On 03/25/2012 11:16 AM, Thomas Abraham wrote:
> On 25 March 2012 20:50, Rob Herring <robherring2@xxxxxxxxx> wrote:
>> On 03/25/2012 07:38 AM, Thomas Abraham wrote:
>>> The of_irq_init function stops processing the interrupt controller hierarchy
>>> when there are no more interrupt controller parents identified. Though this
>>> condition suffices most cases, there are cases where a interrupt controller's
>>> parent controller does not participate in the initialization of the interrupt
>>> hierarchy. An example of such a case is the use of a interrupt nexus node
>>> by a interrupt controller node which delivers interrupts to separate interrupt
>>> parent controllers.
>>>
>>> Instead of stopping the processing of interrupt controller hierarchy in such
>>> a case, the orphan interrupt controller node's descriptor can be identified
>>> and its 'logical' parent in the descriptor is set as NULL. The processing of
>>> interrupt hierarchy is then restarted by looking for descriptors which have
>>> a NULL interrupt parent.
>>>
>>> Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
>>> Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
>>> Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
>>> ---
>>
>> Wouldn't this accomplish the same thing? You just need to add the
>> wakeup-map node name to your matches list.
>>
>>
>> diff --git a/drivers/of/irq.c b/drivers/of/irq.c
>> index 9cf0060..deeaf00 100644
>> --- a/drivers/of/irq.c
>> +++ b/drivers/of/irq.c
>> @@ -416,8 +416,6 @@ void __init of_irq_init(const struct of_device_id
>> *matches)
>> INIT_LIST_HEAD(&intc_parent_list);
>>
>> for_each_matching_node(np, matches) {
>> - if (!of_find_property(np, "interrupt-controller", NULL))
>> - continue;
>> /*
>> * Here, we allocate and populate an intc_desc with the node
>> * pointer, interrupt-parent device_node etc.
>>
>
> Hi Rob,
>
> I tested with this, but the init function of wakeup controller is not
> called. The following is the example nodes that I used for testing.
>
> gic:interrupt-controller@10490000 {
> compatible = "arm,cortex-a9-gic";
> #interrupt-cells = <3>;
> #address-cells = <0>;
> #size-cells = <0>;
> interrupt-controller;
> cpu-offset = <0x8000>;
> reg = <0x10490000 0x1000>, <0x10480000 0x100>;
> };
>
> combiner:interrupt-controller@10440000 {
> compatible = "samsung,exynos4210-combiner";
> #interrupt-cells = <2>;
> interrupt-controller;
> samsung,combiner-nr = <16>;
> reg = <0x10440000 0x1000>;
> interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
> <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
> <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
> <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
> };
>
> wakeup_eint: interrupt-controller@11400000 {
> compatible = "samsung,exynos5210-wakeup-eint";
> reg = <0x11400000 0x1000>;
> interrupt-controller;
> #interrupt-cells = <2>;
> interrupt-parent = <&wakeup_map>;
> interrupts = <0x0 0>, <0x1 0>, <0x2 0>, <0x3 0>,
> <0x4 0>, <0x5 0>, <0x6 0>, <0x7 0>,
> <0x8 0>, <0x9 0>, <0xa 0>, <0xb 0>,
> <0xc 0>, <0xd 0>, <0xe 0>, <0xf 0>,
> <0x10 0>;
>
> wakeup_map: interrupt-map {
> compatible = "samsung,exynos5210-wakeup-eint-map";
> #interrupt-cells = <2>;
> #address-cells = <0>;
> #size-cells = <0>;
> interrupt-map = <0x0 0 &gic 0 16 0>,
> <0x1 0 &gic 0 17 0>,
> <0x2 0 &gic 0 18 0>,
> <0x3 0 &gic 0 19 1>,
> <0x4 0 &gic 0 20 0>,
> <0x5 0 &gic 0 21 1>,
> <0x6 0 &gic 0 22 0>,
> <0x7 0 &gic 0 23 1>,
> <0x8 0 &gic 0 24 0>,
> <0x9 0 &gic 0 25 1>,
> <0xa 0 &gic 0 26 0>,
> <0xb 0 &gic 0 27 1>,
> <0xc 0 &gic 0 28 0>,
> <0xd 0 &gic 0 29 1>,
> <0xe 0 &gic 0 30 0>,
> <0xf 0 &gic 0 31 1>,
> <0x10 0 &combiner 2 4>;
> };
> };
>
> And following is the match table used for testing.
>
> static const struct of_device_id exynos4_dt_irq_match[] = {
> { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
> { .compatible = "samsung,exynos4210-combiner",
> .data = combiner_of_init, },
> { .compatible = "samsung,exynos4210-wakeup-eint-map",
Looks like you have a mismatch here: 5210 or 4210?
> .data = exynos_init_irq_eint, },
> {},
> };
>
> The ' interrupt-map' map sub-node of 'interrupt-controller@11400000'
> node does not have a interrupt-parent property. So it inherits it from
> its parent node, which is 'interrupt-map' itself. So the parent of
> wakeup-map is not gic or combiner and hence the initialization
> function of wakeup controller is not called.
>
That should be fine. If a node's interrupt-parent is itself, then that's
treated as a root interrupt controller.
> If a interrupt-parent property is added to 'interrupt-map' node (which
> is probably not the right thing to do), and set the interrupt parent
> as gic or combiner, there is a possibility that the interrupt-map is
> initialized before the combiner (which is not correct since
> interrupt-map uses combiner as one of its parents). But by placing
> 'wakeup_eint' node ahead of combiner node, this can be overcome but
> relying on placement of nodes in dts file is not a reliable solution.
Your fix doesn't really guarantee the proper order either. It's still a
side effect of the implementation. Perhaps a retry mechanism would work.
Then the init for wakeup_eint can retry if the gic is not yet setup.
Rob
> Thanks,
> Thomas.
>
>>
>>> drivers/of/irq.c | 45 ++++++++++++++++++++++++++++++++++++++++++++-
>>> 1 files changed, 44 insertions(+), 1 deletions(-)
>>>
>>> diff --git a/drivers/of/irq.c b/drivers/of/irq.c
>>> index 9cf0060..70c6ece 100644
>>> --- a/drivers/of/irq.c
>>> +++ b/drivers/of/irq.c
>>> @@ -400,6 +400,38 @@ struct intc_desc {
>>> };
>>>
>>> /**
>>> + * of_irq_mark_orphan_desc - Set parent as NULL for a orphan intc_desc
>>> + * @intc_desc_list: the list of intc_desc to search for orphan intc_desc
>>> + *
>>> + * This is a helper function for the of_irq_init function and is invoked
>>> + * when there are child nodes available in intc_desc_list but there are
>>> + * no parent nodes in intc_parent_list. When invoked, this function
>>> + * searches for a intc_desc instance that does not have a parent intc_desc
>>> + * instance in intc_desc_list. The very reason of the invocation of this
>>> + * function ensures that a orphan intc_desc will be found. When found, the
>>> + * interrupt_parent of the orphan intc_desc is set to NULL.
>>> + */
>>> +static void of_irq_mark_orphan_desc(struct list_head *intc_desc_list)
>>> +{
>>> + struct intc_desc *desc, *temp_desc;
>>> +
>>> + list_for_each_entry_safe(desc, temp_desc, intc_desc_list, list) {
>>> + struct intc_desc *td1, *td2;
>>> + list_for_each_entry_safe(td1, td2, intc_desc_list, list) {
>>> + if (desc->interrupt_parent == td1->dev)
>>> + break;
>>> + }
>>> + if (desc->interrupt_parent == td1->dev)
>>> + continue;
>>> +
>>> + pr_debug("%s: set interrupt_parent of 'intc_desc' with dev name"
>>> + " %s as NULL\n", __func__, desc->dev->full_name);
>>> + desc->interrupt_parent = NULL;
>>> + return;
>>> + }
>>> +}
>>> +
>>> +/**
>>> * of_irq_init - Scan and init matching interrupt controllers in DT
>>> * @matches: 0 terminated array of nodes to match and init function to call
>>> *
>>> @@ -481,8 +513,19 @@ void __init of_irq_init(const struct of_device_id *matches)
>>> /* Get the next pending parent that might have children */
>>> desc = list_first_entry(&intc_parent_list, typeof(*desc), list);
>>> if (list_empty(&intc_parent_list) || !desc) {
>>> + /*
>>> + * This has reached a point where there are children in
>>> + * the intc_desc_list but no parent in intc_parent_list.
>>> + * This means there is a child desc in intc_desc_list
>>> + * whose parent is not one of the remaining elements of
>>> + * the intc_desc_list. Such a child node is marked as
>>> + * orphan (interrupt_parent is set to NULL) and the
>>> + * process continues with parent set to NULL.
>>> + */
>>> pr_err("of_irq_init: children remain, but no parents\n");
>>> - break;
>>> + of_irq_mark_orphan_desc(&intc_desc_list);
>>> + parent = NULL;
>>> + continue;
>>> }
>>> list_del(&desc->list);
>>> parent = desc->dev;
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
