Re: [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2012/3/22 Kukjin Kim <kgene.kim@xxxxxxxxxxx>:
> On 03/21/12 03:45, Marek Szyprowski wrote:
>>
>> Hello,
>>
>> On Wednesday, March 21, 2012 10:14 AM Thomas Abraham wrote:
>>
>>> On 14 March 2012 20:12, Kukjin Kim<kgene.kim@xxxxxxxxxxx>  wrote:
>>>>
>>>> Actually, the base address of uart is different between EXYNOS4
>>>> and EXYNOS5 and this patch enables to support uart for EXYNOS4
>>>> and EXYNOS5 SoCs at runtime.
>>>>
>>>> Signed-off-by: Kukjin Kim<kgene.kim@xxxxxxxxxxx>
>>>> ---
>>>
>>>
>>> [...]
>>>
>>>> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S
>>>> b/arch/arm/mach-
>>>
>>> exynos/include/mach/debug-macro.S
>>>>
>>>> index 6cacf16..6c857ff 100644
>>>> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
>>>> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
>>>> @@ -21,8 +21,13 @@
>>>>         */
>>>>
>>>>        .macro addruart, rp, rv, tmp
>>>> -               ldr     \rp, = S3C_PA_UART
>>>> -               ldr     \rv, = S3C_VA_UART
>>>> +               mov     \rp, #0x10000000
>>>
>>>
>>> This is physical address of Exynos4/5 CPUID register which cannot be
>>> used here. And virtual address S5P_VA_CPUID also cannot be used here
>>> since this will be called before paging_init when earlyprintk boot
>>> param is used. So, with this change, earlyprintk does not work for
>>> both Exynos4 and Exynos5.
>>
>>
>> I confirm, printascii freeze the system on EXYNOS4 after that patch,
>> tested on Exynos4210 Nuri board.
>>
> Hi,
>
> I think, it can be solved with following and if no problems, it will be
> fixed during v3.4-rcX.
>
> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S
> b/arch/arm/mach-exynos/in
> index 6c857ff..a865417 100644
> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
> @@ -21,10 +21,10 @@
>
>         */
>
>        .macro addruart, rp, rv, tmp
> -               mov     \rp, #0x10000000
> -               ldr     \rp, [\rp, #0x0]
> -               and     \rp, \rp, #0xf00000
> -               teq     \rp, #0x500000          @@ EXYNOS5
> +               mrc     p15, 0, \tmp, c0, c0, 0
> +               and     \tmp, \tmp, #0xf0
> +               teq     \tmp, #0xf0             @@ A15
> +
>                ldreq   \rp, =EXYNOS5_PA_UART
>
>                movne   \rp, #EXYNOS4_PA_UART   @@ EXYNOS4
>                ldr     \rv, =S3C_VA_UART
>

Dear Mr. Kim,

I have tested the above patch on Exynos5. Thanks.

Tested-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux