TMU probe function now checks for a device tree defined regulator. For compatibility reasons it is allowed to probe driver even without this regulator defined. Signed-off-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx> --- This patch is repost of the patch posted by Lukasz Majewski (https://patchwork.kernel.org/patch/2488211/). I have rebased this patch on top of my TMU re-structured patch series (http://lwn.net/Articles/548634/). Although I thought of handling regulator as one type of feature (newly added) but could not do so as regulator is a board/platform property and not SOC property so leaving the device tree to define and handle it. .../devicetree/bindings/thermal/exynos-thermal.txt | 4 ++++ drivers/thermal/samsung/exynos_tmu.c | 17 +++++++++++++++++ 2 files changed, 21 insertions(+), 0 deletions(-) diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index 970eeba..ff62f7a 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -14,6 +14,9 @@ - interrupts : Should contain interrupt for thermal system - clocks : The main clock for TMU device - clock-names : Thermal system clock name +- vtmu-supply: This entry is optional and provides the regulator node supplying + voltage to TMU. If needed this entry can be placed inside + board/platform specific dts file. Example 1): @@ -25,6 +28,7 @@ Example 1): clocks = <&clock 383>; clock-names = "tmu_apbif"; status = "disabled"; + vtmu-supply = <&tmu_regulator_node>; }; Example 2): diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 72446c9..45b50c1 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -32,6 +32,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/workqueue.h> #include "exynos_thermal_common.h" @@ -52,6 +53,7 @@ * @clk: pointer to the clock structure. * @temp_error1: fused value of the first point trim. * @temp_error2: fused value of the second point trim. + * @regulator: pointer to the TMU regulator structure. * @reg_conf: pointer to structure to register with core thermal. */ struct exynos_tmu_data { @@ -65,6 +67,7 @@ struct exynos_tmu_data { struct mutex lock; struct clk *clk; u8 temp_error1, temp_error2; + struct regulator *regulator; struct thermal_sensor_conf *reg_conf; }; @@ -501,10 +504,21 @@ static int exynos_map_dt_data(struct platform_device *pdev) struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct exynos_tmu_platform_data *pdata = data->pdata; struct resource res; + int ret; if (!data) return -ENODEV; + /* Try enabling the regulator if found */ + data->regulator = devm_regulator_get(&pdev->dev, "vtmu"); + if (!IS_ERR(data->regulator)) { + ret = regulator_enable(data->regulator); + if (ret) { + dev_err(&pdev->dev, "failed to enable vtmu\n"); + return ret; + } + } + data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl"); if (data->id < 0) data->id = 0; @@ -669,6 +683,9 @@ static int exynos_tmu_remove(struct platform_device *pdev) clk_unprepare(data->clk); + if (data->regulator) + regulator_disable(data->regulator); + platform_set_drvdata(pdev, NULL); return 0; -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |