Re: [PATCH v2 5/6] spi: s3c64xx: Remove the 'set_level' callback from controller data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 18 May 2012 15:03:32 +0530, Thomas Abraham <thomas.abraham@xxxxxxxxxx> wrote:
> The set_level callback in the controller data, which is used to configure
> the slave select line, cannot be supported when migrating the driver to
> device tree based discovery. Since all the platforms currently use gpio
> as the slave select line, this callback can be removed from the
> controller data and replaced with call to gpio_set_value in the driver.
> 
> Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
> Acked-by: Jaswinder Singh <jaswinder.singh@xxxxxxxxxx>

Acked-by: Grant Likely <grant.likely@xxxxxxxxxxxx>

> ---
>  arch/arm/plat-samsung/include/plat/s3c64xx-spi.h |    2 --
>  drivers/spi/spi-s3c64xx.c                        |    8 ++++----
>  2 files changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
> index a733ce9..48a6495 100644
> --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
> +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
> @@ -18,7 +18,6 @@ struct platform_device;
>   * @fb_delay: Slave specific feedback delay.
>   *            Refer to FB_CLK_SEL register definition in SPI chapter.
>   * @line: Custom 'identity' of the CS line.
> - * @set_level: CS line control.
>   *
>   * This is per SPI-Slave Chipselect information.
>   * Allocate and initialize one in machine init code and make the
> @@ -27,7 +26,6 @@ struct platform_device;
>  struct s3c64xx_spi_csinfo {
>  	u8 fb_delay;
>  	unsigned line;
> -	void (*set_level)(unsigned line_id, int lvl);
>  };
>  
>  /**
> diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
> index f6bc0e3..d84ce7f 100644
> --- a/drivers/spi/spi-s3c64xx.c
> +++ b/drivers/spi/spi-s3c64xx.c
> @@ -406,14 +406,14 @@ static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd,
>  		if (sdd->tgl_spi != spi) { /* if last mssg on diff device */
>  			/* Deselect the last toggled device */
>  			cs = sdd->tgl_spi->controller_data;
> -			cs->set_level(cs->line,
> -					spi->mode & SPI_CS_HIGH ? 0 : 1);
> +			gpio_set_value(cs->line,
> +				spi->mode & SPI_CS_HIGH ? 0 : 1);
>  		}
>  		sdd->tgl_spi = NULL;
>  	}
>  
>  	cs = spi->controller_data;
> -	cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0);
> +	gpio_set_value(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0);
>  }
>  
>  static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd,
> @@ -499,7 +499,7 @@ static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd,
>  	if (sdd->tgl_spi == spi)
>  		sdd->tgl_spi = NULL;
>  
> -	cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1);
> +	gpio_set_value(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1);
>  }
>  
>  static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
> -- 
> 1.6.6.rc2
> 

-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux