Tushar,
Thanks for tracking this down.
On Mon, Apr 22, 2013 at 11:31 PM, Tushar Behera
<tushar.behera@xxxxxxxxxx> wrote:
> commit 688f7d8c9fef ("clk: exynos5250: Fix divider values for
> sclk_mmc{0,1,2,3}") incorrectly sets the divider for sclk_mmc{0,1,2,3}
> to fix the wrong clock value. Though this fixed issue with Arndale,
> it created regressions for other boards like Snow.
>
> On Exynos5250, sclk_mmc<n> is generated like below (as per the clock
> names in drivers/clk/samsung/clk-exynos5250.c)
>
> mout_group1_p ==> mout_mmc<n> ==>
> div_mmc<n> ==> div_mmc_pre<n> => sclk_mmc<n>
>
> Earlier div_mmc<n> was set as the parent for sclk_mmc<n>, hence
> div_mmc_pre<n> was not getting referred in kernel code and depending
> on its value set during preboot, sclk_mmc<n> value was different for
> various boards.
>
> Setting the correct clock generation path should fix the issues
> reported in above referenced commit. The changes committed during the
> earlier patch has also been reverted here.
>
> Signed-off-by: Tushar Behera <tushar.behera@xxxxxxxxxx>
> CC: Doug Anderson <dianders@xxxxxxxxxxxx>
> ---
> Doug,
>
> Would you please test whether this patch works for Snow?
Yup, it works for me. I did the basic testing of installing to eMMC
with this and then booting from eMMC. I saw no errors in the console.
I glanced over the patch and it looks reasonable to me. :)
Reported-by: Doug Anderson <dianders@xxxxxxxxxxxx>
Tested-by: Doug Anderson <dianders@xxxxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
