RE: [PATCH 1/2] serial: samsung: Remove NULL checking for baud clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Kukjin Kim wrote:
> 
> Kyoungil Kim wrote:
> >
> > Kyoungil Kim wrote:
> >
> > I missed following.
> >
> > Russell King suggested:
> >
> > As I said, drivers have no business interpreting anything but
IS_ERR(clk)
> > as being an error.  They should not make any other
> > assumptions.
> >
> > Suggested-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
> >
> > > Signed-off-by: Kyoungil Kim <ki0351.kim@xxxxxxxxxxx>
> > > ---
> > >  drivers/tty/serial/samsung.c |   21 ++++++++++++---------
> > >  1 files changed, 12 insertions(+), 9 deletions(-)
> > >
> > > diff --git a/drivers/tty/serial/samsung.c
> b/drivers/tty/serial/samsung.c
> > > index d8b0aee..5668538 100644
> > > --- a/drivers/tty/serial/samsung.c
> > > +++ b/drivers/tty/serial/samsung.c
> > > @@ -529,7 +529,7 @@ static void s3c24xx_serial_pm(struct uart_port
> *port,
> > unsigned int level,
> > >
> > >  	switch (level) {
> > >  	case 3:
> > > -		if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
> > > +		if (!IS_ERR(ourport->baudclk))
> > >  			clk_disable(ourport->baudclk);
> > >
> > >  		clk_disable(ourport->clk);
> > > @@ -538,7 +538,7 @@ static void s3c24xx_serial_pm(struct uart_port
> *port,
> > unsigned int level,
> > >  	case 0:
> > >  		clk_enable(ourport->clk);
> > >
> > > -		if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
> > > +		if (!IS_ERR(ourport->baudclk))
> > >  			clk_enable(ourport->baudclk);
> > >
> > >  		break;
> > > @@ -604,7 +604,6 @@ static unsigned int s3c24xx_serial_getclk(struct
> > s3c24xx_uart_port *ourport,
> > >  	char clkname[MAX_CLK_NAME_LENGTH];
> > >  	int calc_deviation, deviation = (1 << 30) - 1;
> > >
> > > -	*best_clk = NULL;
> > >  	clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
> > >  			ourport->info->def_clk_sel;
> > >  	for (cnt = 0; cnt < info->num_clks; cnt++) {
> > > @@ -613,7 +612,7 @@ static unsigned int s3c24xx_serial_getclk(struct
> > s3c24xx_uart_port *ourport,
> > >
> > >  		sprintf(clkname, "clk_uart_baud%d", cnt);
> > >  		clk = clk_get(ourport->port.dev, clkname);
> > > -		if (IS_ERR_OR_NULL(clk))
> > > +		if (IS_ERR(clk))
> > >  			continue;
> > >
> > >  		rate = clk_get_rate(clk);
> > > @@ -684,7 +683,7 @@ static void s3c24xx_serial_set_termios(struct
> > uart_port *port,
> > >  {
> > >  	struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
> > >  	struct s3c24xx_uart_port *ourport = to_ourport(port);
> > > -	struct clk *clk = NULL;
> > > +	struct clk *clk = ERR_PTR(-EINVAL);
> > >  	unsigned long flags;
> > >  	unsigned int baud, quot, clk_sel = 0;
> > >  	unsigned int ulcon;
> > > @@ -705,7 +704,7 @@ static void s3c24xx_serial_set_termios(struct
> > uart_port *port,
> > >  	quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
> > >  	if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
> > >  		quot = port->custom_divisor;
> > > -	if (!clk)
> > > +	if (IS_ERR(clk))
> > >  		return;
> > >
> > >  	/* check to see if we need  to change clock source */
> > > @@ -713,9 +712,9 @@ static void s3c24xx_serial_set_termios(struct
> > uart_port *port,
> > >  	if (ourport->baudclk != clk) {
> > >  		s3c24xx_serial_setsource(port, clk_sel);
> > >
> > > -		if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
> > > +		if (!IS_ERR(ourport->baudclk)) {
> > >  			clk_disable(ourport->baudclk);
> > > -			ourport->baudclk  = NULL;
> > > +			ourport->baudclk = ERR_PTR(-EINVAL);
> > >  		}
> > >
> > >  		clk_enable(clk);
> > > @@ -1160,6 +1159,9 @@ static ssize_t s3c24xx_serial_show_clksrc(struct
> > device *dev,
> > >  	struct uart_port *port = s3c24xx_dev_to_port(dev);
> > >  	struct s3c24xx_uart_port *ourport = to_ourport(port);
> > >
> > > +	if (IS_ERR(ourport->baudclk))
> > > +		return -EINVAL;
> > > +
> > >  	return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name);
> > >  }
> > >
> > > @@ -1200,6 +1202,7 @@ static int s3c24xx_serial_probe(struct
> > platform_device *pdev)
> > >  		return -ENODEV;
> > >  	}
> > >
> > > +	ourport->baudclk = ERR_PTR(-EINVAL);
> > >  	ourport->info = ourport->drv_data->info;
> > >  	ourport->cfg = (pdev->dev.platform_data) ?
> > >  			(struct s3c2410_uartcfg *)pdev->dev.platform_data :
> > > @@ -1387,7 +1390,7 @@ s3c24xx_serial_get_options(struct uart_port
> *port,
> > int *baud,
> > >  		sprintf(clk_name, "clk_uart_baud%d", clk_sel);
> > >
> > >  		clk = clk_get(port->dev, clk_name);
> > > -		if (!IS_ERR(clk) && clk != NULL)
> > > +		if (!IS_ERR(clk))
> > >  			rate = clk_get_rate(clk);
> > >  		else
> > >  			rate = 1;
> > > --
> > > 1.7.1
> 
> Looks ok to me, will apply.
> Thanks.
> 
(Cc'ed Greg)

I think, would be better if Greg could pick this up in his tree.

Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux