S3C2443 CPU has a problem with incorrect reading from EXTINTn
registers. So s3c_irqext_type function wrongly modifies them.
So add special function for s3c2443, to handle this case.
Signed-off-by: Alexander Varnin <fenixk19@xxxxxxx>
---
arch/arm/mach-s3c24xx/s3c2443.c | 8 ++++
arch/arm/plat-s3c24xx/irq.c | 89 +++++++++++++++++++++++++++++++++++++++
2 files changed, 97 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c
index ab648ad..99eef31 100644
--- a/arch/arm/mach-s3c24xx/s3c2443.c
+++ b/arch/arm/mach-s3c24xx/s3c2443.c
@@ -67,8 +67,11 @@ void s3c2443_restart(char mode, const char *cmd)
__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
}
+extern int s3c2443_irqext_type(struct irq_data *data, unsigned int type);
+
int __init s3c2443_init(void)
{
+ struct irq_chip * chip;
printk("S3C2443: Initialising architecture\n");
s3c_nand_setname("s3c2412-nand");
@@ -81,6 +84,11 @@ int __init s3c2443_init(void)
s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
+ chip = irq_get_chip(IRQ_EINT0);
+ chip->irq_set_type=s3c2443_irqext_type;
+ chip = irq_get_chip(IRQ_EINT4);
+ chip->irq_set_type=s3c2443_irqext_type;
+
return device_register(&s3c2443_dev);
}
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index fe57bbb..9c815f3 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -224,7 +224,96 @@ s3c_irqext_type(struct irq_data *data, unsigned int type)
return 0;
}
+#if defined(CONFIG_CPU_S3C2443)
+int
+s3c2443_irqext_type(struct irq_data *data, unsigned int type)
+{
+ int i;
+ int fixed;
+ void __iomem *extint_reg;
+ void __iomem *gpcon_reg;
+ unsigned long gpcon_offset, extint_offset;
+ unsigned long newvalue = 0, value;
+
+ if ((data->irq >= IRQ_EINT0) && (data->irq <= IRQ_EINT3)) {
+ gpcon_reg = S3C2410_GPFCON;
+ extint_reg = S3C24XX_EXTINT0;
+ gpcon_offset = (data->irq - IRQ_EINT0) * 2;
+ extint_offset = (data->irq - IRQ_EINT0) * 4;
+ } else if ((data->irq >= IRQ_EINT4) && (data->irq <= IRQ_EINT7)) {
+ gpcon_reg = S3C2410_GPFCON;
+ extint_reg = S3C24XX_EXTINT0;
+ gpcon_offset = (data->irq - (EXTINT_OFF)) * 2;
+ extint_offset = (data->irq - (EXTINT_OFF)) * 4;
+ } else if ((data->irq >= IRQ_EINT8) && (data->irq <= IRQ_EINT15)) {
+ gpcon_reg = S3C2410_GPGCON;
+ extint_reg = S3C24XX_EXTINT1;
+ gpcon_offset = (data->irq - IRQ_EINT8) * 2;
+ extint_offset = (data->irq - IRQ_EINT8) * 4;
+ } else if ((data->irq >= IRQ_EINT16) && (data->irq <= IRQ_EINT23)) {
+ gpcon_reg = S3C2410_GPGCON;
+ extint_reg = S3C24XX_EXTINT2;
+ gpcon_offset = (data->irq - IRQ_EINT8) * 2;
+ extint_offset = (data->irq - IRQ_EINT16) * 4;
+ } else {
+ return -1;
+ }
+ /* Set the GPIO to external interrupt mode */
+ value = __raw_readl(gpcon_reg);
+ value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
+ __raw_writel(value, gpcon_reg);
+
+ /* Set the external interrupt to pointed trigger type */
+ switch (type)
+ {
+ case IRQ_TYPE_NONE:
+ printk(KERN_WARNING "No edge setting!\n");
+ break;
+
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S3C2410_EXTINT_RISEEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S3C2410_EXTINT_FALLEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S3C2410_EXTINT_BOTHEDGE;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S3C2410_EXTINT_LOWLEV;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S3C2410_EXTINT_HILEV;
+ break;
+
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -1;
+ }
+
+ value = __raw_readl(extint_reg);
+ //Hack for 2443 error workaround
+ fixed = 0;
+ if(extint_reg == S3C24XX_EXTINT1 || extint_reg == S3C24XX_EXTINT2)
+ for(i=0; i<7;i++)
+ fixed |= (((value >> ((7-i)*4+1)) & 7) | ((value >> ((7-i)*4-3)) & 8)) << i*4;
+ else
+ for(i=0; i<7;i++)
+ fixed |= ( (value >> (7-i)*4) & 0xf ) << i*4;
+ fixed |= (((value>>1) & 7) | ((value<<3) & 8)) << 27;
+ value = fixed;
+
+ value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
+ __raw_writel(value, extint_reg);
+
+ return 0;
+}
+#endif //defined(CONFIG_CPU_S3C2443)
static struct irq_chip s3c_irqext_chip = {
.name = "s3c-ext",
.irq_mask = s3c_irqext_mask,
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
