The current code in the dwc3 probe effectively disables runtime pm from ever working because it calls a get() that was never put() until device removal. Change the runtime pm code to match the standard formula and allow runtime pm to function. Note that this doesn't enable full runtime pm on the DWC3 device in that the port isn't put into a lower power mode when not used. However it does allow users of dwc3 (like dwc3-exynos) to do some amount of runtime power management. Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx> --- drivers/usb/dwc3/core.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 3a4004a..59c2494 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -453,6 +453,7 @@ static int dwc3_probe(struct platform_device *pdev) if (of_get_property(node, "tx-fifo-resize", NULL)) dwc->needs_fifo_resize = true; + pm_runtime_set_active(dev); pm_runtime_enable(dev); pm_runtime_get_sync(dev); pm_runtime_forbid(dev); @@ -517,6 +518,7 @@ static int dwc3_probe(struct platform_device *pdev) goto err2; } + pm_runtime_put(dev); pm_runtime_allow(dev); return 0; @@ -543,6 +545,7 @@ err1: err0: dwc3_free_event_buffers(dwc); + pm_runtime_disable(&pdev->dev); return ret; } @@ -554,7 +557,6 @@ static int dwc3_remove(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); dwc3_debugfs_exit(dwc); -- 1.7.6.5 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |