Re: [PATCH 2/4] USB: dwc3: Adjust runtime pm the dwc3 driver to allow runtime suspend

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Felipe,


On Mon, Jan 28, 2013 at 5:15 PM, Felipe Balbi <balbi@xxxxxx> wrote:
> On Mon, Jan 28, 2013 at 05:12:26PM +0530, Vivek Gautam wrote:
>> The current code in the dwc3 probe effectively disables runtime pm
>> from ever working because it calls a get() that was never put() until
>> device removal.  Change the runtime pm code to match the standard
>> formula and allow runtime pm to function.
>>
>> Note that this doesn't enable full runtime pm on the DWC3 device in
>> that the port isn't put into a lower power mode when not used.
>> However it does allow users of dwc3 (like dwc3-exynos) to do some
>> amount of runtime power management.
>>
>> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
>> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
>> ---
>>  drivers/usb/dwc3/core.c |    4 +++-
>>  1 files changed, 3 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index 3a4004a..59c2494 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -453,6 +453,7 @@ static int dwc3_probe(struct platform_device *pdev)
>>       if (of_get_property(node, "tx-fifo-resize", NULL))
>>               dwc->needs_fifo_resize = true;
>>
>> +     pm_runtime_set_active(dev);
>
> this usage of pm_runtime_set_active() actually makes me a bit scared. At
> least OMAP starts with the device switched off, so this will probably
> break OMAP at least.

I am fine with dropping pm_runtime_set_active(), actually thought
to put device in active state so that as and when system finds it idle,
force into suspend state.

I fact should i drop  pm_runtime_set_active() calls from other places too
(xhci-plat, dwc3-exynos, and samsung-usb3 phy) and call get_sync() alongwith
enable() ?

> OTOH, calling ->runtime_resume() during probe()
> might not make that much sense after all, but the way OMAP is
> implemented, we won't get clocks turned on if this ->runtime_resume()
> method isn't called.
>
> /me starts to wonder whether OMAP implementation is flakey and what
> should be done here...
>



-- 
Thanks & Regards
Vivek
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux