindings/thermal/exynos-thermal.txt |   28 ++++-
>>>  drivers/thermal/samsung/Kconfig                    |    4 +-
>>>  drivers/thermal/samsung/exynos_thermal_common.c    |    2 +-
>>>  drivers/thermal/samsung/exynos_tmu.c               |  139 +++++++++++++++++---
>>>  drivers/thermal/samsung/exynos_tmu.h               |    7 +
>>>  drivers/thermal/samsung/exynos_tmu_data.c          |   66 +++++++++-
>>>  drivers/thermal/samsung/exynos_tmu_data.h          |   40 ++++++
>>>  7 files changed, 261 insertions(+), 25 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
>>> index 535fd0e..970eeba 100644
>>> --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
>>> +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
>>> @@ -6,13 +6,16 @@
>>>              "samsung,exynos4412-tmu"
>>>              "samsung,exynos4210-tmu"
>>>              "samsung,exynos5250-tmu"
>>> +            "samsung,exynos5440-tmu"
>>>  - interrupt-parent : The phandle for the interrupt controller
>>> -- reg : Address range of the thermal registers
>>> +- reg : Address range of the thermal registers. For exynos5440-tmu which has 3
>>> +     instances of TMU, 2 set of register has to supplied. First set belongs
>>> +     to each instance of TMU and second set belongs to common TMU registers.
>>>  - interrupts : Should contain interrupt for thermal system
>>>  - clocks : The main clock for TMU device
>>>  - clock-names : Thermal system clock name
>>>
>>> -Example:
>>> +Example 1):
>>>
>>>       tmu@100C0000 {
>>>               compatible = "samsung,exynos4412-tmu";
>>> @@ -23,3 +26,24 @@ Example:
>>>               clock-names = "tmu_apbif";
>>>               status = "disabled";
>>>       };
>>> +
>>> +Example 2):
>>> +
>>> +     tmuctrl_0: tmuctrl@160118 {
>>> +             compatible = "samsung,exynos5440-tmu";
>>> +             reg = <0x160118 0x230>, <0x160368 0x10>;
>>> +             interrupts = <0 58 0>;
>>> +             clocks = <&clock 21>;
>>> +             clock-names = "tmu_apbif";
>>> +     };
>>> +
>>> +Note: For multi-instance tmu each instance should have an alias correctly
>>> +numbered in "aliases" node.
>>> +
>>> +Example:
>>> +
>>> +aliases {
>>> +     tmuctrl0 = &tmuctrl_0;
>>> +     tmuctrl1 = &tmuctrl_1;
>>> +     tmuctrl2 = &tmuctrl_2;
>>> +};
>>> diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
>>> index f23f533..fce04f3 100644
>>> --- a/drivers/thermal/samsung/Kconfig
>>> +++ b/drivers/thermal/samsung/Kconfig
>>> @@ -19,10 +19,10 @@ config EXYNOS_THERMAL_CORE
>>>
>>>  config EXYNOS_THERMAL_DATA
>>>       bool "Temperature sensor congiguration data for EXYNOS series SOC"
>>> -     depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250)
>>> +     depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250 || SOC_EXYNOS5440)
>>>       depends on EXYNOS_THERMAL
>>>       help
>>>         If you say yes here you can enable TMU (Thermal Management Unit) on
>>> -       SAMSUNG EXYNOS 4210, 4412, 4414 and 5250 series of SoC. This option
>>> +       SAMSUNG EXYNOS 4210, 4412, 4414, 5250 and 5440 series of SoC. This option
>>>         enables/prepares the configuration, trip and cooling data for the TMU
>>>         driver.
>>> diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
>>> index b0dc63e..de43e18 100644
>>> --- a/drivers/thermal/samsung/exynos_thermal_common.c
>>> +++ b/drivers/thermal/samsung/exynos_thermal_common.c
>>> @@ -370,7 +370,7 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
>>>       th_zone->mode = THERMAL_DEVICE_ENABLED;
>>>       sensor_conf->pzone_data = th_zone;
>>>
>>> -     pr_info("Exynos: Kernel Thermal management registered\n");
>>> +     pr_info("Exynos: Thermal zone(%s) registered\n", sensor_conf->name);
>>>
>>>       return 0;
>>>
>>> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
>>> index c1a8c5f..72446c9 100644
>>> --- a/drivers/thermal/samsung/exynos_tmu.c
>>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>>> @@ -44,6 +44,7 @@
>>>   * @id: identifier of the one instance of the TMU controller.
>>>   * @pdata: pointer to the tmu platform/configuration data
>>>   * @base: base address of the single instance of the TMU controller.
>>> + * @base_common: base address of the common registers of the TMU controller.
>>>   * @irq: irq number of the TMU controller.
>>>   * @soc: id of the SOC type.
>>>   * @irq_work: pointer to the irq work structure.
>>> @@ -57,6 +58,7 @@ struct exynos_tmu_data {
>>>       int id;
>>>       struct exynos_tmu_platform_data *pdata;
>>>       void __iomem *base;
>>> +     void __iomem *base_common;
>>>       int irq;
>>>       enum soc_type soc;
>>>       struct work_struct irq_work;
>>> @@ -75,6 +77,9 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
>>>       struct exynos_tmu_platform_data *pdata = data->pdata;
>>>       int temp_code;
>>>
>>> +     if (pdata->cal_mode == HW_MODE)
>>> +             return temp;
>>> +
>>>       if (data->soc == SOC_ARCH_EXYNOS4210)
>>>               /* temp should range between 25 and 125 */
>>>               if (temp < 25 || temp > 125) {
>>> @@ -109,6 +114,9 @@ static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
>>>       struct exynos_tmu_platform_data *pdata = data->pdata;
>>>       int temp;
>>>
>>> +     if (pdata->cal_mode == HW_MODE)
>>> +             return temp_code;
>>> +
>>>       if (data->soc == SOC_ARCH_EXYNOS4210)
>>>               /* temp_code should range between 75 and 175 */
>>>               if (temp_code < 75 || temp_code > 175) {
>>> @@ -139,33 +147,63 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
>>>       struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>>>       struct exynos_tmu_platform_data *pdata = data->pdata;
>>>       struct exynos_tmu_registers *reg = pdata->registers;
>>> -     unsigned int status, trim_info, con;
>>> +     unsigned int status, trim_info = 0, con;
>>>       unsigned int rising_threshold = 0, falling_threshold = 0;
>>>       int ret = 0, threshold_code, i, trigger_levs = 0;
>>>
>>>       mutex_lock(&data->lock);
>>>       clk_enable(data->clk);
>>>
>>> -     status = readb(data->base + reg->tmu_status);
>>> -     if (!status) {
>>> -             ret = -EBUSY;
>>> -             goto out;
>>> +     if (TMU_SUPPORTS(pdata, READY_STATUS)) {
>>> +             status = readb(data->base + reg->tmu_status);
>>> +             if (!status) {
>>> +                     ret = -EBUSY;
>>> +                     goto out;
>>> +             }
>>>       }
>>>
>>>       if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
>>>               __raw_writel(1, data->base + reg->triminfo_ctrl);
>>>
>>> +     if (pdata->cal_mode == HW_MODE)
>>> +             goto skip_calib_data;
>>> +
>>>       /* Save trimming info in order to perform calibration */
>>> -     trim_info = readl(data->base + reg->triminfo_data);
>>> +     if (data->soc == SOC_ARCH_EXYNOS5440) {
>>> +             /*
>>> +              * For exynos5440 soc triminfo value is swapped between TMU0 and
>>> +              * TMU2, so the below logic is needed.
>>> +              */
>>> +             switch (data->id) {
>>> +             case 0:
>>> +                     trim_info = readl(data->base +
>>> +                     EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
>>> +                     break;
>>> +             case 1:
>>> +                     trim_info = readl(data->base + reg->triminfo_data);
>>> +                     break;
>>> +             case 2:
>>> +                     trim_info = readl(data->base -
>>> +                     EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
>>> +             }
>>> +     } else {
>>> +             trim_info = readl(data->base + reg->triminfo_data);
>>> +     }
>>>       data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
>>>       data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
>>>                               EXYNOS_TMU_TEMP_MASK);
>>>
>>> -     if ((pdata->min_efuse_value > data->temp_error1) ||
>>> -                     (data->temp_error1 > pdata->max_efuse_value) ||
>>> -                     (data->temp_error2 != 0))
>>> -             data->temp_error1 = pdata->efuse_value;
>>> +     if (!data->temp_error1 ||
>>> +             (pdata->min_efuse_value > data->temp_error1) ||
>>> +             (data->temp_error1 > pdata->max_efuse_value))
>>> +             data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
>>> +
>>> +     if (!data->temp_error2)
>>> +             data->temp_error2 =
>>> +                     (pdata->efuse_value >> reg->triminfo_85_shift) &
>>> +                     EXYNOS_TMU_TEMP_MASK;
>>>
>>> +skip_calib_data:
>>>       /* Count trigger levels to be enabled */
>>>       for (i = 0; i < MAX_THRESHOLD_LEVS; i++)
>>>               if (pdata->trigger_levels[i])
>>> @@ -185,9 +223,10 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
>>>                       data->base + reg->threshold_th0 + i * 4);
>>>
>>>               writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
>>> -     } else if (data->soc == SOC_ARCH_EXYNOS) {
>>> +     } else if (data->soc == SOC_ARCH_EXYNOS ||
>>> +                     data->soc == SOC_ARCH_EXYNOS5440) {
>>>               /* Write temperature code for rising and falling threshold */
>>> -             for (i = 0; i < trigger_levs; i++) {
>>> +             for (i = 0; i < trigger_levs && i < 4 ; i++) {
>>>                       threshold_code = temp_to_code(data,
>>>                                               pdata->trigger_levels[i]);
>>>                       if (threshold_code < 0) {
>>> @@ -218,7 +257,29 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
>>>               writel((reg->inten_rise_mask << reg->inten_rise_shift) |
>>>                       (reg->inten_fall_mask << reg->inten_fall_shift),
>>>                               data->base + reg->tmu_intclear);
>>> +
>>> +             /* if 5th threshold limit is also present, use TH2 register */
>>> +             i = 4;
>>> +             if (pdata->trigger_levels[i]) {
>>> +                     threshold_code = temp_to_code(data,
>>> +                                             pdata->trigger_levels[i]);
>>> +                     if (threshold_code < 0) {
>>> +                             ret = threshold_code;
>>> +                             goto out;
>>> +                     }
>>> +                     rising_threshold = threshold_code << 24;
>>> +                     writel(rising_threshold,
>>> +                             data->base + reg->threshold_th2);
>>> +                     if (pdata->trigger_type[i] == HW_TRIP) {
>>> +                             con = readl(data->base + reg->tmu_ctrl);
>>> +                             con |= (1 << reg->therm_trip_en_shift);
>>> +                             writel(con, data->base + reg->tmu_ctrl);
>>> +                     }
>>> +             }
>>>       }
>>> +     /*Clear the PMIN in the common TMU register*/
>>> +     if (reg->tmu_pmin && !data->id)
>>> +             writel(0, data->base_common + reg->tmu_pmin);
>>>  out:
>>>       clk_disable(data->clk);
>>>       mutex_unlock(&data->lock);
>>> @@ -254,6 +315,11 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
>>>               con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
>>>       }
>>>
>>> +     if (pdata->cal_mode == HW_MODE) {
>>> +             con &= ~(reg->calib_mode_mask << reg->calib_mode_shift);
>>> +             con |= pdata->cal_type << reg->calib_mode_shift;
>>> +     }
>>> +
>>>       if (on) {
>>>               con |= (1 << reg->core_en_shift);
>>>               interrupt_en =
>>> @@ -317,9 +383,11 @@ static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
>>>       if (temp) {
>>>               temp /= MCELSIUS;
>>>
>>> -             val = (EXYNOS_EMUL_TIME << reg->emul_time_shift) |
>>> -                     (temp_to_code(data, temp)
>>> -                      << reg->emul_temp_shift) | EXYNOS_EMUL_ENABLE;
>>> +             if (data->soc == SOC_ARCH_EXYNOS && reg->emul_time_shift)
>>> +                     val |= (EXYNOS_EMUL_TIME << reg->emul_time_shift);
>>> +
>>> +             val |= (temp_to_code(data, temp) << reg->emul_temp_shift) |
>>> +                     EXYNOS_EMUL_ENABLE;
>>>       } else {
>>>               val &= ~EXYNOS_EMUL_ENABLE;
>>>       }
>>> @@ -343,7 +411,14 @@ static void exynos_tmu_work(struct work_struct *work)
>>>                       struct exynos_tmu_data, irq_work);
>>>       struct exynos_tmu_platform_data *pdata = data->pdata;
>>>       struct exynos_tmu_registers *reg = pdata->registers;
>>> -     unsigned int val_irq;
>>> +     unsigned int val_irq, val_type;
>>> +
>>> +     /* Find which sensor generated this interrupt */
>>> +     if (reg->tmu_irqstatus) {
>>> +             val_type = readl(data->base_common + reg->tmu_irqstatus);
>>> +             if (!((val_type >> data->id) & 0x1))
>>> +                     goto out;
>>> +     }
>>>
>>>       exynos_report_trigger(data->reg_conf);
>>>       mutex_lock(&data->lock);
>>> @@ -355,7 +430,7 @@ static void exynos_tmu_work(struct work_struct *work)
>>>
>>>       clk_disable(data->clk);
>>>       mutex_unlock(&data->lock);
>>> -
>>> +out:
>>>       enable_irq(data->irq);
>>>  }
>>>
>>> @@ -383,6 +458,10 @@ static const struct of_device_id exynos_tmu_match[] = {
>>>               .compatible = "samsung,exynos5250-tmu",
>>>               .data = (void *)EXYNOS5250_TMU_DRV_DATA,
>>>       },
>>> +     {
>>> +             .compatible = "samsung,exynos5440-tmu",
>>> +             .data = (void *)EXYNOS5440_TMU_DRV_DATA,
>>> +     },
>>>       {},
>>>  };
>>>  MODULE_DEVICE_TABLE(of, exynos_tmu_match);
>>> @@ -420,6 +499,7 @@ static inline struct  exynos_tmu_platform_data *exynos_get_driver_data(
>>>  static int exynos_map_dt_data(struct platform_device *pdev)
>>>  {
>>>       struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>>> +     struct exynos_tmu_platform_data *pdata = data->pdata;
>>>       struct resource res;
>>>
>>>       if (!data)
>>> @@ -436,7 +516,7 @@ static int exynos_map_dt_data(struct platform_device *pdev)
>>>       }
>>>
>>>       if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
>>> -             dev_err(&pdev->dev, "failed to get Resource\n");
>>> +             dev_err(&pdev->dev, "failed to get Resource 0\n");
>>>               return -ENODEV;
>>>       }
>>>
>>> @@ -445,6 +525,26 @@ static int exynos_map_dt_data(struct platform_device *pdev)
>>>               dev_err(&pdev->dev, "Failed to ioremap memory\n");
>>>               return -ENOMEM;
>>>       }
>>> +
>>> +     /*
>>> +      * Check if the TMU is multi instance type and then try to map the
>>> +      * memory of common registers.
>>> +      */
>>> +     if (!TMU_SUPPORTS(pdata, MULTI_INST))
>>> +             return 0;
>>> +
>>> +     if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
>>> +             dev_err(&pdev->dev, "failed to get Resource 1\n");
>>> +             return -ENODEV;
>>> +     }
>>> +
>>> +     data->base_common = devm_ioremap(&pdev->dev, res.start,
>>> +                                     resource_size(&res));
>>> +     if (!data->base) {
>>> +             dev_err(&pdev->dev, "Failed to ioremap memory\n");
>>> +             return -ENOMEM;
>>> +     }
>>> +
>>>       return 0;
>>>  }
>>>
>>> @@ -496,7 +596,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>>>               return ret;
>>>
>>>       if (pdata->type == SOC_ARCH_EXYNOS ||
>>> -                             pdata->type == SOC_ARCH_EXYNOS4210)
>>> +             pdata->type == SOC_ARCH_EXYNOS4210 ||
>>> +             pdata->type == SOC_ARCH_EXYNOS5440)
>>>               data->soc = pdata->type;
>>>       else {
>>>               ret = -EINVAL;
>>> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
>>> index de1c342..cc6b10e 100644
>>> --- a/drivers/thermal/samsung/exynos_tmu.h
>>> +++ b/drivers/thermal/samsung/exynos_tmu.h
>>> @@ -43,6 +43,7 @@ enum trigger_type {
>>>  enum soc_type {
>>>       SOC_ARCH_EXYNOS4210 = 1,
>>>       SOC_ARCH_EXYNOS,
>>> +     SOC_ARCH_EXYNOS5440,
>>>  };
>>>
>>>  /**
>>> @@ -61,6 +62,7 @@ enum soc_type {
>>>  #define TMU_SUPPORT_MULTI_INST                       BIT(1)
>>>  #define TMU_SUPPORT_TRIM_RELOAD                      BIT(2)
>>>  #define TMU_SUPPORT_FALLING_TRIP             BIT(3)
>>> +#define TMU_SUPPORT_READY_STATUS             BIT(4)
>>>
>>>  #define TMU_SUPPORTS(a, b)   (a->features & TMU_SUPPORT_ ## b)
>>>
>>> @@ -85,6 +87,8 @@ struct exynos_tmu_registers {
>>>       u32     therm_trip_en_shift;
>>>       u32     buf_slope_sel_shift;
>>>       u32     buf_slope_sel_mask;
>>> +     u32     calib_mode_shift;
>>> +     u32     calib_mode_mask;
>>>       u32     therm_trip_tq_en_shift;
>>>       u32     core_en_shift;
>>>
>>> @@ -137,6 +141,9 @@ struct exynos_tmu_registers {
>>>       u32     emul_temp_shift;
>>>       u32     emul_time_shift;
>>>       u32     emul_time_mask;
>>> +
>>> +     u32     tmu_irqstatus;
>>> +     u32     tmu_pmin;
>>>  };
>>>
>>>  /**
>>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
>>> index 8a587d4..25629e6 100644
>>> --- a/drivers/thermal/samsung/exynos_tmu_data.c
>>> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
>>> @@ -79,6 +79,7 @@ struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
>>>       .freq_tab_count = 2,
>>>       .type = SOC_ARCH_EXYNOS4210,
>>>       .registers = &exynos4210_tmu_registers,
>>> +     .features = (TMU_SUPPORT_READY_STATUS),
>>>  };
>>>  #endif
>>>
>>> @@ -155,6 +156,69 @@ struct exynos_tmu_platform_data const exynos5250_default_tmu_data = {
>>>       .type = SOC_ARCH_EXYNOS,
>>>       .registers = &exynos5250_tmu_registers,
>>>       .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD |
>>> -                     TMU_SUPPORT_FALLING_TRIP),
>>> +                     TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS),
>>> +};
>>> +#endif
>>> +
>>> +#if defined(CONFIG_SOC_EXYNOS5440)
>>> +static struct exynos_tmu_registers exynos5440_tmu_registers = {
>>> +     .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
>>> +     .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
>>> +     .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
>>> +     .tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
>>> +     .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
>>> +     .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
>>> +     .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
>>> +     .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
>>> +     .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
>>> +     .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
>>> +     .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
>>> +     .calib_mode_shift = EXYNOS_TMU_CALIB_MODE_SHIFT,
>>> +     .calib_mode_mask = EXYNOS_TMU_CALIB_MODE_MASK,
>>> +     .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
>>> +     .tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
>>> +     .tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
>>> +     .threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
>>> +     .threshold_th1 = EXYNOS5440_TMU_S0_7_TH1,
>>> +     .threshold_th2 = EXYNOS5440_TMU_S0_7_TH2,
>>> +     .tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
>>> +     .inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
>>> +     .inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
>>> +     .inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
>>> +     .inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT,
>>> +     .inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
>>> +     .inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
>>> +     .inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
>>> +     .inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT,
>>> +     .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
>>> +     .tmu_evten = EXYNOS5440_TMU_S0_7_EVTEN,
>>> +     .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
>>> +     .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
>>> +     .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
>>> +     .emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
>>> +     .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
>>> +     .tmu_pmin = EXYNOS5440_TMU_PMIN,
>>> +};
>>> +struct exynos_tmu_platform_data const exynos5440_default_tmu_data = {
>>> +     .trigger_levels[0] = 100,
>>> +     .trigger_levels[4] = 105,
>>> +     .trigger_enable[0] = 1,
>>> +     .trigger_type[0] = 1,
>>> +     .trigger_type[4] = 2,
>>> +     .gain = 5,
>>> +     .reference_voltage = 16,
>>> +     .noise_cancel_mode = 4,
>>> +     .cal_type = TYPE_TWO_POINT_TRIMMING,
>>> +     .cal_mode = 0,
>>> +     .efuse_value = 0x5b2d,
>>> +     .min_efuse_value = 16,
>>> +     .max_efuse_value = 76,
>>> +     .first_point_trim = 25,
>>> +     .second_point_trim = 70,
>>> +     .default_temp_offset = 25,
>>> +     .type = SOC_ARCH_EXYNOS5440,
>>> +     .registers = &exynos5440_tmu_registers,
>>> +     .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP |
>>> +                     TMU_SUPPORT_MULTI_INST),
>>>  };
>>>  #endif
>>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
>>> index 0560413..c409f3a 100644
>>> --- a/drivers/thermal/samsung/exynos_tmu_data.h
>>> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
>>> @@ -75,6 +75,8 @@
>>>  #define EXYNOS_TMU_TRIP_MODE_SHIFT   13
>>>  #define EXYNOS_TMU_TRIP_MODE_MASK    0x7
>>>  #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT       12
>>> +#define EXYNOS_TMU_CALIB_MODE_SHIFT  4
>>> +#define EXYNOS_TMU_CALIB_MODE_MASK   0x3
>>>
>>>  #define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
>>>  #define EXYNOS_TMU_INTEN_RISE1_SHIFT 4
>>> @@ -91,6 +93,37 @@
>>>  #define EXYNOS_EMUL_DATA_MASK        0xFF
>>>  #define EXYNOS_EMUL_ENABLE   0x1
>>>
>>> +/*exynos5440 specific registers*/
>>> +#define EXYNOS5440_TMU_S0_7_TRIM             0x000
>>> +#define EXYNOS5440_TMU_S0_7_CTRL             0x020
>>> +#define EXYNOS5440_TMU_S0_7_DEBUG            0x040
>>> +#define EXYNOS5440_TMU_S0_7_STATUS           0x060
>>> +#define EXYNOS5440_TMU_S0_7_TEMP             0x0f0
>>> +#define EXYNOS5440_TMU_S0_7_TH0                      0x110
>>> +#define EXYNOS5440_TMU_S0_7_TH1                      0x130
>>> +#define EXYNOS5440_TMU_S0_7_TH2                      0x150
>>> +#define EXYNOS5440_TMU_S0_7_EVTEN            0x1F0
>>> +#define EXYNOS5440_TMU_S0_7_IRQEN            0x210
>>> +#define EXYNOS5440_TMU_S0_7_IRQ                      0x230
>>> +/* exynos5440 common registers */
>>> +#define EXYNOS5440_TMU_IRQ_STATUS            0x000
>>> +#define EXYNOS5440_TMU_PMIN                  0x004
>>> +#define EXYNOS5440_TMU_TEMP                  0x008
>>> +
>>> +#define EXYNOS5440_EFUSE_SWAP_OFFSET         8
>>> +#define EXYNOS5440_TMU_RISE_INT_MASK         0xf
>>> +#define EXYNOS5440_TMU_RISE_INT_SHIFT                0
>>> +#define EXYNOS5440_TMU_FALL_INT_MASK         0xf
>>> +#define EXYNOS5440_TMU_FALL_INT_SHIFT                4
>>> +#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT     0
>>> +#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT     1
>>> +#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT     2
>>> +#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT     3
>>> +#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT     4
>>> +#define EXYNOS5440_TMU_INTEN_FALL1_SHIFT     5
>>> +#define EXYNOS5440_TMU_INTEN_FALL2_SHIFT     6
>>> +#define EXYNOS5440_TMU_INTEN_FALL3_SHIFT     7
>>> +
>>>  #if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_EXYNOS_THERMAL_DATA)
>>>  extern struct exynos_tmu_platform_data const exynos4210_default_tmu_data;
>>>  #define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
>>> @@ -106,4 +139,11 @@ extern struct exynos_tmu_platform_data const exynos5250_default_tmu_data;
>>>  #define EXYNOS5250_TMU_DRV_DATA (NULL)
>>>  #endif
>>>
>>> +#if defined(CONFIG_SOC_EXYNOS5440) && defined(CONFIG_EXYNOS_THERMAL_DATA)
>>> +extern struct exynos_tmu_platform_data const exynos5440_default_tmu_data;
>>> +#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data)
>>> +#else
>>> +#define EXYNOS5440_TMU_DRV_DATA (NULL)
>>> +#endif
>>> +
>>>  #endif /*_LINUX_EXYNOS_TMU_DATA_H*/
>>>
>>
>>
> 
> 


Attachment: signature.asc
Description: OpenPGP digital signature


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux