Jingoo Han wrote:
>
> Hi, Tushar.
>
> Tushar Behera wrote:
> > -----Original Message-----
> > Subject: [PATCH] ARM: EXYNOS: Add USB OHCI support to ORIGEN board
> >
> > Signed-off-by: Tushar Behera <tushar.behera@xxxxxxxxxx>
> > Signed-off-by: Angus Ainslie <angus.ainslie@xxxxxxxxxx>
>
> Acked-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
>
OK, will apply.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
> Thanks.
>
> Best regards,
> Jingoo Han
> > ---
> >
> > This patch are based Kukjin's for-next branch and OHCI related
> > patches from Jingoo Han.
> > [PATCH v2 0/3] Support Samsung Exynos OHCI device and driver
> >
> > arch/arm/mach-exynos/Kconfig | 1 +
> > arch/arm/mach-exynos/mach-origen.c | 13 +++++++++++++
> > 2 files changed, 14 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> > index bd1bb9f1..0da2ced 100644
> > --- a/arch/arm/mach-exynos/Kconfig
> > +++ b/arch/arm/mach-exynos/Kconfig
> > @@ -304,6 +304,7 @@ config MACH_ORIGEN
> > select SAMSUNG_DEV_PWM
> > select EXYNOS4_DEV_DMA
> > select EXYNOS4_DEV_PD
> > + select EXYNOS4_DEV_USB_OHCI
> > select EXYNOS4_SETUP_FIMD0
> > select EXYNOS4_SETUP_SDHCI
> > select EXYNOS4_SETUP_USB_PHY
> > diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-
> exynos/mach-origen.c
> > index f56d027..a0116036 100644
> > --- a/arch/arm/mach-exynos/mach-origen.c
> > +++ b/arch/arm/mach-exynos/mach-origen.c
> > @@ -42,6 +42,7 @@
> > #include <plat/fb.h>
> > #include <plat/mfc.h>
> >
> > +#include <mach/ohci.h>
> > #include <mach/map.h>
> >
> > /* Following are default values for UCON, ULCON and UFCON UART
> registers */
> > @@ -487,6 +488,16 @@ static void __init origen_ehci_init(void)
> > s5p_ehci_set_platdata(pdata);
> > }
> >
> > +/* USB OHCI */
> > +static struct exynos4_ohci_platdata origen_ohci_pdata;
> > +
> > +static void __init origen_ohci_init(void)
> > +{
> > + struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata;
> > +
> > + exynos4_ohci_set_platdata(pdata);
> > +}
> > +
> > static struct gpio_keys_button origen_gpio_keys_table[] = {
> > {
> > .code = KEY_MENU,
> > @@ -627,6 +638,7 @@ static struct platform_device *origen_devices[]
> __initdata = {
> > &s5p_device_mfc_l,
> > &s5p_device_mfc_r,
> > &s5p_device_mixer,
> > + &exynos4_device_ohci,
> > &exynos4_device_pd[PD_LCD0],
> > &exynos4_device_pd[PD_TV],
> > &exynos4_device_pd[PD_G3D],
> > @@ -702,6 +714,7 @@ static void __init origen_machine_init(void)
> > s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
> >
> > origen_ehci_init();
> > + origen_ohci_init();
> > clk_xusbxti.rate = 24000000;
> >
> > s5p_tv_setup();
> > --
> > 1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
