Re: [PATCH V3 15/21] thermal: exynos: Add support to handle many instances of TMU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 9, 2013 at 8:23 PM, Eduardo Valentin
<eduardo.valentin@xxxxxx> wrote:
> On 07-05-2013 09:01, Amit Daniel Kachhap wrote:
>> This patch adds support to handle multiple instances of the TMU controllers.
>> This is done by removing the static structure to register with the core thermal
>> and creating it dynamically for each instance of the TMU controller. The
>> interrupt is made shared type to handle interrupts for all the TMU. Also
>> the identifier of the TMU controller is extracted from device tree alias.
>>
>> Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
>> Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
>> ---
>>  drivers/thermal/samsung/exynos_tmu.c |  125 +++++++++++++++++++++++-----------
>>  1 files changed, 84 insertions(+), 41 deletions(-)
>>
>> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
>> index bdf40ef..94d6e8e 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.c
>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>> @@ -29,6 +29,8 @@
>>  #include <linux/module.h>
>>  #include <linux/mutex.h>
>>  #include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>>  #include <linux/platform_device.h>
>>  #include <linux/slab.h>
>>  #include <linux/workqueue.h>
>> @@ -36,9 +38,24 @@
>>  #include "exynos_tmu.h"
>>  #include "exynos_tmu_data.h"
>>
>> +/**
>> + * struct exynos_tmu_data : A structure to hold the private data of the TMU
>> +     driver
>> + * @id: identifier of the one instance of the TMU controller.
>> + * @pdata: pointer to the tmu platform/configuration data
>> + * @base: base address of the single instance of the TMU controller.
>> + * @irq: irq number of the TMU controller.
>> + * @soc: id of the SOC type.
>> + * @irq_work: pointer to the irq work structure.
>> + * @lock: lock to implement synchronization.
>> + * @clk: pointer to the clock structure.
>> + * @temp_error1: fused value of the first point trim.
>> + * @temp_error2: fused value of the second point trim.
>> + * @reg_conf: pointer to structure to register with core thermal.
>> + */
>>  struct exynos_tmu_data {
>> +     int id;
>>       struct exynos_tmu_platform_data *pdata;
>> -     struct resource *mem;
>>       void __iomem *base;
>>       int irq;
>>       enum soc_type soc;
>> @@ -46,6 +63,7 @@ struct exynos_tmu_data {
>>       struct mutex lock;
>>       struct clk *clk;
>>       u8 temp_error1, temp_error2;
>> +     struct thermal_sensor_conf *reg_conf;
>>  };
>>
>>  /*
>> @@ -319,12 +337,6 @@ static int exynos_tmu_set_emulation(void *drv_data,      unsigned long temp)
>>       { return -EINVAL; }
>>  #endif/*CONFIG_THERMAL_EMULATION*/
>>
>> -static struct thermal_sensor_conf exynos_sensor_conf = {
>> -     .name                   = "exynos-therm",
>> -     .read_temperature       = (int (*)(void *))exynos_tmu_read,
>> -     .write_emul_temp        = exynos_tmu_set_emulation,
>> -};
>> -
>>  static void exynos_tmu_work(struct work_struct *work)
>>  {
>>       struct exynos_tmu_data *data = container_of(work,
>> @@ -333,7 +345,7 @@ static void exynos_tmu_work(struct work_struct *work)
>>       struct exynos_tmu_registers *reg = pdata->registers;
>>       unsigned int val_irq;
>>
>> -     exynos_report_trigger(&exynos_sensor_conf);
>> +     exynos_report_trigger(data->reg_conf);
>>       mutex_lock(&data->lock);
>>       clk_enable(data->clk);
>>
>> @@ -405,10 +417,42 @@ static inline struct  exynos_tmu_platform_data *exynos_get_driver_data(
>>                       platform_get_device_id(pdev)->driver_data;
>>  }
>>
>> +static int exynos_map_dt_data(struct platform_device *pdev)
>> +{
>> +     struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>> +     struct resource res;
>> +
>> +     if (!data)
>> +             return -ENODEV;
>> +
>> +     data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
>> +     if (data->id < 0)
>> +             data->id = 0;
>> +
>> +     data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
>> +     if (data->irq <= 0) {
>> +             dev_err(&pdev->dev, "failed to get IRQ\n");
>> +             return -ENODEV;
>> +     }
>> +
>> +     if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
>> +             dev_err(&pdev->dev, "failed to get Resource\n");
>> +             return -ENODEV;
>> +     }
>> +
>> +     data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
>> +     if (!data->base) {
>> +             dev_err(&pdev->dev, "Failed to ioremap memory\n");
>> +             return -ENOMEM;
>
> looks like the statement below fits better here:
>                 return ERR_PTR(-EADDRNOTAVAIL);

Ok.
>
>> +     }
>
> blank line?
Ok.
>
>> +     return 0;
>> +}
>> +
>>  static int exynos_tmu_probe(struct platform_device *pdev)
>>  {
>>       struct exynos_tmu_data *data;
>>       struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data;
>> +     struct thermal_sensor_conf *sensor_conf;
>>       int ret, i;
>>
>>       if (!pdata)
>> @@ -425,26 +469,17 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>>               return -ENOMEM;
>>       }
>>
>> -     data->irq = platform_get_irq(pdev, 0);
>> -     if (data->irq < 0) {
>> -             dev_err(&pdev->dev, "Failed to get platform irq\n");
>> -             return data->irq;
>> -     }
>> -
>> -     INIT_WORK(&data->irq_work, exynos_tmu_work);
>> -
>> -     data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> -     if (!data->mem) {
>> -             dev_err(&pdev->dev, "Failed to get platform resource\n");
>> -             return -ENOENT;
>> -     }
>> +     data->pdata = pdata;
>> +     platform_set_drvdata(pdev, data);
>> +     mutex_init(&data->lock);
>>
>> -     data->base = devm_ioremap_resource(&pdev->dev, data->mem);
>> -     if (IS_ERR(data->base))
>> -             return PTR_ERR(data->base);
>> +     ret = exynos_map_dt_data(pdev);
>> +     if (ret)
>> +             return ret;
>>
>> +     INIT_WORK(&data->irq_work, exynos_tmu_work);
>>       ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
>> -             IRQF_TRIGGER_RISING, "exynos-tmu", data);
>> +             IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
>>       if (ret) {
>>               dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
>>               return ret;
>> @@ -469,10 +504,6 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>>               goto err_clk;
>>       }
>>
>> -     data->pdata = pdata;
>> -     platform_set_drvdata(pdev, data);
>> -     mutex_init(&data->lock);
>> -
>>       ret = exynos_tmu_initialize(pdev);
>>       if (ret) {
>>               dev_err(&pdev->dev, "Failed to initialize TMU\n");
>> @@ -481,28 +512,40 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>>
>>       exynos_tmu_control(pdev, true);
>>
>> -     /* Register the sensor with thermal management interface */
>> -     (&exynos_sensor_conf)->driver_data = data;
>> -     exynos_sensor_conf.trip_data.trip_count = pdata->trigger_enable[0] +
>> +     /* Allocate a structure to register with the exynos core thermal */
>> +     sensor_conf = devm_kzalloc(&pdev->dev,
>> +                             sizeof(struct thermal_sensor_conf), GFP_KERNEL);
>> +     if (!sensor_conf) {
>> +             dev_err(&pdev->dev, "Failed to allocate registration struct\n");
>> +             ret = -ENOMEM;
>> +             goto err_clk;
>> +     }
>> +     data->reg_conf = sensor_conf;
>> +     sprintf(sensor_conf->name, "therm_zone%d", data->id);
>> +     sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read;
>> +     sensor_conf->write_emul_temp =
>> +             (int (*)(void *, unsigned long))exynos_tmu_set_emulation;
>> +     sensor_conf->driver_data = data;
>> +     sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] +
>>                       pdata->trigger_enable[1] + pdata->trigger_enable[2]+
>>                       pdata->trigger_enable[3];
>>
>> -     for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++)
>> -             exynos_sensor_conf.trip_data.trip_val[i] =
>> +     for (i = 0; i < sensor_conf->trip_data.trip_count; i++)
>> +             sensor_conf->trip_data.trip_val[i] =
>>                       pdata->threshold + pdata->trigger_levels[i];
>>
>> -     exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling;
>> +     sensor_conf->trip_data.trigger_falling = pdata->threshold_falling;
>>
>> -     exynos_sensor_conf.cooling_data.freq_clip_count =
>> -                                             pdata->freq_tab_count;
>> +     sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count;
>>       for (i = 0; i < pdata->freq_tab_count; i++) {
>> -             exynos_sensor_conf.cooling_data.freq_data[i].freq_clip_max =
>> +             sensor_conf->cooling_data.freq_data[i].freq_clip_max =
>>                                       pdata->freq_tab[i].freq_clip_max;
>> -             exynos_sensor_conf.cooling_data.freq_data[i].temp_level =
>> +             sensor_conf->cooling_data.freq_data[i].temp_level =
>>                                       pdata->freq_tab[i].temp_level;
>>       }
>>
>> -     ret = exynos_register_thermal(&exynos_sensor_conf);
>> +     /* Register the sensor with thermal management interface */
>> +     ret = exynos_register_thermal(sensor_conf);
>>       if (ret) {
>>               dev_err(&pdev->dev, "Failed to register thermal interface\n");
>>               goto err_clk;
>> @@ -521,7 +564,7 @@ static int exynos_tmu_remove(struct platform_device *pdev)
>>
>>       exynos_tmu_control(pdev, false);
>>
>> -     exynos_unregister_thermal(&exynos_sensor_conf);
>> +     exynos_unregister_thermal(data->reg_conf);
>>
>>       clk_unprepare(data->clk);
>>
>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux