On Wed, Jun 20, 2012 at 01:28:36PM +0900, Kukjin Kim wrote:
> Kukjin Kim wrote:
> >
> > Kyoungil Kim wrote:
> > >
> > > Kyoungil Kim wrote:
> > >
> > > I missed following.
> > >
> > > Russell King suggested:
> > >
> > > As I said, drivers have no business interpreting anything but
> IS_ERR(clk)
> > > as being an error. They should not make any other
> > > assumptions.
> > >
> > > Suggested-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
> > >
> > > > Signed-off-by: Kyoungil Kim <ki0351.kim@xxxxxxxxxxx>
> > > > ---
> > > > drivers/tty/serial/samsung.c | 21 ++++++++++++---------
> > > > 1 files changed, 12 insertions(+), 9 deletions(-)
> > > >
> > > > diff --git a/drivers/tty/serial/samsung.c
> > b/drivers/tty/serial/samsung.c
> > > > index d8b0aee..5668538 100644
> > > > --- a/drivers/tty/serial/samsung.c
> > > > +++ b/drivers/tty/serial/samsung.c
> > > > @@ -529,7 +529,7 @@ static void s3c24xx_serial_pm(struct uart_port
> > *port,
> > > unsigned int level,
> > > >
> > > > switch (level) {
> > > > case 3:
> > > > - if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
> > > > + if (!IS_ERR(ourport->baudclk))
> > > > clk_disable(ourport->baudclk);
> > > >
> > > > clk_disable(ourport->clk);
> > > > @@ -538,7 +538,7 @@ static void s3c24xx_serial_pm(struct uart_port
> > *port,
> > > unsigned int level,
> > > > case 0:
> > > > clk_enable(ourport->clk);
> > > >
> > > > - if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
> > > > + if (!IS_ERR(ourport->baudclk))
> > > > clk_enable(ourport->baudclk);
> > > >
> > > > break;
> > > > @@ -604,7 +604,6 @@ static unsigned int s3c24xx_serial_getclk(struct
> > > s3c24xx_uart_port *ourport,
> > > > char clkname[MAX_CLK_NAME_LENGTH];
> > > > int calc_deviation, deviation = (1 << 30) - 1;
> > > >
> > > > - *best_clk = NULL;
> > > > clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
> > > > ourport->info->def_clk_sel;
> > > > for (cnt = 0; cnt < info->num_clks; cnt++) {
> > > > @@ -613,7 +612,7 @@ static unsigned int s3c24xx_serial_getclk(struct
> > > s3c24xx_uart_port *ourport,
> > > >
> > > > sprintf(clkname, "clk_uart_baud%d", cnt);
> > > > clk = clk_get(ourport->port.dev, clkname);
> > > > - if (IS_ERR_OR_NULL(clk))
> > > > + if (IS_ERR(clk))
> > > > continue;
> > > >
> > > > rate = clk_get_rate(clk);
> > > > @@ -684,7 +683,7 @@ static void s3c24xx_serial_set_termios(struct
> > > uart_port *port,
> > > > {
> > > > struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
> > > > struct s3c24xx_uart_port *ourport = to_ourport(port);
> > > > - struct clk *clk = NULL;
> > > > + struct clk *clk = ERR_PTR(-EINVAL);
> > > > unsigned long flags;
> > > > unsigned int baud, quot, clk_sel = 0;
> > > > unsigned int ulcon;
> > > > @@ -705,7 +704,7 @@ static void s3c24xx_serial_set_termios(struct
> > > uart_port *port,
> > > > quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
> > > > if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
> > > > quot = port->custom_divisor;
> > > > - if (!clk)
> > > > + if (IS_ERR(clk))
> > > > return;
> > > >
> > > > /* check to see if we need to change clock source */
> > > > @@ -713,9 +712,9 @@ static void s3c24xx_serial_set_termios(struct
> > > uart_port *port,
> > > > if (ourport->baudclk != clk) {
> > > > s3c24xx_serial_setsource(port, clk_sel);
> > > >
> > > > - if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
> > > > + if (!IS_ERR(ourport->baudclk)) {
> > > > clk_disable(ourport->baudclk);
> > > > - ourport->baudclk = NULL;
> > > > + ourport->baudclk = ERR_PTR(-EINVAL);
> > > > }
> > > >
> > > > clk_enable(clk);
> > > > @@ -1160,6 +1159,9 @@ static ssize_t s3c24xx_serial_show_clksrc(struct
> > > device *dev,
> > > > struct uart_port *port = s3c24xx_dev_to_port(dev);
> > > > struct s3c24xx_uart_port *ourport = to_ourport(port);
> > > >
> > > > + if (IS_ERR(ourport->baudclk))
> > > > + return -EINVAL;
> > > > +
> > > > return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name);
> > > > }
> > > >
> > > > @@ -1200,6 +1202,7 @@ static int s3c24xx_serial_probe(struct
> > > platform_device *pdev)
> > > > return -ENODEV;
> > > > }
> > > >
> > > > + ourport->baudclk = ERR_PTR(-EINVAL);
> > > > ourport->info = ourport->drv_data->info;
> > > > ourport->cfg = (pdev->dev.platform_data) ?
> > > > (struct s3c2410_uartcfg *)pdev->dev.platform_data :
> > > > @@ -1387,7 +1390,7 @@ s3c24xx_serial_get_options(struct uart_port
> > *port,
> > > int *baud,
> > > > sprintf(clk_name, "clk_uart_baud%d", clk_sel);
> > > >
> > > > clk = clk_get(port->dev, clk_name);
> > > > - if (!IS_ERR(clk) && clk != NULL)
> > > > + if (!IS_ERR(clk))
> > > > rate = clk_get_rate(clk);
> > > > else
> > > > rate = 1;
> > > > --
> > > > 1.7.1
> >
> > Looks ok to me, will apply.
> > Thanks.
> >
> (Cc'ed Greg)
>
> I think, would be better if Greg could pick this up in his tree.
>
> Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
It's already there :)
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
